Fineart FINE 3160 DG User manual

P/N:390711000004 Edition: C
This product has passed the final check for both functionalities and package when delivered from
the factory. All users should observe the instructions and pay attentions to the warnings covered
by this manual. Unreasonable damages resulting from unintended operations or not heeding
instructions covered by this manual will void the warranty. Specifications in this manual intend
for reference only, the fixture delivered takes the priority. Any future modification pertaining to
content of this manual, there will be no particular notifications. CAIYI reserves all copyrights.
To obtain the latest information about software update, hardware and other files, please visit
CAIYI online website.
http://www.fineart-light.com
Thanks for purchasing FINE 3160 DG, which is wash wall lights with 7different
colored light sources (i.e. LEDs) for color mixing. These recently launched LED
fixtures are provided with aluminum alloy housing. They are perfect outcomes
of advanced electronic controlling technology and exceptional user friendly design.
Compliant with CE and support international standardized DMX512.
The light source comprised of high-intensity 3W LED chips can achieve homogeneous
and pure color-mixing output through delicate arrangement of LEDs. These LEDs are
controlled via an on-board microprocessor and supplied with an accurate constant-
current controlling mode. The brightness of each LED can vary from a minimum value
of zero to a full-scale of 256, and the consultant color output is rich. Built-in programs
are available through relevant menus and used for scenery editing and "MASTER -
SLAVE" controlling- mode setting. Effects, such as rainbow, variable strobes and
motorized dimming, can be edited further in great details.
FINE 3160 DG LED fixture is truly "green" products with essential characters
like fast response, anti-shock, impact-proof, excellent heat arrangement, high pro-
tective rating, extraordinary service-life ( LEDs can reach 50 000 hours), negligible
radiations, high-efficiency and low-consumption.
FINE 3160 DG LED fixture is preferred for fixed lighting and background of large
stages, typically cultural shows, gym lighting, provisional stage, city lighting, TV
studios, conference center, theatre, park, dancing hall, bar, public lighting, etc.

-1-
1.Safety information
2.Product introduction
3.Package & delivery
4.nstallation
5.Tips for data link.
6.AC power supply
7.Control panel
8.Technical feature
9.Controlling channels
Appendix 1: fixture exploded drawing
Appendix 2: FINE 3160 DG illuminance diagram
Appendix 3: FINE 3160 DG wiring diagram
.....................................................................................2
..................................................................................4
2.1Fixture profile dimensions....................................................................4
2.2Fixture introduction.............................................................................5
...................................................................................6
3.1Included items.....................................................................................6
................................................................................................6
.......................................................................................7
5.1DMX512 connection............................................................................7
.......................................................................................8
6.1Fuses.................................................................................................8
6.2Power connection................................................................................8
.............................................................................................9
7.1Control panel introduction....................................................................9
.....................................................................................12
8.1Production feature explanation...........................................................12
...............................................................................12
9.1Menu control.....................................................................................12
9.2DMX control......................................................................................13
.........................................................................................14
10.Ordering P/N

--2
c
The following symbols are used to identify important safety information on the product
and in this manual:
WARNING!
Read the safety precautions in this section before installing,
powering, operating or servicing this product.
After receiving the fixture, please unpack and check if there is any damage due to
transportation. If any obvious damage or flaw is found, do not put it into use and co-
ntact the distributor or manufacturer as soon as possible.
This fixture is intended for professional use .only
When operating the fixture, attentions should be drawn to fire/electric-
shock hazards and lethal injuries caused by fall.
Read this User Mannual before mounting and ennergizing the fixture.
Observe the safety guideline and notice the warnings both in this User
Mannual and on the fixture.
Yet any safety concerns not covered hereby, contact the distributor or
service hot-line.
The fixture is intended for indoor application, its protection rating is IP20.
The fixture should be kept dry and avoid working in presence of moisture,
over-heat or heavy smokes.
Protection against over heat
1.

1
Please do not install the fixture onto combustible surface.
Do not attempt to bypass the thermostat switch or fuse.
Replace defective fuses with specified ratings only.
Keep flammable materials far away from the fixture. Minimum distance
from the flammable materials is 0.5m.
Under the steady working state, the max temperature of exterior surface
of FINE 3160DG is 70 , Please℃don’t touch the moving head during
movement.
The minimum distance between the fixture and the lighted objects is 1m.
Ensure a minimum clearance of 0.1m around the cooling fans and ve-
ntilations.
Do not place any filter or other object onto the optical lens.
Allow the fixture to cool for at least 15 minutes before transit.
Do not revise the fixture or install any parts not from Guangzhou CHAI
YI LIGHT Co.Ltd.
Protection against electrical shock
All electrical connections must be performed by a qualified person with
technical certificate.
Make sure that the mains power supply you use is up to local construc-
tion and electronic code regulation, the over-load protection reliable
earthing is essential.
Each fixture must be grounded correctly, and be installed according to
related regulation.
Disconnect the fixture from mains supply before replacing any fuse.
Avoid using the fixture in damp environment.
-3-
Protection against burning or fire
Protection against explosion
Shields must be replaced if they have become visible damaged to such
an extent that their effectiveness is impaired.
Protection against injury due to falls
To inspect that the structure and the truss hooks are in good condition
and can bear about 10 times the weight of the fixture.
Ensure the cover and all riggings are securely fastened, safety wire is
necessary to use as a secondary attachment.
Block access below the working area and work from a stable platform
while installing, servicing or moving the fixture.
The natural working temperature should be lower than 45 degrees. If
the ambient temperature exceeds 45 degrees, please stop operating
the unit immediately.

-4-
2.1 Fixture profile dimensions
Front view
Side view
2.

-5-
2.2 Fixture introduction
FINE 3160 DG illustrated as an example below:
Front view
Rear view
LED cooling housing
LED lens
Hanger
Bracket
Grating plate
Adjusting bolt
Arc plastic handle
Foot pad
1
2
3
4
5
6
7
7
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
4
5
Cooling fan
Power output
Power input
DMX output
Display
Control button
DMX input
9
10
11
12
13
14
15

-6-
Package & delivery
FINE 3160 DG is packed with flight case or carton with foam backing. One
single standard flight case carries TWO fixtures . Included items listed in the
table below.
Accessories
User manual
Warranty card
Suspension fasteners
Signal cable
Safety wire
1
1
2
1
2
UNIT
PCS
PCS
SET
PCS
PCS
QTY
Table.3.1-1
User must be termly check the fixture and its install materials, if you are non-
qualified to check that, please contact the professional person. Wrong installation
will result in fatal hazard.
The fixture working ambient temperature are between -20 45 , When ambient～℃
temperature over the range, don't operate the fixture. When the fixture are in
installtion, teardown, remove or servicing, don’t stand in under the fixture.
Operator must be insure the fixture are safely connected. The input power supply
must match the specific type demanded by the fixture. Make sure the installation
check annually by professional person.
FINE 3160 DG illustrated as an example below:
Placed on the floor
Fig.4.1-1
Installation
3.
3.1
4.

-7-
Suspended from a truss
Fig.4.1-2
safety
wire
Warning
Loop a safety wire through at least one mounting bar!
Grating plate
Slot for the
grating plate
The use of the grating plate is optional:
1. When in use, the smooth flat surface of grating plate
faces outwards.
2. The grating plate can be replaced by any other
secondary optics.
Fig.4.1-3 Housing assembled with grating plate
Tips for data link
5.1 DMX512 connection
Note: The signal cable was type X connection.
Type X connection—if the external flexible cable or cord of this fixture is damaged,
it shall be replaced by a special cord or cord exclusively available from the
manufacturer or his service agent.
5.

-8-
3-pin XLR connecters are provided for fixture DMX input and output. Pin 1 is
for earthing, pin 2 is for minus signals, and pin 3 is for plus signals. To prevent
and absorb the reflection and interference of the signals, each data link must
be ended by a respective terminator.
3 pin XLR connector-
Terminator
Terminator specification: a
120 plug-in resistor with
rated power of 0.25W,
soldered between pin 2 and
pin 3 at the end of respective
data link.
Ω
Fig.5.1-1
Connect the 3-pin output of a lighting controller to the 3-pin input of a first
fixture on the link, then connect the 3-pin output of the said first fixture to the 3-
pin input of a second fixture. Similarly, repeat the above connection step and
end the data link with a plug-in terminator. Shown as Fig. 5.1-2 below.
Controller
Terminator
If long-distance data transfer occurs, a DMX512 signal amplifier is necessary.
The added amplifier is inserted between the lighting controller and the first
fixture on the basis of a normal data link.
Fig.5.1-2
Notice:
1. No more than one signal input or output can occur in one fixture.
2. Don’t split a data link via output ports on the fixture, use a DMX512 signal
amplifier instead, if necessary.
3. Use only shielded-pair cables, and standard microphone cable is not reliable
for long-distance data transfer.
DMX512 standard
1. (shield)〨
2. Red
3. White
Ground
Data -
Data +
input
output
input

input
output
input
output

Table 6.1-1
AC power supply
Notice: Type Y attachment for power supply connection. Method of attachment
of the cable or cord such that any replacement can only be made by the manu-
facturer, his service agent or similarly qualified person.
Connecting the equipment to the power supply, do not connect to silicon box
system, or else, it will destroy the equipment. The fixture is provided with sta-
ndard 2-pin socket. Please according to table 6.2-1 connect to power supply,
Yellow/green line must be earthed. If you still have any question to the install-
ation, please consultant with the experienced electrician.
Color
Brown
Blue
Yellow/Green
Wire
Live
Neutral
Earth
Mark
L
N
7.Control panel
7.1 Control panel introduction
1. Mains output
2. input
3. Menu
Mains
button
7. Display
8. DMX input
9. DMX output
4. Enter button
5. Up button
6. Down button
Fig.7.1-1
-9-
①
②③④⑤⑥
⑦
⑧
⑨
6.
6.1

Addr
Ctrl
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
-10-
Dimr
R
OrgR
G
BluG
B
I
RylB
S
Ambr
H
strd
Hc
Macr
Hf
Auto
Cltp
opt.
Overall dimming
Red dimming
Orange-red dimming
Green dimming
Blue-green dimming
Blue dimming
Luminance
Royal blue dimming
Saturation
Amber dimming
Chroma
Strobe
Chroma tuning
Color macro
Chroma fine tuning
Show routine
Color temperature low to high
opt.
opt.
opt.
func.
func.
func.
func.
func.
func.
func.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
opt.
func.
func.
func.
func.
func.
func.
func.
func.
func.
func.
func.
func.
func.
func.
func.
sub.
Mode
Ch05
Ch06
Ch08
Ch11
Ch12
Option 5-channel mode(high luminance HSI
mode)
Option 6-channel mode(high chroma HSI mode)
Option 8-channel mode
Option 11-channel mode(default mode)
Option 12-channel mode(color temperature adju-
stable mode)
sub.
001-512
func. Address setup
Temp Txxx
func.
sub. Display present temperature of LED
mounted board.
Display panel operational function detail

-11-
opt. func.
sub.
Autp Swth On
Off
Temperature Control enabled
Temperature Control disabled
func.
func.
func.
func.
sub.
Stub
000-009
010-250
250-254
255-255
No strobe function
1-25Hz
25Hz
LED on without strobe
func.
sub.
TEST Off
On
All LED off
All LED on
Ver XXXX
func.
sub.
Display version number

-12-
●
●
●
●
●
●
●
●
●
●
●
●
●
Optional lens come with spreading angles of 15°, 20°,25°, 30 °,45°and
60°.
Input Power:410W
All secondary optical lens are made of PMMA, grid plate for adjusting color
mixing,
Power supply: LEDs are driven in a constant-current mode, PFC capacity ,
PF >=0.98.
Input voltage: 100-240V~, 50/60Hz.
.
Data input/output: 3-pin XLR connector
Protection against over-current, over-voltage, over-heat.
7 colors, variable strobes, rainbow effect, independent dimming,
brightness controlling scale 0-256, rich colors and effects, free of flicker.
Housing material: aluminum alloy.
Color : standard color - black, other colors available on request.
Protective ratting: IP20
Weight:27.4KG
Size:544X370X487 mm.
Compliant with CE standard and GB7000.2.17-2008, GB7000.1-2007
standard.
8.1 Production feature explanation
8.

-13-
9.1 Menu control
DMX channel
Channel Ch05 Ch06 Ch08 Ch11 Ch12
1 Intensity Intensity Intensity Intensity Intensity
2 Saturation Saturation Red Red Red
3 Hue Hue OrangeRed OrangeRed OrangeRed
4 strobe Hue Fine Green Green Green
5 Auto strobe BlueGreen BlueGreen BlueGreen
6 Auto Blue Blue Blue
7 RoyalBlue RoyalBlue RoyalBlue
8 Amber Amber Amber
9 Strobe Strobe
10 Macro Macro
11 Auto Auto
12 Color
Temperature
Value Function
Ch05 Ch06 Ch08 Ch11 Ch12
Intensity
0--255 %Intensity 0 to 100
Saturation
0--255 %Saturation 0 to 100
Hue
0--255 %Hue 0 to 100
Hue Fine
0--255 %Hue Fine 0 to 100
33
1
Mode/Channel
11 11
22
4

,PShutter strobe
0--9 no function
10--250 -Strobe 1 25Hz
250-254 Strobe 25Hz
255 Led turn on
Auto
0--1 no function
2--255 &Hue Rotating Speed
Red
0--255 ( -- , -- % )Red 0 Black 255 100 Red
OrangeRed
0--255 ( -- , -- % )OrangeRed 0 Black 255 100 Red
Green
0--255 ( -- , -- % )Green 0 Black 255 100 Red
BlueGreen
0--255 ( -- , -- % )BlueGreen 0 Black 255 100 Red
Blue
0--255 ( -- , -- % )Blue 0 Black 255 100 Red
RoyalBlue
0--255 ( -- , -- % )RoyalBlue 0 Black 255 100 Red
Amber
0--255 ( -- , -- % )Amber 0 Black 255 100 Red
Macro
0--1 no function
2-255 127 Macros
Auto
0--9 no function
88
66
44 4
55 5
10 10
1111
33 3
22 2
8
6
77 7
45 9 9
56
-14-

-15-
10--19 &Red Turning On Off
20--29 &OrangeRed Turning On Off
30--39 &Green Turning On Off
40--49 &BlueGreen Turning On Off
50--59 &Blue Turning On Off
60--69 &RoyalBlue Turning On Off
70--79 &Amber Turning On Off
80--89 &All Leds Turning On Off
90--99
,,,,Red OrangeRed Green BlueGreen
,,Blue RoyalBlue Amber Turning On
& Off in Sequence
100-109
+,+,Red OrangeRed Green BlueGreen
+,Blue RoyalBlue Amber Turning On
& Off in Sequence
110-119
,,,,Red OrangeRed Green BlueGreen
,,Blue RoyalBlue Amber Rolling in
Sequence
120-129 2 mixup of 7 colors rolling
130-139 3 mixup of 7 colors rolling
140-149 4 mixup of 7 colors rolling
150-255 3 mixup of 7 colors exchange rolling
Color Temperature
0--9 ( )Normal 6500K
10--19 3200K
20--29 3400K
30--39 4200K
40--49 4900K
50--59 5600K
60--69 5900K
1111
12

-16-
9.2 Intelligent temperature control
9.3 Restore factory settings
9.4 Color temperature compensation
1. Intelligent cooling: when the temperature is less than 65 degrees,
the LED lights work in the highest brightness; when the temperature
ranges from 65 to 90 degrees, every 1 degree increase of
temperature, the brightness of LED will reduce by 1/32 for cooling;
when the temperature is higher than 90, the brightness of LED directly
reduced to 0.
2. Intelligent fan speed adjustment: 6s after the lamp on power and
when in the online upgrade state, the fan runs at full speed; the other
time when the temperature is less than 30 degrees, the fan does not
turn; when the temperature is 30-60 degrees, every 1 degree increase
of temperature, fan speed will increase by 1/30; when the temperature
is greater than 60 degrees, the fan runs in full speed.
1. Restore factory settings will clear all settings parameter value,
restore to factory defaults.
2. Operation instructions: keep pressing "up" and "down" keys until
the "Init" interface appears. Under the "Init" interface, press the OK
button to clear all the parameters and restore the factory defaults. Any
of the other three keys will exit directly without changing any
parameters
1. Color temperature compensation: lamps can automatically
compensate the color temperature according to the temperature of
the lamp body, so that when the lamp body temperature changes, the
color temperature can be consistent.
2. Color temperature curve compensation: when the lamp is dimmer,
the dimming curve of the cold tone LED is corrected to ensure that the
color temperature can be consistent when the total dimming
brightness changes.
70--79 6500K
80--89 7200K
90--99 8000K
100-109 8500K
110-119 10000K
120-255 Reserved
12

-17-
*No. above corresponding with those illustrated in exploded drawing.
10.
NO. Item Specification Ordering index
1LEDlens ,15 degree fogging surface diameter
., .19 6mm height 19 6mm 200711000015
2-Aluminum alloy
base 330711100006
3Main control
panel 330711100014
4350W power
supply 330000300005
5 Cooling fan DC plastic blade propeller fan
-AD0812MB C70 159901101229
6 Display 330711100007
7 XLR signal panel 330386100002
8 Adapter plate 339907033502

-18-
Appendix 1: Fixture exploded drawing
No. Name No. Name
1 Acrylic board 11 Back cover
2 Holographic diffusion film 12 -Dust proof net cover board
3 Fixed plate for lens 13 Display
4 Lens 14 XLR signal panel
5-Aluminum alloy base 15 Main control panel
6 Left and right end cover 16 The silicone thermal pad
7-Aluminum alloy profile 17 Fixed plate for main control panel
8 Fixed plate for power 18 Left and right side panels
9 350W power supply 19 Lamp bracket
10 Cooling fan 20 Curved plastic pumps

Spot dia(m)
Spot dia(m)
Spot dia(m)
-19-
W()lux 0
RylB()lux
B()lux
BluG lux()
G()lux
OrgR()lux
R()lux
Ambr()lux 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
θmax=36°
2m
4m 6m
8m 10m
12m 14m
14m
12m 10m
8m 6m
4m 2m
0m
2367 592 263 148
377 94 42 24
250 62 28 16
91 23 10 6
612 153 68 38
824 206 92 52
268 67 30
191 48 21
95 66
15 10
10 7
43
24 17
33 23
17 11 7
12 8 5
3.05 6.09 9.14 12.19 15.14
2.96 5.92 8.88 11.84 14.80
3.20 6.39 9.59 12.78 15.98
3.10 6.20 9.30 12.41 15.51
3.14 6.28 9.42 12.55 15.69
3.07 6.13 9.20 12.26 15.33
3.08 6.17 9.25 12.33 15.42
3.12 6.24 9.36 12.48 15.60
18.28
17.76
19.18
18.61
18.33
18.39
18.50
18.72
Horizontal
Spot dia(m)
Spot dia(m)
Spot dia(m)
Spot dia(m)
Spot dia(m)
Spot dia(m)
Appendix 2: FINE 3160 DG lluminance diagram