Fender CYBER DELUXE User manual

CYBER DELUXE
p/n 022-9001-000 (120V)
SERVICE MANUAL
CONTENTS:
Notices
Specifications
Service notes
Troubleshooting guide
Troubleshooting flow charts
Preset/Parameter charts
Parts lists:
Main PCB assembly
FP/RP/PA PCB assembly
Chassis assembly
Cabinet assembly
End item assembly
Schematics/diagrams
Fender Musical Instruments Corp. 8860 East Chaparral Road Suite 100 Scottsdale, AZ 85250

CYBER DELUXE
(This is the model name for warranty claims)
SERVICE MANUAL
JANUARY 2002
IMPORTANT NOTICE:
The information contained herein is CONFIDENTIAL and PROPRIETARY to Fender Musical Instruments Corp. It is
disclosed solely for use by qualified technicians for purposes of equipment maintenance and service. It may not be
disclosed to others without the expressed permission of Fender Musical Instruments Co. All specifications subject to
change without notice.
Only Fender specified part numbers are to be used for warranty repair service. It is recommended they also be used
for post-warranty maintenance and repair.
Parts marked with two asterisks (**) indicate the required use of that specific part. This is necessary for RELIABILITY
and SAFETY requirements. DO NOT USE A SUBSTITUTE!
A coded naming convention is used in the description of certain parts. The codes and what they mean are as follows:
CAPACITOR CODES HARDWARE CODES ____
CAP AE = Aluminum Electrolytic BLX = Black Oxide
CAP CA = Ceramic Axial CR = Chrome Plated
CAP CD = Ceramic Disk HWH = Hex Washer Head
CAP MPF = Metalized Polyester Film M = Machine Screw
CAP MY = Mylar NI = Nickel Plated
CAP PFF = Polyester Film/Foil OHP = Oval Head Phillips
PB = Particle Board
RESISTOR CODES PHP = Pan Head Phillips
PHPS = Pan Head Phillips Sems
RES CC = Carbon Comp SMA = Sheet Metal "A" Point
RES CF = Carbon Film SMB = Sheet Metal "B" Point
RES FP = Flame Proof SS = Stainless Steel
RES MF = Metal Film TF = Thread Forming
RES WW = Wire Wound ZI = Zinc Plated

CYBER DELUXE
SPECIFICATIONS
Product Release No.: PR 444 (This is not a model number)
Part Number: 120V,60Hz USA: 22-9001 110V,60Hz TW: 22-9011
240V,50Hz AUS: 22-9031 230V,50Hz UK: 22-9041
220V,50Hz ARG: 22-9051 230V,50Hz EUR: 22-9061
100V,50Hz JPN: 22-9071 220V,60Hz ROK: 22-9091
Power Requirements: 180W
Power output: 65 Watts RMS @ 5% THD
Rated load impedance: 8Ω
Sensitivity: Adjustable using the trim control
Preamp input impedance: >1MegΩ(min)
Effects Loop:
Send impedance: 240Ω, impedance balanced
Return impedance: 12kΩ(min), impedance balanced
Nominal level: -10 dBV/+4dBu switchable
Speaker Complement: One 8ΩCelestion G12T-100 12" speaker (P/N 0054420000)
Fuses Primary: 4A (100V/120V units, 1.6A (230V/240V units)
Secondary: 1A (digital supply)
Footswitch: 4-button preset quick-access, (p/n 0057219000) 5-pin
DIN cord,supplied
Expression pedal: 1/4” (tip-sleeve) analog, compatible with any passive volume
pedal,10kΩto 250kΩ(use a pedal having a 20kΩ
potentiometer with a 25A taper, for optimum performance)
MIDI jacks: IN, OUT
Headphones jack: 1/4” Stereo
Dimensions: Height:18-1/2" (47 cm)
Width: 22-27/32" (58 cm)
Depth: 11-3/16" (28.4 cm)
Weight: 43 lbs. (19.6 kg)
Product specifications are subject to change without notice

CYBER DELUXE
SERVICE NOTES
Fender Cyber-Deluxe Step by Step Troubleshooting Guide for Hardware Problems
NO AUDIO
Setup: Follow the instructions as stated under notes 8, on the Cyber-Deluxe Main Schematics
(0056389000 Sheet1).
1. Turn on the power to the Cyber-Deluxe and press the Manual button.
2. Do the tone control LED’s come on?
2.1 If the LED’s do not come on, but there is Audio, check the ribbon cables and LED’s.
2.2 If the LED’s do not come on and there is no Audio, check the power supplies.
3 Does the 7-segment display come on?
3.1 If the 7-segment display does not come on, but there is Audio, check the display.
3.2 If the 7-segment display does not come on and there is no Audio, check the power supplies.
3.2.1 If the power supplies are OK then check the ribbon cables.
3.2.2 If the ribbon cables are OK, swap the Front Panel board .
4 If both the tone control LED’s and the 7-segment display come on, but there is no audio, then check the
speaker connections. Remove any rear panel audio connections (Headphones, FX etc).
5 If the Speaker is OK and there is no Audio, then check the power supplies.
6 If the power supplies are OK, check for Audio on Effects Send.
6.1 If there is no Audio on Effects Send:
6.1.1 Check for Audio on U1 Pin1 on the Main PCB.
6.1.2 If there is Audio on U1, then swap the Rear Panel PCB.
6.1.3 If there is no Audio on U1, then swap the Main PCB.
6.2 If there is Audio in Effects Send:
6.2.1 Check for Audio on P1 Pin10 on the Rear Panel PCB.
6.2.2 If there is no Audio on P1 Pin10, then swap the Rear Panel PCB.
6.2.3 If there is Audio on P1 Pin10, then check for Audio on TP2 & TP9 on the Main PCB.
6.2.4 If there is no Audio on TP2 & TP9, then swap the Main PCB.
6.2.5 If there is Audio on TP2 & TP9, then check for Audio on TP3 on the Main PCB.
6.2.6 If there is no Audio on TP3, then swap the Main PCB.
6.2.7 If there is Audio on TP3, then swap the Power Amp PCB.

CYBER DELUXE
Fender Cyber-Deluxe Step by Step Troubleshooting Guide for Hardware Problems (cont)
MIDI IS NOT WORKING
Setup: Follow the Midi Test instructions described on the Rear Panel Board Section Schematics
(0056392000 Sheet 2).
1. Check for Midi activity on the Midi test points TP18 & TP20.
2. Check for Midi activity on P2 Pin7&9.
2.1 If there is Midi activity on P2 Pin7&9, then swap Rear Panel board.
2.2 If there is no Midi activity on P2 Pin7&9, then check if ribbon cable on P2 is OK.
3 If the ribbon cable on P2 is OK, swap the Main PCB, otherwise swap the ribbon cable on P2.
HEADPHONES ARE NOT WORKING
Setup: Follow the instructions as stated under notes 8, on the Cyber-Deluxe Main Schematics
(0056389000 Sheet1).
1. Check for Audio Output through the Speaker with Headphones unplugged.
2. If there is no Audio Output through the Speaker proceed to the previous troubleshooting section NO
AUDIO.
3. If there is Audio Output through the Speaker, check if ribbon cable P1 is OK.
3.1. If the ribbon cable is OK, then swap the Rear Panel PCB.
3.2. If the ribbon cable is defective, then swap the cable.
FOOTSWITCH IS NOT WORKING
Setup: See Footswitch Notes on the Rear Panel Board Section Schematics (0056392000 Sheet 2).
1. Check the Voltage on U501 Pins 2,3,4,5.
2. If the Voltages are not correct check the power supply.
2.1. If the power supply is OK, swap Rear Panel PCB.
3. If the Voltages are correct check for Digital Activity on U501 Pins7&15.
3.1. If there is no Digital Activity on Pins7&15 check the Ribbon Cable P2 and swap if necessary.
3.1.1. If the Ribbon Cable on P2 is OK, swap the Main PCB.
4. If there is Digital Activity on Pins7&15, check for Digital Activity on U501 Pin13.
4.1. If there is no Digital Activity on Pin13, swap Rear Panel PCB. Otherwise, check the Ribbon Cable
P2 and swap if necessary.
4.1.1. If the Ribbon Cable on P2 is OK, swap the Main PCB.

CYBER DELUXE
Power-up Problems and Power-up Self-test Errors
At power-up, display is blank. Probable Host Processor (U28) boot/operation problem.
1. Check Host EPROM Socket and chip (U34) for wear, damage, or poor pin contact.
2. First check regulator devices and voltages. Inspect U17, U27, U19, U25 and associated parts. U17 pin 6
should be 0v (RESET). U17 pin 5 should be approx 5V (RESET(not)).
At power-up, a “Er” is displayed momentarily, “E3” is displayed. Probable DSP (U20) boot/operation problem.
The Host does not acknowledge response from the DSP processor communications port.
1. Press EXIT. The normal host prelude should be displayed. Change to another preset. If “Er” is
displayed, then “b2”, then followed six sets of two characters (and repeats), the Host is O.K. and the DSP
processor is not operating, or communication is faulty.
2. Check DSP EPROM Socket and chip (U23) for wear, damage, or poor pin contact.
3. Check data and address lines between U20 & U23 for shorts due to foreign, conductive material.
Immediately after power up, a self-test error code is displayed. Probable localized memory device problem,
or a Host-DSP communications problem. Note each error code, and press EXIT until errors are not longer displayed.
1. "Er", then “E1” Host EEPROM Error. Check U26 device and lines.
2. "Er", then “E2” Host SRAM Error. Check U32 device and lines.
3. "Er", then “E3” Host-DSP Comm Error. Check DSP Processor (U20) and U23 device
and lines.
4. "Er", then “E4” DSP Self-Test Error. Check DSP Processor (U20) device and lines.
5. "Er", then “E6” DSP SRAM Error. Check U22 device and lines.
OTHER ERROR CODES
Customers may report an error code when invalid System Exclusive MIDI LOADS are attempted. The amp will
display "Er" momentarily, then “E8”. This indicates that the SysEx MIDI information is not in the expected format, or
that the number of preset “packets” dumped is incorrect. The error code is a non-destructive event. The user can
press EXIT and continue using the amplifier.
OTHER TEST UTILITIES
For troubleshooting problems in the analog channels and the CODECs, it maybe useful to place the Amplifier into
Field Test Mode. This mode configures the analog channels for test conditions referred to on the service diagram. It
also contains built-in tests for the clean and distortion channels.
To invoke the Field Test mode, perform the following procedure:
Turn the test fixture power OFF. Press the MANUAL and COMP buttons simultaneously and hold while turning the
test fixture power ON. In this test mode, the Data Wheel is used to select one of ten test setups, displayed as “t0”
through “t9”.
Field Test Mode Operation
In the Field Test Mode, the amplifier is configured with audio “pass through” conditions, which means the tone
controls, effects, and timbre filters are removed form the path. Gain, Volume, and Master settings are set up
automatically for each test setup, “t0” through “t9”. The built-in tests automatically perform a “frequency sweep” test
of

CYBER DELUXE
Power-up Problems and Power-up Self-test Errors (cont)
the clean and distortion channels, and report a fail or pass condition. This can help the technician narrow down a
problem to a specific audio channel. Refer to the Service Diagram for more detail on the audio circuitry.
To run the clean channel frequency sweep test, first make certain the INPUT jack is filled with a 1/4” phone plug (this
unmutes the analog channels). Set the test to “t0” using the data wheel. Press UTILITY to start the test. The entire
test will execute, displaying the measured signal values in hexadecimal. When the test is complete, the test result will
be reported as Pass (“PA”) or Fail (“FA”).
To run the distortion channel type 2 frequency sweep, set the test to “t1” using the data wheel and press UTILITY.
To run the distortion channel type 3 frequency sweep, set the test to “t2” using the data wheel and press UTILITY.
Press SAVE to refresh a field test setup.
Also, the display test may be executed when in the Field Test mode. Press the TUNER button top light the entire
display.
The Expander Switch (Q6) test is executed from the Field Test Mode. This test is required to acceptance test the FET
switch Q6 and supporting circuitry. Install a non-shorted 1/4” phone plug into the expander jack (this opens a
switch that enables the expander). Press the MANUAL button. “tE” is displayed to indicate the expander test setup.
With this test setup, a 1kHz signal is output to the speakers. When the expander switch on the rear panel (MONO
out, STEREO in) is in the MONO position, the tone should be audibly louder than when in the STEREO position. This
tests the transistor switch, Q6, on the Main board PCA.
Fender Cyber-Deluxe PCB Exchange Policy
Items whose parts numbers are marked with a single asterisk (*) in the itemized parts lists are not field
replaceable. If a failure due to one of these components is detected, please contact a Fender Customer
Service Representative for authorization to exchange the failed PCB Assembly. Replacement PCB
Assemblies will not be shipped without prior authorization from a Fender Customer Service Representative.

NO AUDIO
YES NO YES
NO
YES
YES NO YES NO
NO
YES NO YES NO NO YES
NO
YES YES NO
NO YES
NO YES NO YES
NO
YES NO
NO YES
NO
YES
YES
Power Switch
Enter
Manual
Mode 7-Segment
Display
On
Audio
Amp
OK
Audio
Audio
Ribbon Cables
OK
Speaker Plugged In
(Remove any plugs
from the rear panel)
Check
Display
Power Supplies
OK
Troubleshoot
Power Supplies
Power Supplies
OK
Plug In
Speakers
Troubleshoot
Power Supplies
Ribbon Cables
OK
Swap
Ribbon Cables
Swap
Front Panel PCB
Audio on
Effects Send
Audio on
U1 Pin1
Main PCB
Audio on
P1 Pin10 Rear
Panel PCB
Swap
Rear Panel PCB
Audio on
TP2 & TP9
Main PCB
Audio on
TP13 Main PCB
Swap
Main PCB
Swap
Main PCB
Audio on
TP11 Main
PCB
Swap
Main PCB
Swap
Power Amp
PCB
Swap
Main PCB
Tone Control
LED’s
On
Check
LED’s
Swap Ribbon
Cables
Audio on TP3
Main PCB

MIDI IS NOT WORKING
YES NO
YES NO
YES NO
Do Midi Test as described on
Rear Panel Board Section
Schematics
Midi is
working
Midi Activity on
TP 18,20
Midi Activity on
P2 Pin7&9
Swap
Rear Panel PCB
Ribbon Cable on P2
OK
Swap
Ribbon Cable
on P2
Swap
Main PCB

HEADPHONES ARE NOT WORKING
NO YES
NO YES
Audio Output
through Speakers
with Headphones unplugged
Proceed to
NO AUDIO
worksheet
Ribbon Cable
on P1 OK
Swap
Ribbon Cable
on P1
Swap
Rear Panel PCB

FOOTSWITCH IS NOT WORKING
NO YES
NO YES NO YES
NO YES NO YES
NO YES
See Footswitch Notes on
Rear Panel Board Section
Schematics
Power
Supply
OK
Voltage on
U501
Pins 2,3,4,5
Digital Activity on
U501 Pins 7&15
Troubleshoot
Power Supply
Swap
Rear Panel PCB
Ribbon Cable P2
OK
Digital Activity
on U501 Pin 13
Swap Rear Panel PCB
Ribbon Cable P2
OK
Swap Ribbon
Cable P2
Swap Main PCB
Swap Main PCBSwap Ribbon
Cable P2

CYBER DELUXE
PARTS LIST
NOTE: SHADED ITEMS ARE FOR REFERENCE ONLY
MAIN PRINTED CIRCUIT BOARD ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 * CAP 0805 CER 750pF 25V 5% C3
1 * CAP 0805 CER .0022uF 25V 5% C61
1 * CAP 0805 CER .0033uF 25V 5% C30
1 * CAP 0805 CER .015uF 25V 5% C35
8 * CAP 0805 CER .01uF 25V 5% C91 C94 C96 C106 C110-111 C114-115
84 * CAP 0805 CER .1uF 25V 5% C22 C59-60 C62 C64-66 C68 C70 C72-76 C81-84 C86-87
C89-90 C92 C98-104 C108 C112-113 C116-121 C124
C128-131 C133-134 C141-142 C150-151 C153 C158-159
C162-164 C169-170 C172-173 C175-177 C181 C183 C192-
193 C195-203 C209-216
3 * CAP 0805 CER .33uF 16V 5% C95 C135 C137
1 * CAP 0805 CER .47uF 16V 5% C97
6 * CAP 0805 CER 100pF 25V 5% C33 C43 C46 C69 C136 C143
13 * CAP 0805 CER 330pF 25V 5% C7-8 C20-21 C27 C38-39 C88 C109 C146 C149 C161 C224
25 * CAP 0805 CER 33pF 25V 5% C5 C12 C24 C34 C107 C144-145 C147 C152 C182 C184-
185 C187-188 C191 C194 C204-205 C207-208 C217-221
3 * CAP 0805 CER 820pF 25V 5% C2 C31 C48
5 * CAP 0805 CER .001uF 25V 5% C225-228 C56
2 * CAP 0805 CER .0082uF 25V 5% C229-230
24 * CAP 1206 CER .1uF 50V 5% C4 C6 C9-10 C14 C17-18 C29 C32 C36 C42 C49 C51 C54-
55 C79 C122-123 C125 C127 C132 C139-140 C148
6 * CAP 3528 TAN 10uF 16V 20% C26 C77-78 C85 C105 C168
2 * CAP 3528 TAN 4.7uF 16V 20% C63 C67
1 * CAP AE RDL .47uF 50V 20% C11
2 28463003 CAP AE RDL 10uF 50V 20% C126 C138
5 * CAP AE RDL 10uF 50V 20% C93 C156 C166-167 C190
1 * CAP AE RDL 2.2uF 50V 20% C80
1 33607000 CAP AE RDL 2200uF 35V 20% C178 - **
2 41048000 CAP AE RDL 2200uF 50V 20% C179-180 - **
15 * CAP AE RDL 22uF 50V 20% C1 C13 C15-16 C41 C44-45 C47 C50
C52 C58 C71 C154 C160 C171
3 * CAP AE RDL 4.7uF 50V 20% C25 C37 C57
2 28471003 CAP AE RDL 47uF 50V 20% C155 C157
1 * CAP AE RDL 47uF 50V 20% C165
1 * CAP MPF .0082uF 100V 10% C19
1 * CAP MPF .015uF 100V 10% C40
1 * CAP MPF .068uF 100V 10% C23
1 * CAP MPF .15uF 63V 10% C28
1 53860000 CAP MPF .1uF 250VAC 20% C206 - **
3 27278003 CAP MPF .1uF 63V 10% C174 C186 C189
1 56557000 CONTROL SNAPIN 25k 30A TAPER R61(trim)
9 27941000 CONTROL SNAPIN 50k B TAPER R98 R120 R131 R143 R150 R160 R180 R191 R200
(gain,volume,treble,mid,bass,master-volume,
reverb,mod f/x,delay)
4 20534000 DIODE 1N5402 RECTIFIER 200V C&F D30-33
4 29045000 DIODE 6A 400V 6A4 LEAD FORMED D39-42
22 * DIODE SMT 1N4448 SIGNAL D1-5 D7-9 D11-14 D16-18 D20 D34-37 D43-44
2 28119060 DIODE ZEN 1N5353B 16V 5W 5% D26-27
2 * FERRITE BEAD, LEADED L1-2
8 25802000 FSTN TAB MALE .250x.032 PCB MT P2-3 P8-9 P11-14
1 26000001 FSTN TAB MALE .187x.032 PCB MT P10
4 51094003 FUSE CLIP PCB 5mm (EXPT) F1-2 (2 EACH)
5 27419000 HDR .1 CTR 10 CKT SQ PIN P1A P3A P4A P5A P601A
1 27421000 HDR .1 CTR 12 CKT SQ PIN P2A
2 * IC COMPARATOR QUAD LM339D U16 U24
2 41812000 IC REGULATOR +5V MC7805CT U25 U27 - **
1 * IC SMT 12BIT COUNTER 74HCT4040 U15

CYBER DELUXE
MAIN PRINTED CIRCUIT BOARD ASSEMBLY (cont)
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 * IC SMT 3-TO-8 DECODER 74HC138 U14
1 * IC SMT 8-BIT A/D TLC542 U31
1*
IC SMT 8-BIT MICRO CONTROLLER 80C251G2D U28
5 * IC SMT 8BIT SHFT REG 74HC595 U29 U33 U36-38
2 * IC SMT CODEC AK4528 U10-11
1 * IC SMT DSP 24-BIT 56362PV120 U20
1 * IC SMT DUAL D FLIP-FLOP 74HC74 U13
1 * IC SMT EEPROM 4K X 8 24C32N-105C U26
1 57151XXX IC SMT HOST ROM CYBER-DELUXE U34 - ** (XXX = SOFTWARE REVISION)
1 57152XXX IC SMT DSP ROM CYBER-DELUXE U23 - ** (XXX = SOFTWARE REVISION)
1 * IC SMT OCT TRAN LATCH 74FCT573 U30
5 * IC SMT OP-AMP DUAL 4560 U2 U5 U7-8 U12
1 * IC SMT OP-AMP DUAL 5532AD8 U6
4 * IC SMT OP-AMP DUAL TL072CD U1 U3-4 U9
1 * IC SMT OSC 11.2896MHz U18
1 * IC SMT QUAD 2-IN NOR 74HC02 U35
1 * IC SMT QUAD 2-IN XOR 74AHC86 U39
1 * IC SMT RESET TL7705BC U17
3 * IC SMT SRAM 128Kx8 U21-22 U40
1 * IC SMT SRAM 32Kx8 U32
1 * IC SMT VREG +3.3V 1-A FAST U19
2 * IC SOCKET 32PLCC SMT FOR U23 & U34
1 53450000 JACK STEREO R/A J1
9 30755000 LED GREEN T-1 3mm DIFFUSED D19 D21-25 D28-29 D38
2 * LED RED LONG LEAD LUMEX D6 D10
1 57038000 LED BILEVEL RT. ANGLE D15
1 * RES 0805 MF 1/10W 5% 1.5k R60
10 * RES 0805 MF 1/10W 5% 100k R3 R21 R23 R31 R34 R40
R144 R148 R154 R161
5 * RES 0805 MF 1/10W 5% 100ohm R163 R165 R168 R181 R186
3 * RES 0805 MF 1/10W 5% 10M R25 R48 R58
38 * RES 0805 MF 1/10W 5% 10k R2 R9 R24 R44 R50-51 R73 R90-91 R94 R101 R109 R124-
126 R129 R133-134 R145 R147 R151-152 R156-158 R170
R175-176 R178 R183 R199 R201-203 R210 R212 R229
R233
5 * RES 0805 MF 1/10W 5% 10ohm R92-93 R138 R153 R184
2 * RES 0805 MF 1/10W 5% 13k R41 R52
3 * RES 0805 MF 1/10W 5% 150ohm R95 R100 R121
1 * RES 0805 MF 1/10W 5% 180k R76
2 * RES 0805 MF 1/10W 5% 180ohm R85 R87
1 * RES 0805 MF 1/10W 5% 1M R6
9 * RES 0805 MF 1/10W 5% 1k R54 R56 R62 R70 R74 R78 R84 R86 R111
2 * RES 0805 MF 1/10W 5% 2.2k R49 R81
2 * RES 0805 MF 1/10W 5% 20k R30 R104
3 * RES 0805 MF 1/10W 5% 220k R5 R128 R135
9 * RES 0805 MF 1/10W 5% 220ohm R97 R119 R130 R142 R149 R159 R179 R190 R198
8 * RES 0805 MF 1/10W 5% 22k R1 R7 R13 R19 R28 R46 R65 R89
4 * RES 0805 MF 1/10W 5% 22ohm R57 R107 R115 R166
7 * RES 0805 MF 1/10W 5% 2k R37 R66 R71-72 R77 R106 R108
1 * RES 0805 MF 1/10W 5% 3.3k R17
18 * RES 0805 MF 1/10W 5% 330ohm R59 R171-174 R188-189 R192-193 R196
R214-215 R227-228 R230-231 R79 R82
1 * RES 0805 MF 1/10W 5% 33k R12
8 * RES 0805 MF 1/10W 5% 390ohm R216-223
2 * RES 0805 MF 1/10W 5% 470k R16 R96
1 * RES 0805 MF 1/10W 5% 47k R33
18 * RES 0805 MF 1/10W 5% 47ohm R20 R22 R27 R102-103 R105 R110 R117-118 R155
R162 R167 R208-209 R224-226 R232
21 * RES 0805 MF 1/10W 5% 5.1k R4 R8 R10-11 R14-15 R35-36 R38-39 R42-43 R47
R53 R63-64 R68-69 R75 R80 R83

CYBER DELUXE
MAIN PRINTED CIRCUIT BOARD ASSEMBLY (cont)
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 * RES 0805 MF 1/10W 5% 5.6k R112
2 * RES 0805 MF 1/10W 5% 56k R18 R99
2 * RES 0805 MF 1/10W 5% 6.8k R45 R113
2 * RES 0805 MF 1/10W 5% 680ohm R55 R67
2 * RES 0805 MF 1/10W 5% 8.2k R29 R32
1 * RES 0805 MF 1/10W 5% 82k R26
11 * RES 0805 MF 1/10W 5% 560ohm R114 R116 R127 R132 R139 R164 R205-207 R211
R213
1 * RES CF 1/2W 5% 1.5k LL R122
1 30737001 RES CF 1/2W 5% 5.6ohm LL R182
1 * RES CF 1/4W 5% 10ohm LL R88
7 27627001 RES FILM 1W 5% 10ohm LL R123 R146 R177 R194-195 R197 R204 - **
4 28037000 RES WW BT 5W 10% 330ohm R169 R185 R234-235 - **
6 * XSTR SMT N-CH JFET J111 Q2-7
2 * XSTR SMT NPN 2N2222 Q1 Q15
7 * XSTR SMT PNP 2N4403 Q8-14
1 * XTAL SMT 12MHz VM6SSM2-18Pf Y2
1 13112000 FUSE TD 20MMX5MM 250V 1A F2 - **
REF 56389000 SRV DIA CMB MAIN PCB CYDLX
2 39420000 SCREW 4-40x3/8 PHP SS SEMS @ U25 AND U27
9 36178000 SPACER LED .5X.1 BROWN @ D19 D21-25 D28-29 D38
2 25796000 HEATSINK TO-220 @ U25 AND U27 - **
2 56907000 CAP EMI SUPPRESSION 0.0022Uf C222-223 (230/240V UNITS) - **
REF *OMITTED COMPONENTS C53 R136-137 C222-223
FP/RP/PA PRINTED CIRCUIT BOARD ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
5 0054303000 CABLE RIBBON 10 CKT 7.5” P1 P3-5 P601
1 0057173000 CABLE RIBBON 12 CKT 12” P2
1 * CAP AE AX 10Uf 35V 20% C46
2 * CAP AE RDL 100Uf 50V 20% C64 C68
4 * CAP AE RDL 10Uf 50V 20% C14 C59 C80 C82
1 * CAP AE RDL 1Uf 50V 20% C60
1 * CAP AE RDL 2.2Uf 50V 20% C66
11 * CAP AE RDL 22Uf 50V 20% C50 C56 C58 C65 C67 C74 C77 C81 C83 C95-96
2 * CAP CA 1000Pf 50V LL C48 C61
1 * CAP CA 2200Pf 100V C72
1 * CAP CA 220Pf 100V LL C18
4 * CAP CA 22Pf 100V LL C7-10
2 * CAP CA 3300Pf 100V C49 C62
9 * CAP CA 330Pf 100V LL C13 C19 C39 C87 C89 C97 C100-102
15 * CAP CA 33Pf 100V LL C6 C11 C15-17 C20 C23 C26 C28 C30-32
1 * CAP CA 470Pf 50V LL C27
2 * CAP CA 68Pf 100V LL C93-94
2 * CAP MPF 0.22uF 63V 10% C86 C103
11 * CAP CD 100Pf 500V 5% C40-41 C43 C55 C57 C75-76 C84-85 C90-91
2 * CAP CD 68Pf 500V 5% C54 C73
25 * CAP CR .1Uf 50V 20% .2” LS C1-5 C12 C21-22 C24-25 C29 C33 C35 C37-38 C42
C44-45 C47 C71 C78-79 C88 C98-99

CYBER DELUXE
FP/RP/PA PRINTED CIRCUIT BOARD ASSEMBLY (CONT)
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 * CAP MPF .1Uf 63V 10% C70
4 * CAP MPF .33Uf 63V 10% C52-53 C63 C69
3 0051931000 CONNECTOR DIN 5 PIN FEMALE J402 J404 J501
1 0027940000 CONTROL SNAPIN 50k 15A TAPER R78 (expand level)
8 * DIODE 1N4448 SIGNAL D7 D25-26 D29-30 D33 D35-36
5 0055983000 ENCODER 16-POS 4-BIT GRY CODE S1-3 S10 S15 - **
2 0025802001 FASTON TAB, .250” P6-7
4 * IC 8-BIT SHIFT REG 74HC166 U2-4 U501
7 * IC OP-AMP DUAL PC4560 U5 U401 U404-408
1 * IC OPTO-ISOLATOR 6N138 U402
1 * IC POWER AMP TDA7294V 100W U1
1 * IC QUAD 2-INPUT NAND GATE 74HC00 U403
1 0051658000 JACK MONO R/A J401 (expression pedal)
5 0053450000 JACK STEREO R/A J405-409 (send, return, expander, line-out right,
line-out left/mono)
1 0055595000 JACK STEREO R/A w/SL SHUNT J403 (headphones)
2 0056465000 LED 7 SEG CMN ANODE RED 13x18 D5 D8
17 0030755000 LED GREEN T-1 3mm DIFFUSED D1 D3-4 D6 D9-11 D13-17 D21 D27-28 D31-32
1 0049948003 LED RED LONG LEAD LUMEX D34
8 0030754000 LED RED T-1 3mm DIFFUSED D2 D12 D18-20 D22-24
2 0024970001 RES CF 1/4W 5% 1.8k LL R86 R119
13 0024997001 RES CF 1/4W 5% 100k LL R7 R36 R43-44 R67 R73 R81 R92 R99 R105 R121
R124 R128
18 0024952001 RES CF 1/4W 5% 100ohm LL R2-6 R8-10 R15-20 R22 R28 R76 R94
47 0024981001 RES CF 1/4W 5% 10k LL R1 R11-14 R23-26 R32-33 R38 R40 R49-52 R56-60 R63
R69 R71-72 R74 R84 R91 R100 R102-104 R108 R113-114
R120 R125-127 R129-132 R138-139 R142
2 * RES CF 1/4W 5% 10ohm LL R75 R93
2 * RES CF 1/4W 5% 12k LL R135-136
1 * RES CF 1/4W 5% 15k LL R115
1 * RES CF 1/4W 5% 1k LL R89
8 * RES CF 1/4W 5% 220ohm LL R31 R37 R98 R107 R109 R112 R122-123
2 * RES CF 1/4W 5% 22k LL R34 R110
4 * RES CF 1/4W 5% 24k LL R61-62 R79 R82
4 * RES CF 1/4W 5% 27k LL R85 R96 R134 R137
1 * RES CF 1/4W 5% 2k LL R35
4 * RES CF 1/4W 5% 3.3k LL R27 R68 R83 R95
2 * RES CF 1/4W 5% 3.9k LL R39 R140
4 * RES CF 1/4W 5% 300ohm LL R48 R66 R77 R80
1 * RES CF 1/4W 5% 330ohm LL R29
2 * RES CF 1/4W 5% 33k LL R90 R111
9 * RES CF 1/4W 5% 47ohm LL R42 R47 R53-55 R64-65 R117-118
3 * RES CF 1/4W 5% 5.1k LL R97 R101 R106
3 * RES CF 1/4W 5% 560ohm LL R21 R30 R41
1 * RES CF 1/4W 5% 680k LL R88
1 * RES CF 1/4W 5% 8.2k LL R45
1 * RES MOX 2W 5% 22ohm LL R116
1 * RES WW BT 5W 10% .1ohm R70
11 0055988000 SWITCH PB MOMENTARY SPST S16-18 S20-21 S23-28
3 0028091000 SWITCH PUSH SLFLK SHORT STROKE S4 S401-402
2 * XSTR N-CH JFET J111 TO-92 Q4-5
2 * XSTR NPN 2N4401 TO-92 Q2-3

CYBER DELUXE
FP/RP/PA PRINTED CIRCUIT BOARD ASSEMBLY (CONT)
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 * XSTR PNP 2N4403 TO-92 Q1
1 * HEAT SINK PLATE CYBER-DELUXE HS1
25 0054657000 SPACER LED VERTICAL .1X.2" @ D1-4 D6 D9-24 D27-28 D31-32
1 * SCREW 4-40x3/8 HWHS ZI .1” HD @ U1 & HS1
1 * INSULATOR MICA TDA7294 @ U1 & HS1
2 * SCRW TF 6-32x3/8 PHP ZI @ HS1
3 0048451000 BUTTON PUSH OFF WHITE @ S4 S401-402
2 0051660000 BRACKET R/A PC MNT #6-32 BK1-2
1 * WASHER SHLDR NYL 1/8x1/4 @ U1
6 0037985000 SCRW SMA 2X3/8 PHP BLX @ J402 J404 J501
REF 0056392000 SVC DIA CMB FP/RP/PA CYDLX
CHASSIS ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
REF 0040582000 SWITCH DPST .250 TAB GLOBAL 230V/240V - **
1 0039236000 SWITCH ROCKER DPST PSEUDO-IEC 100V/120V - **
10 0053986000 KNOB ROT ss W/ CH INS
1 0056340000 KNOB DATA WHEEL LARGE
1 0026790000 KNOB CONTROL THUMB BLACK @REAR PANEL POT
4 0057256000 KNOB ROT ARROW W/ CHROME INSERT BLK
WHT
1 0056395000 WIRE SET CHS 120/100V CYBER-DELUXE 100/120V - **
1 0057760000 WIRE SET CHS 230/240V CYBER-DELUXE 230/240V - **
1 0056554000 XFMR PWR 120V CYBER-DELUXE 65W **
REF 0056555000 XFMR PWR 230/240V CYBER-DELUXE 65W **
REF 0057162000 XFMR PWR 100V CYBER-DELUXE 65W **
1 * CHASSIS CYBER-DELUXE
1 0056386000 PANEL REAR CYBER-DELUXE
1 0056385000 PANEL FRONT CYBER-DELUXE
1 0054642000 CONNECTOR IEC SNAP IN POWER INLET - **
1 0039367000 SCRW M6-32x3/8 PHP SS INTL WSHR @ EMI PCB (230/240V ONLY)
5 0041595000 SCRW 6-32x3/16 PHP STL ZI SEMS @PCBs / PEM STANDOFFS
5 0051404000 STANDOFF NYLON BLK .375
1 0022186000 SCRW M6-32x3/8 PHP NI CHS GND
1 0056398000 HEATSINK BAR 65W CHIP **
5 0028500000 SCRW TF 8-32x3/4 HWH SLTD ZI @HEATSINK
1 0053479000 NUT, HEX 7/16-20X1/8 NI @FRONT IN JACK ONLY
1 0053480000 WASHER FLAT .442 X .692 NI @FRONT IN JACK ONLY
1 0028560000 END BELL XFMR 85W @XFMR - **
4 0028591000 NUT ACORN 8-32 @XFMR - **
4 0030007000 WSHR LCK INTL 8x.330x.02 ZI @XFMR - **
2 0014999000 SCRW M 6-32x1/4 PHP BLX @REAR PANEL
7 0055838000 NUT PLASTIC BLK REAN JACK @REAR JACKS
1 0021709000 BUSHING SR .437x.062x13/32 BLK @SPEAKER WIRE - **
1 0069393000 NUT 6-32 HEX EXT LOCK @CHS GND
1 0053884000 FUSE QA 20mmX5mm 125V4A ULCSA 100V/120V - **
REF 0020793000 FUSE QA 20mmx5mm 250v 1.6A EXPORT 220-240V - **

CYBER DELUXE
CABINET ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
4 0026566000 CORNER 2 HOLE W/ TAB NI
2 0026568000 CORNER 3 HOLE NI
4 0019276000 GLIDE CAB 1.24 X .335 NI
4 0019275000 INSERT GLIDE CUSHION 1.27 DIA
1 0027846000 HANDLE 9.25" NO LOGO
1 0032524000 INSERT HANDLE
2 0019279000 HANDLE CAP 2 HOLE NICKEL
10 0026571000 SCREW SMAB 8X5/8 THP NI
8 0021972000 NUT T 10-32X3/4 STR 3 PRNG BLX
4 0022244000 SCRW M 10-32 X 1-1/8 OHP NI
4 0026625000 SCREW WOOD 8X1 FH
REF 0029085000 VELCRO STRIP LOOP 1.5" WD BLK
REF 0029086000 VELCRO STRIP HOOK 1.5" WD BLK
REF 0026570000 TOLEX BRAVURA BLACK
REF 0032793000 TAPE ALUM 7-1/2" X 60 YD
REF 0037788000 GRILLE CLOTH BLK / SILVER
END ITEM ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 0029906000 NAMEPLATE FENDER GENERIC SMALL
1 0054420000 SPEAKER CELESTION G12T-100
6 0036199000 SCRW M 8-32x1-3/16 OHP BLX CP @CHS (PEM)
2 0018113000 SCRW SMA 4X1/2 OHP BLX @LOGO
4 0026577000 SCRW M 10-32x1 PHP BLX @SPKR
6 0029527000 WSHR FNSH 8-5/8 FLNGD BLX WX @CHS / GRILLE
10057671000 COVER CYBER-DELUXE (OPTIONAL)
1 0057219000 FOOTSWITCH 4 BTN DSP
REF 0057213000 SCHEMATIC FOOTSWITCH 4-BTN DSP
10056399000 CAB ASSY CYBER-DELUXE
1 0047248000 CORD PWR W/ IEC CONN DOM
REF 0047250000 CORD PWR W/ IEC CONN 250V
REF 0047249000 CORD PWR W/ IEC CONN 230V UK
REF 0047251000 CORD PWR W/ IEC CONN 230V
REF 0053997000 CORD PWR W/ IEC CONN 100V JPN
REF 0056389000 SRV DIA CMB CYDLX MAIN PCB
REF 0056392000 SRV DIA CMB CYDLX FP/RP/PA PCB
REF 0056393000 MANUAL OWNERS CYBER-DELUXE
REF 0057371000 PRESET LIST CYBER-DELUXE