Fiat Blue&Me 2012 500 Abarth User manual

1/ FIAT 500 SPECIFICATIONS http://media.chrysler.com
500 • Specifications
New 2012 FIAT 500
SPECIFICATIONS
Dimensions are in inches (millimeters) unless otherwise noted.
GENERAL INFORMATION
Body Style
A-segment hatchback
EPA Vehicle Class
Subcompact
Assembly Plant
Toluca, Mexico
Introduction Date
March 2011 as a 2012 model
ENGINE: 1.4-LITER SOHC 16-VALVE MULTIAIR®INLINE FOUR-CYLINDER
Availability
Standard — Fiat 500 Pop, Sport and Lounge
Type and Description
Inline four-cylinder, liquid-cooled
Displacement
83.48 cu. in. (1368 cu. cm)
Bore x Stroke
2.83 x 3.31 in. (72.0 x 84.0 mm)
Valve System
Belt-driven, MultiAir®, SOHC,16 valves, hydraulic end-pivot roller
rockers
Fuel Injection
Sequential, multi-port, electronic, returnless
Construction
Cast iron block with aluminum-alloy heads and aluminum-alloy
bedplate
Compression Ratio
10.8:1
Power (SAE net)
101 bhp (75 kW) @ 6,500 rpm (73.8 bhp/L)
Torque (SAE net)
98 lb.-ft. (133 N•m) @ 4,000 rpm
Max. Engine Speed
6,900 rpm (electronically limited)
Fuel Requirement
87 octane (R+M)/2 acceptable
91 octane recommended
Oil Capacity
4.0 qt. (3.8L) with dry filter
Coolant Capacity
4.6 qt. (14.4L)
Emission Controls
Dual three-way catalytic converters, heated oxygen sensors
and internal engine features(a)
Max. Gross Trailer Weight
Not rated for trailer tow
Estimated EPA Fuel Economy mpg (City/Hwy)
30/38 (5-speed manual)
27/34 (6-speed automatic)
Engine Assembly Plant
GEMA Engine Plant, Dundee, Mich.
(a) Meets Federal Tier 2 Bin 5 emission requirements and ULEV II requirements in California, Massachusetts, New York, Maine, Vermont,
Connecticut, Pennsylvania, Rhode Island, New Jersey, Oregon and Washington.

2/ FIAT 500 SPECIFICATIONS http://media.chrysler.com
500 • Specifications
TRANSMISSION: AISIN AUTOMATIC SIX-SPEED OVERDRIVE WITH AUTO STICK
Availability
Standard on 500 Lounge
Optional on 500 Pop and 500 Sport models
Description
Auto Stick driver-interactive manual control and electronically
modulated torque converter clutch
Gear Ratios
1st
4.044
2nd
2.371
3rd
1.556
4th
1.159
5th
0.852
6th
0.672
Reverse
3.193
Final Drive Ratio
4.103
Overall Top Gear
6.01
TRANSMISSION: C514 FIVE-SPEED MANUAL
Availability
Standard on 500 Pop and 500 Sport
Description
1st, 2nd gear: Double Cone 3rd, 4th, 5th, gear: Single Cone
Gear Ratios
1st
3.909
2nd
2.158
3rd
1.345
4th
0.974
5th
0.766
Reverse
3.818
Final-drive Ratio
3.733
ELECTRICAL SYSTEM
Alternator
105-amp — Standard all
Battery
500 CCA, maintenance free

3/ FIAT 500 SPECIFICATIONS http://media.chrysler.com
500 • Specifications
DIMENSIONS AND CAPACITIES(D)
Wheelbase
90.6 (2,300)
Track, Front
55.4 (1,406.8)
Track, Rear
55.0 (1,397.0)
Overall Length
139.6 (3,546.7)
Overall Width
64.1 (1,627.0)
Overall Height
59.8 (1,519.6)
Ground Clearance
4.1 (104.0)
Drag Coefficient (Cd)
0.35
Curb Weight, lb. (kg)
2,363 (1,074.0) — 5-MTX
2,434 (1,106.4) — 6-ATX
Weight Distribution, percent F/R
64/36 — 5-MTX
66/34 — 6-ATX
Fuel Tank Capacity, gal. (L)
10.5 (40)
(d) All dimensions measured at curb weight with standard tires.
ACCOMMODATIONS
Seating Capacity, F/R
2/2
Front Seat
Head room
38.9 (989.1)
37.6 (956.3) with sunroof
Legroom
40.7 (1,034.8)
Shoulder room
49.4 (1,254.8)
Hip room
47.9 (1,215.4)
Total seat travel
Driver — 8.2 (210.0)
Passenger — 8.2 (210.0)
EPA front row interior volume, cu. ft. (cu. m)
43.8 (1.239)
Rear Seat
Head room
35.6 (902.9)
Legroom
31.7 (805.1)
Knee clearance
3.8 (96.5)
Shoulder room
46.4 (1,177.5)
Hip room
1083.1 (42.6)
EPA second row interior volume, cu. ft. (cu. m)
30.2 (0.854)
Total Interior Volume, cu. ft. (cu. m)
85.1 (2.409)
EPA Luggage Compartment Volume, cu. ft. (cu. m)
9.5 (0.269)
EPA Interior Volume Index, cu. ft. (cu. m)
75.6 (2.140)
Trunk Liftover Height
27.7 (703.6)

4/ FIAT 500 SPECIFICATIONS http://media.chrysler.com
500 • Specifications
BODY
Layout
Transverse-mounted front engine, front-wheel drive
Construction
Unitized steel body
SUSPENSION
Front
MacPherson suspension, coil spring with twin-tube shock
absorbers and stabilizer bar — included with 500 Pop and 500
Lounge
Sport-tuned shock absorbers and springs — included with 500
Sport
Rear
Rear twist-beam axle with coil springs and twin-tube shock
absorbers — included with 500 Pop and 500 Lounge
Sport-tuned shock absorbers and springs — included with 500
Sport
STEERING
Type
Power rack and pinion with electric power steering (EPS) column
Overall Ratio
16.3:1
Turning Diameter (curb-to-curb)
30.6 ft. (9.32 m)
Steering Turns (lock-to-lock)
3.0
TIRES
Availability
Standard on 500 Pop and 500 Lounge
Size and type
185/55R15 BSW all-season
Mfr. and model
Continental ContiProContact or Firestone Firehawk GTH or Pirelli
Cinturato P7 A/S
Revs per mile (km)
906 (563)
Availability
Standard on 500 Sport
Size and type
195/45R16XL BSW all-season
Mfr. and model
Pirelli Cinturato P7 A/S or Continental ContiProContact
Revs per mile (km)
901 (560) or 911 (566)

5/ FIAT 500 SPECIFICATIONS http://media.chrysler.com
500 • Specifications
WHEELS
Availability
Standard on 500 Pop
Type and material
Steel wheels with tech silver painted wheel covers
Size
15 x 6.0
Availability
Optional on 500 Pop
Type and material
Cast-aluminum, five oval spoke design, fully painted tech silver
Size
15 x 6.0
Availability
Standard on 500 Lounge
Type and material
Cast-aluminum, nine split-spoke design, fully painted tech silver
Size
15 x 6.0
Availability
Optional on 500 Lounge
Type and material
Cast-aluminum premium finish, radial design, fully painted
premium silver
Size
15 x 6.0
Availability
Standard on 500 Sport
Type and material
Cast-aluminum, polished face with dark mineral gray painted
pockets
Size
16 x 6.5
BRAKES
Front
Rotor size and type
10.1 x 0.86 (257 x 22) vented
Caliper size and type
2.12 (54) single-piston with aluminum housing
Swept area
193 sq. in. (1,244 sq. cm)
Rear
Rotor size and type
9.4 x 0.4 (240 x 11) solid
Caliper size and type
1.33 (34) single-piston with aluminum housing
Swept area
153 sq. in. (984 sq. cm)
