Argos Hygena 833/4448 User manual

Hygena Insert Tallboy
833/4448
Issue 1 - 4/19/13
35cm
30cm
170cm

Components - Panels
Please check you have all the panels listed below
12
4
7
11
Under left side panel Under right side panel
Door panel
Upper left side panel 12 Upper right side panel 13 Middle fixed shelf
Back rail
10
9Shelf x 2
8Upper back panel
2
If you have damaged or missing components,
call the Customer Helpline:08456 400800
Under back panel
5
3
6
Bottom panel
Top panel Adjustable shelf x 2

Components - Fittings
Please check you have all the fittings listed below
Note:The quantities below are the correct amount to complete the assembly .In some cases more
fittings may be supplied than are required.
D
A
G
JK
H
E
B C
F
I
L
NO
3
Ruler - Use this ruler to help correctly identify the screws
Tools required
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 4 5 6
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Drill
7mm Suitable drill bit
(for use with wall plug)
Eye protection
(when using a
hammer or glue)
Metal handle x 1 18mm Bolt x 2
12mm Screw x 11
45mm Screw x 2
35mm Screw x 416mm Screw x 4
Back panel hook x 4
Wall plug(for solid
walls only) x 2
Metal Support x 8
Hinge x 2
Magnetic Catch x 1 Strike Plate x 1
M
Wooden dowel x 8
Locking Pin x 20 Locking Nut x 20

Assembly Instructions
Assembling the upper unit
NOTE:It would be useful to ask
someone to help you at this stage.
Insert dowels into back rail .
Insert locking nuts into shelf
.
Attach upper left side panel to right
side panel with shelf and back
rail in the middle.
Tighten the locking nuts to secure
the unit.
Tighten the locking nuts to secure
the unit.
a:
b:
A
A
A
A
A
M
M
M
A
A
B
B
B
B
B
B
4
Step 1
B
B
A
a:Screw locking pins into upper
left side panel and upper right
side panel .
B
12
12
11
11
11
12
12
11
10
10
10
4
4
9
9
9
9
A
b: Screw locking pins into the
top panel .
Insert locking nuts into side
panels and .
Carefully attach top panel to
the unit,Pls make sure the grooves
are aligned.
Continued on next page
4
A
A
A
A
B
B
B
B
9
9

Assembly Instructions
c:
Step 1 - continued
Step 2
5
Insert dowels into upper side
NOTE:Pls make sure the holes in
the upper back panel match the
back rail .
panel & ,attach middle fixed
shelf to the upper side panels
with 35 screws .
Screw locking pins into middle
fixed shelf.
Use 12mm screws to fix
magnetic catch on middle fixed
shelf.
c:Carefully slide the upper back
panel into the groove of the unit.
Assembling bottom panel
NOTE:It would be useful to ask
someone to help you at this stage.
A
Screw locking pins into under
side panel & .
Insert locking nuts into bottom
panel .
Carefully attach bottom panel to
under side panels. Pls make sure
the grooves are aligned.
B
B
B
A
A
A
A
L
F
M
F
F
M
M
F
D
D
D
L
L
L
L
A
A
A
A
1
13
12
10
8
12
11
11
13
2
8
8
5
5
2
1
Assembling the upper unit
B
B
A
Tighten the locking nuts to secure
the unit.

Assembly Instructions
Assembling the unit.
NOTE:It would be useful to ask
someone to help you at this stage.
Step 3
a:Carefully slide under back panel
into the under unit.
Insert locking nuts into under
lelf side panel and right side
panel .
B
B
B
K
J
B
6
a: b:
BB
3
1
2
4
3
3
1
1
2
2
Attach the upper unit onto the under
b:Insert back panel hook into the
groove of under side panel
and use 16mm screw to fix back
panel hook to the under unit.
unit , tighten the locking nuts
to secure the unit.
K
J
K
K
K
J
J
J

Assembly Instructions
Assembling door panel
Step 4
H
C
C
C
C
F
F
F
F
F
F
7
a:
b:
C
F
F
E
H
I
a:Use 12mm screw to fix strike
Use 12mm screws to fix hinges
onto the door panel.
plate onto the door panel .
Use 18mm bolts to fix metal
handle onto door panel.
b:Attach door panel onto the
unit by fixing hinge with screw .
7
NOTE:It would be useful to ask
someone to help you at this stage.
7
I
7
7
F
E

A
8
NOTE:If you have damaged or missing components,
call the Customer Helpline:08456 400800
Argos LTD,489-499 Avebury Boulevard,
Central Milton Keynes, MK9 2NW
6
6
2
J
Assembly Instructions
Step 6
Step 5
NOTE:It would be useful to ask
someone to help you at this stage.
NOTE:It would be useful to ask
someone to help you at this stage.
Insert metal supports into side
panels .
Carefully put the adjustable shelf
panel on it.
Fixing to the wall
Assembling adjustable shelf
panel
NOTE: Please make sure the unit
is secure before use.
The assembly is now complete.
G
Use 45mm screws and wall
plugs to fix the unit on the wall.
6
122
G
G
G
N
O
O
O
N

A Guide to - Wall Mounting & Fixings
Revision 2 - 7/10/09
Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
a specialist tting in this case. For light
loads, general purpose wall plugs can
be used.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
For use when tting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
plasterboard. The hammer xing allows
it to be xed to the wall rather than the
plasterboard. Always check the xing
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well tted and are a tight t in the
drilled hole.
If plastic wall plugs
are supplied with your
product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
using incorrect xings is the
responsibility of the installer.