• Place the booster seat upright on a bench.
• Unfasten the seat back and lift.
• Wrap the strap around the bottom of the bench .
• Fasten both straps . Make sure you hear a “click”.
• Tighten the strap .
• Pull down on the strap to be sure it is secure around the
bench bottom.
• Lower the seat back and fasten the fastener.
• Unzip the booster seat large pocket.
• Remove the plastic seat insert from the booster seat.
Wipe the plastic seat insert and booster seat liner with
a mild cleaning agent and damp cloth. Rinse with
clean water to remove soap residue.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©1999 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China 79463pr-0920
Consumer Information
Occasionally a consumer may experience a problem with
one of our products. If this should happen, please call us,
toll-free, rather than return this product to the store. Usually
we can solve the problem on the telephone or by sending
you replacement parts. Please call Fisher-Price®Consumer
Affairs, toll-free at 1-800-432-KIDS, 8 AM - 5 PM EST
Monday through Friday. Hearing-impaired consumers using
TTY/TDD equipment, please call 1-800-382-7470. Or, write
to: Fisher-Price®Consumer Affairs, 636 Girard Avenue,
East Aurora, New York 14052.
1
2Seat Back Strap
• Turn the booster seat upside down.
• Fasten the strap hooks to the booster seat attachment
rings. Pull up on each hook to be sure it is secure to each
attachment ring.
For Backpack:
• Fit the strap through the loop on the booster seat.
• Fasten both straps. Make sure you hear a “click”.
• Tighten or loosen the strap, as needed.
For Carry Pack:
• Fasten both straps. Make sure you hear a “click”.
• Tighten or loosen the strap, as needed.
• Turn the booster seat upside down.
• Unfasten the fasteners on the sides of the booster seat to
locate the attachment rings.
• Fasten the strap hooks to the booster seat attachment rings.
Pull up on each hook to be sure it is secure to each
attachment ring.
• Fasten the fasteners on the sides of the booster seat.
• Position the plastic
seat insert with the seat
back facing up.
• Position the booster seat
liner with the mesh pocket
upright. Unfasten the
zipper on the large pocket.
• Fit the plastic seat insert
into the large pocket in the
booster seat liner, so that
the seat back fits into the
upper pocket.
• Fasten the zipper closed.
Care
IMPORTANT! Before each use or assembly, inspect this
product for damage. DO NOT use if any parts are missing or
broken. Contact Fisher-Price®for replacement parts and
instructions if needed. Never substitute parts.
Attaching to a Bench
1
2Loop
Strap
Hook
Attachment
Ring
Hook
Attachment
Ring
Hook
Attachment
Ring
Fastener
Hook
Attachment
Ring
Fastener
Upper
Pocket Mesh
Pocket
Large
Pocket
Seat
Back
Plastic Seat Insert
A
C
B
C
A
B
Backpack
Carry Pack
Using as a
Backpack or Carry Pack
