Fieldmann FDU 200801-E User manual

FDU 200801-E

2
English ...................................................................................................................................................................................... 9
Čeština .................................................................................................................................................................................. 25
Slovenčina .......................................................................................................................................................................... 39
Magyarul ............................................................................................................................................................................. 55
Polski ...................................................................................................................................................................................... 71
Nederlands ........................................................................................................................................................................ 89
Italiano .................................................................................................................................................................................101
Hrvatski ............................................................................................................................................................................... 113
Français .............................................................................................................................................................................. 123
Español .............................................................................................................................................................................. 135
Deutsch .............................................................................................................................................................................. 147
4SQTLJ ............................................................................................................................................................................. 157
1
3
10 16

2
English ...................................................................................................................................................................................... 9
Čeština .................................................................................................................................................................................. 25
Slovenčina .......................................................................................................................................................................... 39
Magyarul ............................................................................................................................................................................. 55
Polski ...................................................................................................................................................................................... 71
Nederlands ........................................................................................................................................................................ 89
Italiano .................................................................................................................................................................................101
Hrvatski ............................................................................................................................................................................... 113
Français .............................................................................................................................................................................. 123
Español .............................................................................................................................................................................. 135
Deutsch .............................................................................................................................................................................. 147
4SQTLJ ............................................................................................................................................................................. 157
1
3
10 16

4




FDU 200801-E
5

 



"#$



4




FDU 200801-E
5

 



"#$



6




FDU 200801-E
7

6




FDU 200801-E
7

8
FDU 200801-E
EN
ASH VACUUM CLEANER OPERATING INSTRUCTIONS
9
Contents
Ash Vacuum Cleaner
OPERATING INSTRUCTIONS
Thank you for buying this ash vacuum cleaner. Before using it, please read
carefully this operating manual and retain it for further use.
CONTENTS
FIGURES ................................................................................................................................................. 3
1. GENERAL SAFETY REGULATIONS ............................................................................................ 10
2. EXPLANATION OF INSTRUCTION LABELS ON THE MACHINE ..................................... 15
3. MACHINE DESCRIPTION AND SCOPE OF DELIVERY ...................................................... 16
4. IMPORTANT SAFETY INSTRUCTIONS ....................................................................................... 17
5 SAFETY MEASURES ......................................................................................................................... 18
6. VACUUM CLEANER ASSEMBLY ................................................................................................ 18
7. OPERATING INSTRUCTIONSI ...................................................................................................... 19
8. MAINTENANCE AFTER USE .......................................................................................................... 19
9. FILTER CLEANING ............................................................................................................................ 19
10. TECHNICAL DATA ............................................................................................................................20
11. DISPOSAL ............................................................................................................................................ 21

8
FDU 200801-E
EN
ASH VACUUM CLEANER OPERATING INSTRUCTIONS
9
Contents
Ash Vacuum Cleaner
OPERATING INSTRUCTIONS
Thank you for buying this ash vacuum cleaner. Before using it, please read
carefully this operating manual and retain it for further use.
CONTENTS
FIGURES ................................................................................................................................................. 3
1. GENERAL SAFETY REGULATIONS ............................................................................................ 10
2. EXPLANATION OF INSTRUCTION LABELS ON THE MACHINE ..................................... 15
3. MACHINE DESCRIPTION AND SCOPE OF DELIVERY ...................................................... 16
4. IMPORTANT SAFETY INSTRUCTIONS ....................................................................................... 17
5 SAFETY MEASURES ......................................................................................................................... 18
6. VACUUM CLEANER ASSEMBLY ................................................................................................ 18
7. OPERATING INSTRUCTIONSI ...................................................................................................... 19
8. MAINTENANCE AFTER USE .......................................................................................................... 19
9. FILTER CLEANING ............................................................................................................................ 19
10. TECHNICAL DATA ............................................................................................................................20
11. DISPOSAL ............................................................................................................................................ 21

EN 10 General safety instructions
1. GENERAL SAFETY INSTRUCTIONS
Important safety warnings
Unpack the product carefully and be sure not to throw away any part of the package before
having found all components of the product.
Keep the product in a dry place out of reach of children.
Read all cautions and instructions. The failure to adhere to warning cautions and instructions
may result in an accident, fire and/or a serious injury.
Packaging
The product is placed in a package preventing damage during transport. This package is a raw
material therefore it can be handed-over for recycling.
Instructions for use
Before beginning to work with the machine, read the following safety rules and instructions for
use. Familiarize with operating elements and the proper use of the device. Keep the manual in a
safe place for future reference. We recommend keeping the original package including the inner
packaging materials, cash voucher and guarantee card for a period of warranty at minimum.
For a case of transportation, pack the machine into the original box from the manufacturer,
thus ensuring a maximum protection of the product during a possible transport (e.g. moving or
sending into a service station).
Note: If you hand the machine over to next persons, hand it over together with the manual.
Adherence to the attached instructions for use is a precondition for the proper use of the
machine. The operation manual includes also instructions for operation, maintenance and
repairs.
The manufacturer does not take any responsibility for accidents or damages
resulting from the failure to adhere to this manual.
FDU 200801-E
EN
ASH VACUUM CLEANER OPERATING INSTRUCTIONS
11
General safety instructions
Carefully read, remember and keep these safety instructions
WARNING! In the use of electric machines and power tools, it is necessary to respect
and follow the following safety instructions for the reasons of protection against electric
shock, personal injury and danger of fire. The term “power tool” in the instructions below
refers both to mains-operated (corded) power tool or battery-operated (cordless) power tool.
Save all warnings and instructions for future reference.
Workplace
Keep the work area clean and well lit. Cluttered or dark areas in the workplace invite
accidents. Store power tools that you don’t currently use.
Do not operate power tools in environments with danger of occurrence of a fire or explosion,
such as in the presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep unauthorised persons, especially children, away from the work area while operating
a power tool! Distractions can cause you to lose control over the performed activity. In no
event leave your power tool unattended. Keep the equipment away from animals.
Electrical Safety
Power tool plugs must match the mains socket outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Undamaged plugs and
matching outlets will reduce risk of electric shock. Damaged or fouled supply cables increase
the risk of electric shock. If the power cord is damaged, it must be replaced by a new power
cord which is available at the authorised service centre or the importer.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, cooking
ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet conditions. Never touch the power tool with wet
hands. Never wash the power tool under running water or immerse it in water.
Never use the supply cable for other than intended purposes. Never use the cord for carrying
or pulling the power tool. Never unplug the plug from the outlet by pulling the cable. Keep
electric cables away from sharp or hot objects to prevent mechanical damage.
The power tool was designed to be powered solely by alternating electric current. Always
check if the electric voltage matches the information specified in the type label of the power
tool.
Never use power tool with damaged electric cable or plug or which has been dropped or is in
any way damaged.

EN 10 General safety instructions
1. GENERAL SAFETY INSTRUCTIONS
Important safety warnings
Unpack the product carefully and be sure not to throw away any part of the package before
having found all components of the product.
Keep the product in a dry place out of reach of children.
Read all cautions and instructions. The failure to adhere to warning cautions and instructions
may result in an accident, fire and/or a serious injury.
Packaging
The product is placed in a package preventing damage during transport. This package is a raw
material therefore it can be handed-over for recycling.
Instructions for use
Before beginning to work with the machine, read the following safety rules and instructions for
use. Familiarize with operating elements and the proper use of the device. Keep the manual in a
safe place for future reference. We recommend keeping the original package including the inner
packaging materials, cash voucher and guarantee card for a period of warranty at minimum.
For a case of transportation, pack the machine into the original box from the manufacturer,
thus ensuring a maximum protection of the product during a possible transport (e.g. moving or
sending into a service station).
Note: If you hand the machine over to next persons, hand it over together with the manual.
Adherence to the attached instructions for use is a precondition for the proper use of the
machine. The operation manual includes also instructions for operation, maintenance and
repairs.
The manufacturer does not take any responsibility for accidents or damages
resulting from the failure to adhere to this manual.
FDU 200801-E
EN
ASH VACUUM CLEANER OPERATING INSTRUCTIONS
11
General safety instructions
Carefully read, remember and keep these safety instructions
WARNING! In the use of electric machines and power tools, it is necessary to respect
and follow the following safety instructions for the reasons of protection against electric
shock, personal injury and danger of fire. The term “power tool” in the instructions below
refers both to mains-operated (corded) power tool or battery-operated (cordless) power tool.
Save all warnings and instructions for future reference.
Workplace
Keep the work area clean and well lit. Cluttered or dark areas in the workplace invite
accidents. Store power tools that you don’t currently use.
Do not operate power tools in environments with danger of occurrence of a fire or explosion,
such as in the presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep unauthorised persons, especially children, away from the work area while operating
a power tool! Distractions can cause you to lose control over the performed activity. In no
event leave your power tool unattended. Keep the equipment away from animals.
Electrical Safety
Power tool plugs must match the mains socket outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Undamaged plugs and
matching outlets will reduce risk of electric shock. Damaged or fouled supply cables increase
the risk of electric shock. If the power cord is damaged, it must be replaced by a new power
cord which is available at the authorised service centre or the importer.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, cooking
ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet conditions. Never touch the power tool with wet
hands. Never wash the power tool under running water or immerse it in water.
Never use the supply cable for other than intended purposes. Never use the cord for carrying
or pulling the power tool. Never unplug the plug from the outlet by pulling the cable. Keep
electric cables away from sharp or hot objects to prevent mechanical damage.
The power tool was designed to be powered solely by alternating electric current. Always
check if the electric voltage matches the information specified in the type label of the power
tool.
Never use power tool with damaged electric cable or plug or which has been dropped or is in
any way damaged.

EN 12 General safety instructions
If an extension cord is used, always check whether its technical parameters match the
information specified in the type label of the power tool. When operating a power tool
outdoors, use an extension cord suitable for outdoor use. If extension drums are used, these
must be rolled out to prevent overheating of the cord.
If a power tool is operated in a damp location or outdoors, its operation is only permitted if
connected to an electric circuit protected by a residual current device <30 mA. Use of residual
current device (RCD) reduces the risk of electric shock.
Hold the power tool by insulated gripping surfaces only as the cutting or drilling tool may
contact hidden wiring or its own power cord during operation.
Personal Safety
Be careful, stay alert and watch what you are doing when operating a power tool.
Concentrate on your work. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power tools may
result in serious personal injury. Do not eat, drink and smoke while operating a power tool.
Use personal protective equipment. Always wear eye protection. Use protective equipment
corresponding to the type of work you are doing. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used in accordance with the working
conditions will reduce the risk of personal injury.
Prevent unintentional starting. Do not carry the power tool while it is energised or with
your finger on the switch or trigger. Ensure the switch or trigger is in the “off” position before
connecting to power source. Carrying power tools with your finger on the switch or energising
power tools that have the switch on may result in serious injuries.
Remove any adjusting key or wrench before turning the power tool on. An adjusting wrench or
a key left attached to a rotating part of the power tool may result in personal injury.
Keep proper footing and balance at all times. Do not overreach. Never overestimate your own
capabilities. Never use power tools while you are tired.
Dress properly. Wear work clothes. Do not wear loose clothing or jewellery. Keep your hair,
clothing, gloves and other part of your body away from moving or hot parts of the power tool.
Connect the equipment to dust exhaustion. If the tools are provided for the connection of dust
collection or exhaustion devices, ensure these are properly connected and used. Use of such
devices can reduce dust-related hazards.
Fix the work-piece tightly. Use a cabinet clamp or a cramp to fix the work-piece you are about
to machine.
Never use power tools if you are under the influence of alcohol, drugs, medication or other
narcotic or addictive substances.
This equipment is not intended for use by persons (including children) with limited physical,
sensual or mental capacities or lack of experience or knowledge unless they are supervised
or instructed about the use of the equipment by a person responsible for their safety. Children
must be supervised to make sure they are not playing with the equipment.
FDU 200801-E
EN
ASH VACUUM CLEANER OPERATING INSTRUCTIONS
13
General safety instructions
Power Tool Use and Maintenance
Always disconnect the power tool from the mains in case of any problem during the work,
before cleaning the power tool or its maintenance, during each transportation and after the
completion of the work! Never operate a power tool if it is damaged in any way.
Immediately stop working if the power tool generates abnormal noise or smell.
Do not overload the power tool. The power tool will operate better and safer if it is used at the
rate for which it was designed. Use correct power tool which is intended for the given activity.
The correct power tool will do the job it was designed for better and safer.
Do not use the power tool if it cannot be safely turned on and off using the control switch.
Use of such power tool is dangerous. Defective switches must be repaired by a certified
service provider.
Disconnect the tool from the power source before making any adjustments, changing
accessories or maintenance. Such preventive safety measure prevents the risk of starting the
power tool accidentally.
Store idle power tools out of the reach of children and unauthorised persons. Power tools can
be dangerous in the hands of untrained users. Store the power tools in a dry and safe place.
Keep the power tool in good condition. Check the adjustment of moving parts and their
mobility. Check for any damage to the protective guards or other parts which could affect
safe operation of the power tool. If damaged, have the power tool properly repaired before
further use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges facilitate work, reduce the risk of injury and are easier to control. Use of accessories
other than those specified in the instructions for use could result in damage to the power tool
and cause injuries.
Use the power tool, accessories and tool bits etc. in accordance with these instructions and
in the manner intended for the particular type of power tool taking into account the working
conditions and the work to be performed. Use of the power tool for purposes other than those
the power tool was intended for could result in hazardous situations.
Use of Cordless Power Tools
Before inserting the battery, make sure the switch is in the “0-OFF” position. Inserting a battery
into a switched-on power tool could result in hazardous situations.
Charge batteries only using the chargers prescribed by the manufacturer. Using a charger
intended for other battery type could result in its damage and occurrence of fire.
Use only batteries intended for particular power tool. Use of different batteries could cause
injury or occurrence of fire.
If the battery is not used, keep it separately from metal objects such as clamps, keys, bolts
and other small metal items which could cause connection of one battery contact with the
other. Short-circuiting the battery could result in injury, burns or occurrence of fire.

EN 12 General safety instructions
If an extension cord is used, always check whether its technical parameters match the
information specified in the type label of the power tool. When operating a power tool
outdoors, use an extension cord suitable for outdoor use. If extension drums are used, these
must be rolled out to prevent overheating of the cord.
If a power tool is operated in a damp location or outdoors, its operation is only permitted if
connected to an electric circuit protected by a residual current device <30 mA. Use of residual
current device (RCD) reduces the risk of electric shock.
Hold the power tool by insulated gripping surfaces only as the cutting or drilling tool may
contact hidden wiring or its own power cord during operation.
Personal Safety
Be careful, stay alert and watch what you are doing when operating a power tool.
Concentrate on your work. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power tools may
result in serious personal injury. Do not eat, drink and smoke while operating a power tool.
Use personal protective equipment. Always wear eye protection. Use protective equipment
corresponding to the type of work you are doing. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used in accordance with the working
conditions will reduce the risk of personal injury.
Prevent unintentional starting. Do not carry the power tool while it is energised or with
your finger on the switch or trigger. Ensure the switch or trigger is in the “off” position before
connecting to power source. Carrying power tools with your finger on the switch or energising
power tools that have the switch on may result in serious injuries.
Remove any adjusting key or wrench before turning the power tool on. An adjusting wrench or
a key left attached to a rotating part of the power tool may result in personal injury.
Keep proper footing and balance at all times. Do not overreach. Never overestimate your own
capabilities. Never use power tools while you are tired.
Dress properly. Wear work clothes. Do not wear loose clothing or jewellery. Keep your hair,
clothing, gloves and other part of your body away from moving or hot parts of the power tool.
Connect the equipment to dust exhaustion. If the tools are provided for the connection of dust
collection or exhaustion devices, ensure these are properly connected and used. Use of such
devices can reduce dust-related hazards.
Fix the work-piece tightly. Use a cabinet clamp or a cramp to fix the work-piece you are about
to machine.
Never use power tools if you are under the influence of alcohol, drugs, medication or other
narcotic or addictive substances.
This equipment is not intended for use by persons (including children) with limited physical,
sensual or mental capacities or lack of experience or knowledge unless they are supervised
or instructed about the use of the equipment by a person responsible for their safety. Children
must be supervised to make sure they are not playing with the equipment.
FDU 200801-E
EN
ASH VACUUM CLEANER OPERATING INSTRUCTIONS
13
General safety instructions
Power Tool Use and Maintenance
Always disconnect the power tool from the mains in case of any problem during the work,
before cleaning the power tool or its maintenance, during each transportation and after the
completion of the work! Never operate a power tool if it is damaged in any way.
Immediately stop working if the power tool generates abnormal noise or smell.
Do not overload the power tool. The power tool will operate better and safer if it is used at the
rate for which it was designed. Use correct power tool which is intended for the given activity.
The correct power tool will do the job it was designed for better and safer.
Do not use the power tool if it cannot be safely turned on and off using the control switch.
Use of such power tool is dangerous. Defective switches must be repaired by a certified
service provider.
Disconnect the tool from the power source before making any adjustments, changing
accessories or maintenance. Such preventive safety measure prevents the risk of starting the
power tool accidentally.
Store idle power tools out of the reach of children and unauthorised persons. Power tools can
be dangerous in the hands of untrained users. Store the power tools in a dry and safe place.
Keep the power tool in good condition. Check the adjustment of moving parts and their
mobility. Check for any damage to the protective guards or other parts which could affect
safe operation of the power tool. If damaged, have the power tool properly repaired before
further use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges facilitate work, reduce the risk of injury and are easier to control. Use of accessories
other than those specified in the instructions for use could result in damage to the power tool
and cause injuries.
Use the power tool, accessories and tool bits etc. in accordance with these instructions and
in the manner intended for the particular type of power tool taking into account the working
conditions and the work to be performed. Use of the power tool for purposes other than those
the power tool was intended for could result in hazardous situations.
Use of Cordless Power Tools
Before inserting the battery, make sure the switch is in the “0-OFF” position. Inserting a battery
into a switched-on power tool could result in hazardous situations.
Charge batteries only using the chargers prescribed by the manufacturer. Using a charger
intended for other battery type could result in its damage and occurrence of fire.
Use only batteries intended for particular power tool. Use of different batteries could cause
injury or occurrence of fire.
If the battery is not used, keep it separately from metal objects such as clamps, keys, bolts
and other small metal items which could cause connection of one battery contact with the
other. Short-circuiting the battery could result in injury, burns or occurrence of fire.

EN 14 General safety instructions
Handle the batteries with care. Rough handling could result in leak of chemical substance
from the battery. Avoid contact with such substance and if, nonetheless, any contact occurs
wash the affected area under running water. If eyes get into contact with the chemical
substance seek immediately medical aid. Chemical substance from the battery can cause
serious injuries.
Service
Do not replace parts of the power tool, do not make any repairs or interfere in any way with
the construction of the power tool. Have your power tool repaired by qualified repair persons.
Any repair or modification of the product without our company’s authorisation is
impermissible (it could cause injury or damage to the user).
Always have your power tool repaired in a certified service centre. Use only original or
recommended replacement parts. This will ensure that your safety and the safety of your
power tool is maintained.
FDU 200801-E
EN
ASH VACUUM CLEANER OPERATING INSTRUCTIONS
15
Explanation of instruction labelson the machine
2. EXPLANATION OF INSTRUCTION LABELS
ON THE MACHINE
   
   
 
 
   
  
   ! "# $%
&

EN 14 General safety instructions
Handle the batteries with care. Rough handling could result in leak of chemical substance
from the battery. Avoid contact with such substance and if, nonetheless, any contact occurs
wash the affected area under running water. If eyes get into contact with the chemical
substance seek immediately medical aid. Chemical substance from the battery can cause
serious injuries.
Service
Do not replace parts of the power tool, do not make any repairs or interfere in any way with
the construction of the power tool. Have your power tool repaired by qualified repair persons.
Any repair or modification of the product without our company’s authorisation is
impermissible (it could cause injury or damage to the user).
Always have your power tool repaired in a certified service centre. Use only original or
recommended replacement parts. This will ensure that your safety and the safety of your
power tool is maintained.
FDU 200801-E
EN
ASH VACUUM CLEANER OPERATING INSTRUCTIONS
15
Explanation of instruction labelson the machine
2. EXPLANATION OF INSTRUCTION LABELS
ON THE MACHINE
   
   
 
 
   
  
   ! "# $%
&

EN 16 Machine description and scope of delivery
3. MACHINE DESCRIPTION AND SCOPE
OF DELIVERY
Machine Description (see Fig. 1)
1 – Switch
2 – Handle
3 – Motor Top Cover
4 – Motor Body Coverr
5 – Power Cord
6 – Collecting Container
7 – Clamps
10 – Filter
13 – Metal Hose
14 – Hose Connector
15 – Hose Handle
16 – Aluminum Tube
Scope of delivery
Remove the machine carefully from the packaging and check whether the following parts
are complete:
Ash Vacuum Cleaner
Cotton Filter
Metal Hose
Aluminum Tube
Warranty Certificate
User Manual
If any parts are missing or damaged, please contact the dealer from whom you purchased
the machine.
FDU 200801-E
EN
ASH VACUUM CLEANER OPERATING INSTRUCTIONS
17
Important safety instructions
4. IMPORTANT SAFETY INSTRUCTIONS
WARNING! In order to prevent the risk of fire, electric shock and injury please adhere to the
following instructions:
Never vacuum-clean burning or fuming items such as embers, cigarette butts or matches.
Do not use vacuum-cleaner without installed filter.
Never leave the appliance without surveillance when energized. Pull out the plug from mains
socket when not using the appliance for longer period as well as before each activity related
to its maintenance.
Never use the appliance outdoors and on wet surface due to the risk of electric shock. This
appliance is not a toy for kids. When the appliance is operated by a kid or is used near
children, close supervision over the children must be secured.
Do use the appliance exactly in line with the instructions that are contained in this instruction
manual and use just the accessories recommended by the manufacturer.
No not use the appliance when its power cord or socket shows any signs of damage. Contact
our customer service when you detect a function failure of your appliance after the appliance
fell to the ground, got damaged, was left outdoors or got in touch with water.
Do not pull the power cord nor use the cord as a strap when carrying the appliance. Make
sure the door is not closed on the cord or the cord is not drawn over sharp edges and corners.
Make also sure that the wheels do not pass at work over the appliance cord. Protect the cord
against the contact with hot surfaces.
When disconnecting the appliance from electric power supply do not pull out the plug from
the socket by holding the cord, always hold the plug instead.
When handling the appliance always keep your hands dry.
Do not insert any foreign items into appliance holes and when the holes are clogged, do not
switch the appliance on. Keep the holes dry and remove any dust, deposited remains, hairs
and all other impurities that would have an adverse impact on air flow.
Keep your hair, loose clothing, fingers and all other body parts out of reach of appliance
moving elements.
Switch off all appliance controls first and only then disconnect the plug from mains socket.
Pay special attention to the vacuum-cleaning of stairs.

EN 16 Machine description and scope of delivery
3. MACHINE DESCRIPTION AND SCOPE
OF DELIVERY
Machine Description (see Fig. 1)
1 – Switch
2 – Handle
3 – Motor Top Cover
4 – Motor Body Coverr
5 – Power Cord
6 – Collecting Container
7 – Clamps
10 – Filter
13 – Metal Hose
14 – Hose Connector
15 – Hose Handle
16 – Aluminum Tube
Scope of delivery
Remove the machine carefully from the packaging and check whether the following parts
are complete:
Ash Vacuum Cleaner
Cotton Filter
Metal Hose
Aluminum Tube
Warranty Certificate
User Manual
If any parts are missing or damaged, please contact the dealer from whom you purchased
the machine.
FDU 200801-E
EN
ASH VACUUM CLEANER OPERATING INSTRUCTIONS
17
Important safety instructions
4. IMPORTANT SAFETY INSTRUCTIONS
WARNING! In order to prevent the risk of fire, electric shock and injury please adhere to the
following instructions:
Never vacuum-clean burning or fuming items such as embers, cigarette butts or matches.
Do not use vacuum-cleaner without installed filter.
Never leave the appliance without surveillance when energized. Pull out the plug from mains
socket when not using the appliance for longer period as well as before each activity related
to its maintenance.
Never use the appliance outdoors and on wet surface due to the risk of electric shock. This
appliance is not a toy for kids. When the appliance is operated by a kid or is used near
children, close supervision over the children must be secured.
Do use the appliance exactly in line with the instructions that are contained in this instruction
manual and use just the accessories recommended by the manufacturer.
No not use the appliance when its power cord or socket shows any signs of damage. Contact
our customer service when you detect a function failure of your appliance after the appliance
fell to the ground, got damaged, was left outdoors or got in touch with water.
Do not pull the power cord nor use the cord as a strap when carrying the appliance. Make
sure the door is not closed on the cord or the cord is not drawn over sharp edges and corners.
Make also sure that the wheels do not pass at work over the appliance cord. Protect the cord
against the contact with hot surfaces.
When disconnecting the appliance from electric power supply do not pull out the plug from
the socket by holding the cord, always hold the plug instead.
When handling the appliance always keep your hands dry.
Do not insert any foreign items into appliance holes and when the holes are clogged, do not
switch the appliance on. Keep the holes dry and remove any dust, deposited remains, hairs
and all other impurities that would have an adverse impact on air flow.
Keep your hair, loose clothing, fingers and all other body parts out of reach of appliance
moving elements.
Switch off all appliance controls first and only then disconnect the plug from mains socket.
Pay special attention to the vacuum-cleaning of stairs.

EN 18
Never vacuum-clean liquids, flammable or explosive substances such gasoline, and do not
use the vacuum cleaner near such substances.
When you need to reel the cord, hold its plug firmly in your hand. During cord reeling do not
leave its plug to flutter freely in the air.
Before you put on the vacuum-clean hose, first pull out the plug from mains socket.
Never use the vacuum-cleaner without installed dust bag and/or filter.
A damaged supply cord of this appliance must be, for safety reasons, replaced by the service
department of the manufacturer.
This appliance is not designed for being operated by the persons (including the children of
up to 8 years of age) with limited physical, sensory and mental abilities or by the persons with
insufficient experience and/or knowledge. The operation of this appliance by those persons
is only possible assuming their safety is overseen by a competent person or this person
instructs them how to operate this appliance. Children must be under supervision to make
sure they do not play with the appliance.
This vacuum cleaner is intended just for dry vacuum-cleaning.
5. SAFETY MEASURES (FIG. 6)
Never vacuum-clean hot embers, burning items or the items with temperature
exceeding 40 °C (104°F).
Make sure your hands are dry and only then connect the plug into mains socket.
Never disconnect the appliance from mains by pulling power cord, always disconnect it by
pulling the plug.
6. VACUUM CLEANER ASSEMBLY (FIG. 2)
Before assembly or disassembly of accessories individual parts always first disconnect the plug
from mains socket.
Prepare all accessory parts (Fig. 2/A).
Put the tube on the hose handle (Fig. 2/B).
Assemble the flexible hose according to the figure and insert its ending with a connector into
the suction hole on vacuum cleaner upper side. Push inwards and a click is heard at the right
position (Fig. 2/C).
Important safety instructions | Safety measures | Vacuum cleaner assembly
EN
ASH VACUUM CLEANER OPERATING INSTRUCTIONS
19
Operating instructions | Maintenance after use | Filter cleaning
7. OPERATING INSTRUCTIONS
Turning on/off
The vacuum cleaner turns on using the ZAP/VYP switch (ON/OFF) (Fig. 3).
After turning the vacuum cleaner off
After vacuum cleaning is finished, turn off the appliance using the switch and pull the plug
from mains socket. Remove the hose from the sucking hole; hose removal requires applying
small force. Finally remove accumulated dust from the collecting container (Fig. 4).
9. FILTER CLEANING
We recommend to clean filter at least once a month or when it is visibly fouled or vacuum
cleaning force is reduced and motor noise is higher than usual.
Never use vacuum cleaner without installed filter. Operating vacuum cleaner without installed
filter leads to motor damage.
Before filter cleaning always disconnect the vacuum cleaner from power supply.
Filter cannot be cleaned in a dish washer.
Do not use a hairdryer for filter drying.
The best cleaning method is to shake out the filter.
8. MAINTENANCE AFTER USE
Unscrew the filter securing bolt and remove the filter.
Then clean or replace the filter.
When disassembling the filter proceed in steps according to Figures 5/A, 5/B.
When assembling the filter proceed in steps according to Figures 5/C.
FDU 200801-E

EN 18
Never vacuum-clean liquids, flammable or explosive substances such gasoline, and do not
use the vacuum cleaner near such substances.
When you need to reel the cord, hold its plug firmly in your hand. During cord reeling do not
leave its plug to flutter freely in the air.
Before you put on the vacuum-clean hose, first pull out the plug from mains socket.
Never use the vacuum-cleaner without installed dust bag and/or filter.
A damaged supply cord of this appliance must be, for safety reasons, replaced by the service
department of the manufacturer.
This appliance is not designed for being operated by the persons (including the children of
up to 8 years of age) with limited physical, sensory and mental abilities or by the persons with
insufficient experience and/or knowledge. The operation of this appliance by those persons
is only possible assuming their safety is overseen by a competent person or this person
instructs them how to operate this appliance. Children must be under supervision to make
sure they do not play with the appliance.
This vacuum cleaner is intended just for dry vacuum-cleaning.
5. SAFETY MEASURES (FIG. 6)
Never vacuum-clean hot embers, burning items or the items with temperature
exceeding 40 °C (104°F).
Make sure your hands are dry and only then connect the plug into mains socket.
Never disconnect the appliance from mains by pulling power cord, always disconnect it by
pulling the plug.
6. VACUUM CLEANER ASSEMBLY (FIG. 2)
Before assembly or disassembly of accessories individual parts always first disconnect the plug
from mains socket.
Prepare all accessory parts (Fig. 2/A).
Put the tube on the hose handle (Fig. 2/B).
Assemble the flexible hose according to the figure and insert its ending with a connector into
the suction hole on vacuum cleaner upper side. Push inwards and a click is heard at the right
position (Fig. 2/C).
Important safety instructions | Safety measures | Vacuum cleaner assembly
EN
ASH VACUUM CLEANER OPERATING INSTRUCTIONS
19
Operating instructions | Maintenance after use | Filter cleaning
7. OPERATING INSTRUCTIONS
Turning on/off
The vacuum cleaner turns on using the ZAP/VYP switch (ON/OFF) (Fig. 3).
After turning the vacuum cleaner off
After vacuum cleaning is finished, turn off the appliance using the switch and pull the plug
from mains socket. Remove the hose from the sucking hole; hose removal requires applying
small force. Finally remove accumulated dust from the collecting container (Fig. 4).
9. FILTER CLEANING
We recommend to clean filter at least once a month or when it is visibly fouled or vacuum
cleaning force is reduced and motor noise is higher than usual.
Never use vacuum cleaner without installed filter. Operating vacuum cleaner without installed
filter leads to motor damage.
Before filter cleaning always disconnect the vacuum cleaner from power supply.
Filter cannot be cleaned in a dish washer.
Do not use a hairdryer for filter drying.
The best cleaning method is to shake out the filter.
8. MAINTENANCE AFTER USE
Unscrew the filter securing bolt and remove the filter.
Then clean or replace the filter.
When disassembling the filter proceed in steps according to Figures 5/A, 5/B.
When assembling the filter proceed in steps according to Figures 5/C.

EN 20 Technical specifications
10. TECHNICAL SPECIFICATIONS
ASH VACUUM CLEANER:
Voltage / Frequency 220V-240V,50/60Hz
Input Power 800W
Ash Vacuum-Cleaning up to 40°C
Filter Cotton Filter
Metal Container 15L
Metal Hose 1m
Aluminium Hose 0.15m
Weight 3,2kg
Power Supply Cord 3m
Noise Level 80dB(A)
User Manual – Language version only.
FDU 200801-E
EN
ASH VACUUM CLEANER OPERATING INSTRUCTIONS
21
11. DISPOSAL
INSTRUCTIONS AND INFORMATION ON DISPOSAL OF USED PACKAGING.
Put any used package material to the place determined by the municipality for waste
disposal.
DISPOSAL OF USED ELECTRIC AND ELECTRONIC EQUIPMENT
This symbol on products or accompanying documents means that used
electric or electronic products must not be put to ordinary municipal waste.
Hand over such products to determined collection points for proper disposal,
restoration and recycling. Alternatively, in some countries of the European
Union or other European countries you can return your products to your local
dealer when you buy an equivalent new product. By dutiful disposal of this
product you can preserve precious natural resources and you help prevent any
potential adverse effects on the environment and human health which could
be the results of wrong waste disposal. Ask your local authority or the nearest
collection point for additional details. In case of improper disposal of this waste
kind penalties can be imposed in accordance with national regulations.
For companies in the European Union countries
Should you want to dispose of electric and electronic devices, ask your dealer
or vendor for necessary information.
Disposal in other countries outside the European Union
Should you want to dispose of this product, ask your local authorities or your
dealer for necessary information about disposal method.
This product fulfils all basic requirements of the EU directives that apply to it.
Text, design and technical specifications can change without prior notice and we reserve
the right for their change.
Disposal