Fender Mustang LT25 User manual

QUICK START GUIDE

TAP BUTTON:
Sets tempo on delay effects
(press and hold for TUNER)
BACK BUTTON:
Returns to previous screen
SAVE BUTTON:
Saves preset changes
MENU BUTTON:
Accesses additional options
AUX
SAVE
BACK
MENU
TAP
ENCODER
TURN to navigate
PUSH to edit
UTILITY
BUTTONS
PRESS to access
additional features
INPUT GAIN MASTER USBBASSTREBLEVOLUME
FTSW
DISPLAY
TOP CONTROL PANELTOP CONTROL PANEL

4.0
5.7
6.0
6.0
VOLUME
GAIN
TREBLE
BASS
TWIN CLEAN
5.5MIDDLE
01
FENDER
CLEAN
01 FENDER C...
AMPLIFIER
STOMP
DELAY
MOD
REV
TWIN CLEAN
PRESET TITLE
SCREEN
Shows when scrolling through
presets on the top level
PRESET EDITING
SCREEN
Shows when selecting the contents
of a preset to be edited
PARAMETER
SCREEN
Shows when editing the
contents of a preset
A preset is a custom grouping of an amplifier (including specific control settings) and optional effects (including effect types and specific control
settings for those effects). The Mustang LT25 comes with 50 custom presets (30 pre-loaded with 20 additional presets easily accessible), in
which the amplifier type can be changed and effects from the four basic effects categories can be added, modified, or removed. There are
three basic screens that allow the user to navigate through each preset. Advance to the next screen by pressing the ENCODER.
PRESS
ENCODER PRESS ENCODER
USING A PRESETUSING A PRESET

01
FENDER
CLEAN
01 FENDER C...
AMPLIFIER
STOMP
DELAY
MOD
REV
TWIN CLEAN
ROTATE PRESS
Turn the ENCODER to scroll through presets when the
PRESET TITLE SCREEN is shown on the DISPLAY.
Press the ENCODER to access the preset contents. The
PRESET EDITING SCREEN will appear on the DISPLAY.
ACCESSING A PRESETACCESSING A PRESET

4.0
5.7
6.0
6.0
VOLUME
GAIN
TREBLE
BASS
TWIN CLEAN
5.5MIDDLE
01 FENDER C...
AMPLIFIER
STOMP
DELAY
MOD
REV
TWIN CLEAN
PRESS ROTATE
Select the AMPLIFIER option in the PRESET EDITING
SCREEN and press the ENCODER to access the amplifier
options menu.
The amplifier type is the first item listed in the PARAMETER
SCREEN. Press and turn the ENCODER to change the
amplifier type.
CHANGING THE AMP TYPECHANGING THE AMP TYPE

4.0
5.7
6.0
6.0
VOLUME
GAIN
TREBLE
BASS
5.5MIDDLE
TWIN CLEAN
NOTE: The MASTER is not stored by the preset.
ROTATE
Select the control to be edited and press the ENCODER to
begin changing the value for that control. Turn the
ENCODER to change to the desired value. Press the
ENCODER again to exit the editing mode of that control.
Use the physical knobs on the control panel to edit the
parameters for the amplifier ONLY. These physical controls
will not modify the parameters of the effects options.
OR
GAIN BASSTREBLEVOLUME
EDITING AMP CONTROLSEDITING AMP CONTROLS

01 FENDER C...
AMPLIFIER
STOMP
DELAY
MOD
REV
TWIN CLEAN
NONE
PRESS ROTATE
In the PRESET EDITING SCREEN, solid lines indicate
active effects, and dashed lines indicate empty effects
categories. To add an effect, turn the ENCODER to highlight
the desired effect category and press to enter the effect.
The effect type will read NONE if no effect is present. Turn
the ENCODER to select and add a new effect. To remove an
effect, select and press the effect type at the top of the
DISPLAY and turn the ENCODER until the field reads NONE.
ADD / REMOVE EFFECTADD / REMOVE EFFECT

01 FENDER C...
AMPLIFIER
STOMP
DELAY
MOD
REV
TWIN CLEAN
5.5
4.5
10.0
DECAY
LEVEL
TONE
SPRING 65
PRESS ROTATE
Select the desired effect category in the PRESET EDITING
SCREEN and press the ENCODER to access the
parameters of that effect.
The effect type is the first item listed in the PARAMETER
SCREEN. Press and turn the ENCODER to change the
effect type.
CHANGING AN EFFECT TYPECHANGING AN EFFECT TYPE

TUNER
A
6.2
512.0ms
4.1
TIME
LEVEL
FEEDBACK
3.7TONE
DELAY
The TAP LED blinks with the tempo of the delay time
parameter. To set a new tap tempo; either scroll to the time
parameter and use the ENCODER to change the value, or
press the TAP BUTTON at the desired tempo (at least twice).
Press and hold the TAP BUTTON for quick-access of the
built-in TUNER.
USING THE TAP BUTTONUSING THE TAP BUTTON

01
FENDER
CLEAN
SAVE
REPLACE
SAVE AS
F E N D E R _ _
L E A N _ _ _
C
SAVE
CLEAR ALL
SAVE AS
NOTE: If a preset is not saved, it will revert to its previous settings when returning to it after
leaving the preset, or when turning the amplifier off and back on again.
Press the SAVE BUTTON and choose SAVE to save the
preset in its current position.
Choose SAVE AS to select a new preset position, overwrite
any existing preset position, or enter a new name for the
current preset. Choosing REPLACE allows you to load one
of 50 factory presets into the current preset position.
OR
SAVING A PRESETSAVING A PRESET