Fischer Connectors A004-3 User manual

Connector :
Series 1051 A004-3 and -4
General Instruction
Fischer Connectors SA
Saint-Prex, Switzerland
Phone [phone]
Fax [phone]
www.fischerconnectors.com
[e-mail]
Assembly Instruction
Instruction de Montage
Montageanleitung
DS 1051 A004-3 1.0/5.0 and DS 1051 A004-3 1.4/6.6
Document No. 600.00.453 Rev : 1.1 Date : 14 Sep. 18 Established b : SKE Approved b : DHD
© Fischer Connectors SA / All rights reserved
This document is the property of Fischer Connectors SA.
All communications to third parties or the reproduction in any form, even partial, are prohibited without our written consent.
This is a functional part only.
It is designed to hold the braid in place
whilst soldering to the back of the
connector. After this operation the part
will be loose.
Page 1/5

Connector : Series 1051 A004-3 and -4
General Instruction
Document No. 600.00.453 Rev : 1.1
DB 1051 A004-3 1.0/5.0 and DB 1051 A004-3 1.4/6.6
This is a functional part only.
It is designed to hold the braid in place
whilst soldering to the back of the
connector. After this operation the part
will be loose.
Page 2/5

Document No. 600.00.453 Rev : 1.1
DSR and DKE 1051 A004-3
Connector : Series 1051 A004-3 and -4
General Instruction
Page 3/5

Document No. 600.00.453 Rev : 1.1
SE and KE 1051 A004-4 / DSR and DKE 1051 A004-4
Connector : Series 1051 A004-3 and -4
General Instruction
L
Page 4/5

Document No. 600.00.453 Rev : 1.1
SE, KE, DSR and DKE 1051 A004-4 1.4/6.6/12.6
Connector : Series 1051 A004-3 and -4
General Instruction
Page 5/5