Feniex AI-0817 User manual

FENIEX // 2018 // INSTRUCTION MANUAL
WEB // www.feniexindustries.com
Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in the United States and other countries
preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make
derivative works of the copyrighted material. Accordingly, any copyrighted material of Feniex and its licensors contained herein or in the Feniex products described in this Price
List may not be copied, reproduced, distributed, merged or modied, transmitted, transcribed, stored in retrieval system or translated into any language or computer language,
in any form or by any means, without prior written permission of Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S. Patent & Trademark Oce.
Is this the latest version?
SCAN HERE
AI-0817, AI-1417, AI-2017, AI-2717, AI-3317, AI-4017, AI-4617, & AI-5217
INSTRUCTION MANUAL
TM

Safety Regulations & Warranty 3
Service after Expiration 3
Copyright 3
Feniex Product Copyright 3
Box Contents 4
Add-On Accessories 4
Specications, Tones, & Wiring 5
System Specications 5
Power Specications 5
Equipment Dimensions 5
Wiring Diagram 5
Wiring Instructions 5
Controller Functions 6
Mounting Instructions 7
Software Conguration 8
TABLE OF CONTENTS
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
2
TM

SAFETY REGULATIONS
The following provides all the information necessary to
safely operate the previously listed products of Feniex
Industries, Inc. Please read this manual thoroughly before
installing or operating your new product in order to
prevent any damage or injury. Failure to follow the listed
instructions in this manual may result in damage to your
products or personal injury.
• Proper installation of this product requires good
knowledge of automotive systems, electronics &
procedures.
• Please guarantee all vital components of the vehicle
are not in danger of being damaged by drilling holes
necessary for installation. Check all sides of the
mounting surface before drilling any holes into the
vehicle.
• Do not install this product in any way that interferes
with the deployment of the air bag. Doing so may
damage the eectiveness of the air bag & can lead to
serious personal and vehicle injury. The installer will
assume full responsibility of proper installation of the
new unit.
• Please clean the mounting surface before installation
of the unit when using tape, brackets, magnet, Velcro or
suction cups.
• The product’s ground wire must be connected directly
to the negative (-) battery post for eective use of the
unit. Please follow all wiring guidelines provided to
guarantee long lifespan & productivity. Failing to follow
these instructions may result in damage to the product.
WARRANTY
Feniex Industries, Inc. warrants to the original purchaser
that the product shall be free from defects in material &
workmanship for 5 years from the date of purchase for
all LED products. Feniex Industries warranties speakers,
sirens, ashers, & controllers for 2 years.
If warranty service is needed, please contact customer
support:
Phone: [phone]
Web Site: www.Feniex.com/support
Email: [e-mail]
If the product needs to be returned for repair or
replacement, contact our customer service team (using
any method listed above) to receive a Return Merchandise
Authorization (RMA) number. Operational times are from 9
a.m. to 6 p.m. central time, Monday through Friday.
CONDITIONS
Feniex Industries, Inc. will not be held responsible for any
costs associated with equipment removal and/or
re-installation resulting from a warranty claim. It is the sole
responsibility of the party initiating a warranty claim to pay
shipping charges associated with returning a product to
Feniex Industries for repair or replacement.
SERVICE AFTER EXPIRATION
Feniex Industries will still provide service for all products
after expiration of the warranty. For any issues, call the
customer support line. In some instances it may be
necessary for the product to be shipped, freight prepaid
and insured for loss or damage to Feniex headquarters.
SAFETY REGULATIONS & WARRANTY
Utilizing non-factory screws and mounting brackets may result
in the loss of warranty coverage.
COPYRIGHT
This instruction manual and the Feniex products
described in this instruction manual may include or
describe copyrighted Feniex material. Laws in the United
States and other countries preserve for Feniex Industries
and its licensors certain exclusive rights for copyrighted
material, including the exclusive right to copy, reproduce
in any form, distribute and make derivative works of
the copyrighted material. Accordingly, any copyrighted
material of Feniex and its licensors contained herein or in
the Feniex products described in this instruction manual
may not be copied, reproduced, distributed, merged
or modied in any manner without the express written
permission of Feniex Industries, Inc.
FENIEX PRODUCT COPYRIGHTS
The products described in this document are the property
of Feniex Industries, Inc. It is furnished by express license
agreement only and may be used only in accordance with the
terms of such an agreement. Products and documentation
are copyrighted materials. Making unauthorized copies is
prohibited by law. No part of the product or documentation
may be reproduced, transmitted, transcribed, stored in
retrieval system or translated into any language or computer
language, in any form or by any means, without prior
permission from Feniex Industries, Inc.
Please do not send in product without contacting support rst
for a Return Merchandise Authorization (RMA) number.
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
3
TM

SYSTEM SPECIFICATIONS
Input Power 11.5 - 15 VDC
Current Draw See Table Below
Modes Autonomous, AI, Custom, Dim, Focus, & Presets
Software Windows & Mac
AI Bar Mounts L-Brackets & Vehicle Specific Brackets
Controller Mount Swivel Mount
POWER SPECIFICATIONS
8" AI-0817 6,500 Lumens 125mA Standy 6 Amps*
14" AI-1417 12,500 Lumens 145mA Standy 11 Amps*
20" AI-2017 19,000 Lumens 160mA Standby 16 Amps*
27" AI-2717 25,000 Lumens 180mA Standby 21 Amps*
33" AI-3317 31,000 Lumens 195mA Standby 26 Amps*
40" AI-4017 37,500 Lumens 215mA Standby 31 Amps*
46" AI-4617 44,000 Lumens 230mA Standby 36 Amps*
52" AI-5217 50,000 Lumens 250mA Standby 41 Amps*
* Fuse all curcuits at 125% of total load
SPECIFICATIONS, DIMENSIONS, & BOX CONTENTS
3.53"
5.37"
4.30"
DIMENSIONS
LENGTHS
8" AI-0817
7.80"
33" AI-3317
32.84"
14" AI-1417
14.06"
40" AI-4017
39.10"
20" AI-2017
20.32"
46" AI-4617
45.36"
27" AI-2717 26.58"
52" AI-5217
51.62"
BOX CONTENTS QUANTITY
1) AI Light Bar 1
2) AI Controller 1
3) Brackets 2
4) Swivel Mount 5
5) USB Cable 1
6) RJ45 Cable 1
7) Antenna 1
8) Nuts 2
ADD-ON ACCESSORIES* QUANTITY
RJ45 Hub (AIK-502811) 1
*Sold Separately
USB Cable
RJ45 Hub
Sold with quantities of 2
or more AI Lightbars
AI Light Bar
Swivel Mount
L-Brackets
AI Controller
RJ45 Cable
GPS Antenna
3/8 16th" Nut
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
4
TM

WIRING INSTRUCTIONS & CONTROLLER FUNCTIONS
COLOR FUNCTION CONNECTION
Black Ground / 12v (-) Chasis Ground
Red Battery / 12v (+) Positive Battery Terminal
Gray Control / RJ45 AI Controller
WIRING INSTRUCTIONS
1) Connect the AI Controller to the AI Lightbar using the
RJ45 cable.
2) Mount the Antenna on the roof of the vehicle and
connect it to the controller.
3) Connect the lightbar to the battery, attaching the red
12V+ wire to the positive terminal of the vehicle's battery.
Ground the black wire or connect it to the 12V- terminal of
the vehicle's battery.
4) Press the power button twice to turn on the controller
and lightbar.
Vehicle's Battery
FUSE*
GPS Antenna
WIRING DIAGRAM CONTROLLER FUNCTIONS
Autonomous Mode: Press the button to cycle to
Autonomous Mode (indicated by green). Download the AI
Software (feniex.com) to select from 2 dierent options:
AI Mode: Monitors the speed of the vehicle and
adjusts the light spread accordingly, without the
user's control.
Custom Mode: Select your preferred turn
sensitivity and speed for light spread adjustments.
The LED ring will brighten as the speed increases,
thereby narrowing the light spread.
Dim Mode: Press the button to cycle to Dim Mode
(indicated by blue). Rotate the dial to adjust the brightness.
When the led screen is completely dim, no lights will be
on. When the led screen is completely lit, the bar will be at
100% brightness.
Focus Mode: Press the button to cycle to Focus
Mode (indicated by red). Rotate the dial to adjust the
focus on the lights. When the LED screen is completely
dim, the lights will be in full spread. When the LED screen
is completely lit, the lights will be in full spot.
Memory Presets: Memory presets are the default settings
if the controller is disconnected from the lightbar. To set:
1) Set the focus (Focus Mode)
2) Set the brightness (Dim Mode)
3) Press and hold the brightness button
The AI Series is extremely bright and can be dangerous to your
vision. Wear protective glasses while looking at the product.
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
5
TM

MOUNTING
CHEVROLET FROM YEAR TO YEAR PART #
2500 & 3500 HD 2007 2013 AIB-010
2500 & 3500 HD 2014 2018 AIB-006
Avalanche 2006 2013 AIB-010
Colorado 2015 2018 AIB-005
Silverado 2007 2013 AIB-010
Silverado 2014 2018 AIB-006
Tahoe & Suburban 2007 2014 AIB-010
Tahoe & Suburban 2015 2018 AIB-006
DODGE FROM YEAR TO YEAR PART #
RAM 1500, 2500, & 3500 2009 2018 AIB-012
FORD FROM YEAR TO YEAR PART #
F-150 2009 2018 AIB-004
F-150 Raptor 2010 2018 AIB-004
F-250 & F-350 2015 2018 AIB-004
F-450 2009 2014 AIB-004
F-450 2015 2017 AIB-004
GMC FROM YEAR TO YEAR PART #
2500 & 3500 HD 2007 2013 AIB-010
2500 & 3500 HD 2014 2018 AIB-006
Canyon 2015 2018 AIB-005
Sierra 2007 2013 AIB-010
Sierra 2014 2018 AIB-006
Yukon & Yukon XL 2007 2014 AIB-010
Yukon & Yukon XL 2015 2018 AIB-006
JEEP FROM YEAR TO YEAR PART #
JK Roof 2007 2018 AIB-001
JK Hood 20" 2007 2018 AIB-008
JK Hood 27" 2007 2018 AIB-009
TOYOTA FROM YEAR TO YEAR PART #
Tacoma Roof 2004 2015 AIB-003
Tacoma 2016 2018 AIB-002
Tundra 2007 2018 AIB-011
4Runner 2010 2018 AIB-002
1) Use the provided hardware to attach the left and right
bracket on either end of the lightbar (recommended
torque setting of 25ft/lbs).
2) Once secured, place the lightbar on the intended
mounting surface. Mark the hole placement of the bracket.
3) Drill the 2 holes marked in step 2 for the brackets.
4) Secure the lightbar and brackets to the mounting
surface.
5) Route the wires away from any sharp edges and follow
the wiring diagram on the following page.
UNIVERSAL MOUNTING INSTRUCTIONSVEHICLE SPECIFIC MOUNTS
Attach the lightbar to a secure area of the vehicle that can
support the weight . Do not drill into any parts that may have
wiring or might tamper with the functionality of the vehicle.
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
6
TM

SOFTWARE
SOFTWARE CONFIGURATION
1) Download: Download and install the AI software from
feniex.com
2) Connect: Using the provided USB cable, connect the AI
Controller to your computer.
3) Launch: Launch the AI Software.
4) Initialize: Click run set up.
5) Speed: Select Custom or AI.
AI mode changes the light spread based on your driving
characteristics. Custom mode allows the user to manually
input values for turn sensitivity and speed.
6) Turn: Turn Detection controls the lightbar's Turn Angle
and Sensitivity. Turn Angle changes the light spread based
on the sharpness of the turn. Sensitivity controls how the
light spread will change over the duration of the turn.
7) Review: Check your nal settings of the lightbar. Click
continue to program the bar or previous to change your
settings.
8) Program: Programming Successful indicates your bar
has been programed and is ready to use.
SOFTWARE DOWNLOADS
Windows MacOS
FENIEX // 2018 // INSTRUCTION MANUAL // v2.0
WEB // www.feniexindustries.com
7
TM