Feniex STORM PRO C-4014 User manual
TM FENIEX. 2014 INSTRUCTION MANUAL
WEB. www.feniex.com
Storm Pro - Instruction Manual
Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in the United
States and other countries preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the exclusive
right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of
Feniex and its licensors contained herein or in the Feniex products described in this Price List may not be copied, reproduced, distributed, merged
or modifi ed,transmitted, transcribed, stored in retrieval system or translated into any language or computer language, in any form or by any means,
without prior written permission of Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S. Patent & Trademark Offi ce.
This instruction manual serves as a
guide for the Feniex Storm Pro.
IMPORTANT! Please read through all
provided instructions and any listed
warnings in regards to product use.
Model # - C-4014, C-4015
V1.0
STORM PRO
V1.0
TM
FENIEX. 2014 INSTRUCTION MANUAL
WEB. www.feniex.com
2
Storm Pro - Instruction Manual
Table of Contents
Safety Regulations 3
Warranty 3
Service after Expiration 3
Copyright 3
Feniex Product Copyright 3
Content Diagram
100W 4
200W 5
Mounting Instructions
100W 6
200W 7
Wiring Instructions 8
Wiring Diagram
100W 9 - 10
200W 11
Cycling the Patterns: 200W 12
Adjusting the Power Input: 100W 13
V1.0
Operational times are from 10 a.m. to 5 p.m.
central time, Monday through Friday. Please
do not send in product without contacting
support rst for a RMA number.
Service After Expiration
Feniex Industries will still provide service for
all products after expiration of the warranty.
For any issues, call the customer support
line. In some instances it may be necessary
for the product to be shipped, freight prepaid
and insured for loss or damage to Feniex
headquarters.
Copyright
This instruction manual and the Feniex
products described in this instruction
manual may include or describe copyrighted
Feniex material. Laws in the United States
and other countries preserve for Feniex
Industries and its licensors certain exclusive
rights for copyrighted material, including the
exclusive right to copy, reproduce in any
form, distribute and make derivative works
of the copyrighted material. Accordingly,
any copyrighted material of Feniex and its
licensors contained herein or in the Feniex
products described in this instruction manual
may not be copied, reproduced, distributed,
merged or modied in any manner without
the express written permission of Feniex
Industries, Inc.
Feniex Product Copyrights
The products described in this document are
the property of Feniex Industries, Inc. It is
furnished by express license agreement only
and may be used only in accordance with the
terms of such an agreement. Products and
documentation are copyrighted materials.
Making unauthorized copies is prohibited by
law. No part of the product or documentation
may be reproduced, transmitted, transcribed,
stored in retrieval system or translated into any
language or computer language, in any form
or by any means, without prior permission from
Feniex Industries, Inc.
Safety Regulations
The following provides all the information
necessary to safely operate the previously
listed products of Feniex Industries, Inc.
Please read this manual thoroughly before
installing or operating your new product
in order to prevent any damage or injury.
Failure to follow the listed instructions in
the manual may result in damage to your
products or personal injury.
• Proper installation of this product requires
good knowledge of automotive systems,
electronics and procedures.
• Please guarantee all vital components
of the vehicle are not in danger of being
damaged by drilling holes necessary
for installation. Check all sides of the
mounting surface before drilling any holes
into the vehicle.
• Do not install this product in any way
that interferes with the deployment of
the air bag. Doing so may damage the
effectiveness of the air bag and can lead
to serious personal and vehicle injury.
The installer will assume full responsibility
of proper installation of the new unit.
• Please clean the mounting surface before
installation of the unit when using tape,
brackets, magnet, Velcro or suction cups.
• The product ground wire must be
connected directly to the Negative (-)
battery post for effective use of the
unit. Please follow all wiring guidelines
provided to guarantee long lifespan
and productivity. Failing to follow these
instructions may result in damage to the
product.
Warranty
Feniex Industries, Inc. warrants to the original
purchaser that the product shall be free from
defects in material and workmanship for sixty
(60) months from the date of purchase for all
LED products. Feniex Industries warranties
speakers, sirens and controllers for 24
months; switches and ashers for 12 months.
If a warranty problem occurs, please contact
customer support at 1.800.615.8350 or
visit the web site at www.Feniex.com. If the
product needs to be returned for repair or
replacement, call our customer support line
to receive a return merchandise authorization
number.
Warning! Utilizing non-factory screws and mounting
brackets may result in loss of warranty coverage.
TM
Storm Pro - Instruction Manual
FENIEX. 2014 INSTRUCTION MANUAL
WEB. www.feniex.com 3
Safety Regulations & Warranty
V1.0
TM
FENIEX. 2014 INSTRUCTION MANUAL
WEB. www.feniex.com
4
Storm Pro - Instruction Manual
Content Diagram: 100W
1Storm Pro 100W Siren System Specication:
Input Voltage: 12V DC
Temperature Range: -20°C to +50°C
Max Current: 8.5A
Stand By Current: Less than 30mA
Power Output: 100W
Main Fuse: 20A
Feature 1: Horn Ring
Feature 2: Park Kill
Feature 3: Radio Rebroadcast
Wail: 725 to 1500 Hz (12 cycles/min.)
Yelp: 725 to 1600 Hz (180 cycles/min.)
Fast Yelp: 725 to 1600 Hz (360 cycles/min.)
Phaser: 650 to 1725 Hz (800 cycles/min.)
Hi-Lo: 550 to 750 Hz (30 cycles/min.)
Manual Wail: 725 to 1500 Hz
Horn: Composite
Speaker Impedance: 11 Ohm
Output Voltage: 35V RMS
Audio Bandwith: 300 to 10,000 Hz at 25 Watts
Audio Distortion: 1% at 25 Watts
Housing: Aluminum
Speaker Overload Protection Turn off for 5 seconds then Auto Restart
2Storm Pro Microphone System Specification:
Cable Length: 15 feet
Housing: Reinforced PC
1
2
V1.0
TM
FENIEX. 2014 INSTRUCTION MANUAL
WEB. www.feniex.com
5
Storm Pro - Instruction Manual
1
2
1Storm Pro 200W Siren System Specication:
Input Voltage: 12V DC
Temperature Range: -20°C to +50°C
Max Current: 16A
Stand By Current: Less than 30mA
Power Output: 100W per Speaker, 200W Total
Main Fuse: 20A
Feature 1: Horn Ring
Feature 2: Park Kill
Feature 3: Radio Rebroadcast
Feature 4: Dual Tone Capable
Feature 5: Dual Tone Delay Start
Feature 6: 10+ Programmable Tones
Wail: 725 to 1500 Hz (12 cycles/min.)
Yelp: 725 to 1600 Hz (180 cycles/min.)
Fast Yelp: 725 to 1600 Hz (360 cycles/min.)
Phaser: 650 to 1725 Hz (800 cycles/min.)
Hi-Lo: 550 to 750 Hz (30 cycles/min.)
Manual Wail: 725 to 1500 Hz
Horn: Composite
Speaker Impedance: 11 Ohm
Output Voltage: 35V RMS
Audio Bandwith: 300 to 10,000 Hz at 25 Watts
Audio Distortion: 1% at 25 Watts
Housing: Aluminum
Speaker Overload Protection Turn off for 5 seconds then Auto Restart
2Storm Pro Microphone System Specification:
Cable Length: 15 feet
Housing: Reinforced PC
Content Diagram: 200W
V1.0
TM
FENIEX. 2014 INSTRUCTION MANUAL
WEB. www.feniex.com
6
Storm Pro - Instruction Manual
Mounting Instructions:
1.) Place the unit against the intended mounting surface.
2.) Mark the areas where the mounting holes will be drilled. If the mounting surface is part
of the vehicle, make sure no vital components could be damaged by the drilling process.
3.) Drill four, 4 mm mounting holes on the
mounting surface, making sure no vital
components of the surface are damaged.
4.) Make sure to de-burr the holes
thoroughly.
2.5078”
4.0945”
1.9685”
6.9675”
7.4006”
5.) Using customer provided screws,
secure the Storm Siren Pro to the mounting
surface.
Mounting Instructions: 100W
V1.0
TM
FENIEX. 2014 INSTRUCTION MANUAL
WEB. www.feniex.com
7
Storm Pro - Instruction Manual
Mounting instructions: 200W
1.9685”
6.9675”
7.4006”
Mounting Instructions:
1.) Place the unit against the intended mounting surface.
2.) Mark the areas where the mounting holes will be drilled. If the mounting surface is part
of the vehicle, make sure no vital components could be damaged by the drilling process.
3.) Drill four, 4 mm
mounting holes
on the mounting
surface, making
sure no vital
components of
the surface are
damaged.
4.) Make sure to
de-burr the holes
thoroughly.
5.) Using customer
provided screws,
secure the Storm
Siren Pro to the
mounting surface.
2.5078”
6.6563”
V1.0
TM
FENIEX. 2014 INSTRUCTION MANUAL
WEB. www.feniex.com
8
Storm Pro - Instruction Manual
Wiring INSTRUCTIONS
> 1ft.
Powering the Storm Pro Siren
Step 1: Secure a user-provided red wire
to the positive output with a screwdriver.
Follow the same process with a black wire
into the negative output.
Step 2: To activate the unit, extend the
red, 12V (+) wire to the 12V (-) post of the
vehicle’s battery. Extend the black, 12V
(-) wire to the ground post of the vehicle’s
battery or chasis.
Important! Install a 20 amp fuse (user
supplied) to the end of the red, 12V(+) wire.
Do not use a circuit breaker or fusible link.
Do not insert the fuse until the opposite
end of the fuse holder is connected to the
vehicle battery. Install the fuse less than 1’
to the battery.
Important! Do not wire this unit to an
alternative power supply, such as a AC to
DC converters. Wire only as instructed.
The red, 12V (+) wire should only to the
vehicle’s battery or to a 12V (+) switch post.
Failure to do so may damage the unit and
void warranty.
Outputs:
Positive (+)
Negative (-)
20amp
fuse
+ -
battery
Wiring the Storm Pro Siren
Step 1: Place user-provided wire in the
desired terminal block input.
Step 2: Secure wire with a screwdriver.
1
2
V1.0
TM
FENIEX. 2014 INSTRUCTION MANUAL
WEB. www.feniex.com
9
Storm Pro - Instruction Manual
radio radio
speaker
STorm 100W: wiring DIAGRAM
- +
battery
- +
battery
100W 11ohm
Speaker
Activating the Siren
Tones:
1. Extend the red,
12V (+) wire to the (+)
post of the vehicle’s
battery. Extend the
black, 12V (-) wire to
ground.
2. Connect the Horn,
Phaser, Yelp, and/or
Wail outputs to the
red, 12v (+) wire to
activate function.
3. Connect both
100W speaker
outputs to a 100W,
11Ohm speaker (user
provided).
Activating Radio
Rebroadcast:
1. Extend the red,
12V (+) wire to the (+)
post of the vehicle’s
battery. Extend the
black, 12V (-) wire to
ground.
2. Connect the
Broadcast On input to
the red, 12V(+) wire
to activate.
3. Connect both
Radio In outputs to
the radio and speaker
wires.
Connect here
Connect here
V1.0
Activate Siren Tones (see page 9 to change default siren tone):
Positive 12V (+) Power
Negative 12V (-) Ground
Horn Ring
Park Kill
Horn
Phaser / Manual Wail
Yelp / Yelp 2
Wail / Hi-Lo
Radio In
Radio In
Broadcast On
100W Speaker
100W Speaker
Install Radio Rebroadcast:
Positive 12V (+) Power
Negative 12V (-) Ground
Horn Ring
Park Kill
Horn
Phaser / Manual Wail
Yelp / Yelp 2
Wail / Hi-Lo
Radio In
Radio In
Broadcast On
100W Speaker
100W Speaker
TM
FENIEX. 2014 INSTRUCTION MANUAL
WEB. www.feniex.com
10
Storm Pro - Instruction Manual
Storm 100W: Wiring INSTRUCTIONS
Activating Horn
Ring:
1. Extend the red,
12V (+) wire to the (+)
post of the vehicle’s
battery. Extend the
black, 12V (-) wire to
ground.
2. Connect the Horn
Ring input to the
output of the vehicle
relay box. Depending
on the device, this
could be the positive,
the negative, or the
control wire (see
page 9 for adjusting
the power input).
Activating Park Kill
Mode:
1. Extend the red,
12V (+) wire to the (+)
post of the vehicle’s
battery. Extend the
black, 12V (-) wire to
ground.
2. Connect the Park
Kill input to the
vehicle’s transmission
park neutral safety
switch by determining
which wire is the
enable wire for the
device to be switched
on.
Depending on the
device, this could
be the positive or
negative (see page
9 fore adjusting the
power input).
vehicle horn
relay box
vehicle
horn
- +
battery
vehicle
transmission
park neutral
safety switch
- +
battery
Connect here
V1.0
Activate Park Kill:
Positive 12V (+) Power
Negative 12V (-) Ground
Horn Ring
Park Kill
Horn
Phaser / Manual Wail
Yelp / Yelp 2
Wail / Hi-Lo
Radio In
Radio In
Broadcast On
100W Speaker
100W Speaker
Activate Horn Ring:
Positive 12V (+) Power
Negative 12V (-) Ground
Horn Ring
Park Kill
Horn
Phaser / Manual Wail
Yelp / Yelp 2
Wail / Hi-Lo
Radio In
Radio In
Broadcast On
100W Speaker
100W Speaker
TM
FENIEX. 2014 INSTRUCTION MANUAL
WEB. www.feniex.com
11
Storm Pro - Instruction Manual
200W wiring DIAGRAM
radio radio
speaker
Activating the Siren
Tones:
1. Extend the red, 12V (+)
wire to the (+) post of the
vehicle’s battery. Extend
the black, 12V (-) wire to
ground.
2. Connect the Horn,
Phaser, Yelp, and/or Wail
outputs to the red, 12V (+)
wire to activate function.
3. Connect both 100W
speaker outputs to a 100W,
11Ohm speaker (user
provided).
Activating Radio
Rebroadcast:
1. Extend the red, 12V (+)
wire to the (+) post of the
vehicle’s battery. Extend
the black, 12V (-) wire to
ground.
2. Connect the Broadcast
On input to the red, 12V(+)
wire to activate.
3. Connect both Radio In
outputs to the radio and
speaker wires.
V1.0
- +
battery
100W 11ohm
Speaker
Positive 12V (+) Power
Negative 12V (-) Ground
Speaker 1 T1
Speaker 1 T2
Speaker 1 T3
Speaker 1 T4
Speaker 1 T5
Speaker 2 T1
Speaker 2 T2
Speaker 2 T3
Speaker 2 T4
Speaker 2 T5
Dual Tone Delay
Horn Ring
Horn Ring
Park Kill
Park Kill
Broadcast On
Radio In
Radio In
100W Speaker
100W Speaker
100W Speaker
100W Speaker
100W 11ohm
Speaker
TM
FENIEX. 2014 INSTRUCTION MANUAL
WEB. www.feniex.com
12
Storm Pro - Instruction Manual
Storm 200W: Cycling patterns
V1.0
1
1. Switching Tones
Step 1: Activate the desired port by
connecting 12V(+) to the terminal block.
Step 2: Momentarily press the tack switch
to cycle through 10 different emergency
tones.
TM
FENIEX. 2014 INSTRUCTION MANUAL
WEB. www.feniex.com
13
Storm Pro - Instruction Manual
Horn Ring
changed
to negative
activation
2.
+ -
HR
PK
1.
+ -
HR
PK
1. Horn Ring and Park Kill
1. The factory default shows both jumper
inputs (Horn Ring and Park Kill) set to
positive activation.
2. To set the input power to the negative
activation, move one or both jumper
positions over to the right as shown.
Storm 100W: adjusting the power input
1
V1.0
Default tones
changed by
removing jumpers
Hi-Lo
Yelp 2
Maual Wail
Factory Default
Wail
Yelp
Phaser
2. Siren Tones
As shown, the factory default tones are
Wail, Yelp, and Phaser with the jumper
preconnected on each port.
To change any of the tones on each port,
remove the jumper for the tone you wish to
change to:
Default Tone: Secondary Tone:
Wail Hi-Lo
Yelp Yelp 2
Phaser Manual Wail
2
This manual suits for next models
1
Table of contents
