Fisher 2445 User manual

fisher manufacturing company
Stainless Steel Covered Reel Rinse
Product Installation Guide
Since 1936, Fisher Manufacturing Company has
manufactured heavy-duty, high quality plumbing
products and hardware specialties for the food service
industry. For three generations, the Fisher family has
adhered to a strict dedication of and overall value.
When you install Fisher products… you install
the best. Our hardware is manufactured with the
standardization of internal mechanisms. All chrome
plating is triple plated copper, nickel and chrome
for durability. Every piece of equipment we make is
rigorously tested in both our modern in-house testing
center and in actual field situations under extreme
conditions. Every detail is thoroughly checked. Before
we make our products available to you, they pass
each and every test. You get proven performance.
Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year after the date of original purchase. During
this period Fisher Manufacturing Company will
replace a defective product or part without charge to
you, provided that the entire product is delivered to
Fisher Manufacturing Company. All transportation
and insurance charges for shipping the product to and
from Fisher Manufacturing Company must be borne
by you. Charges for transportation and insurance
may, at the option of Fisher Manufacturing Company,
be refunded depending upon our investigation of
the warranty claim. This warranty does not cover
external finish (except at date of original purchase)
or labor costs not specifically authorized by Fisher
Manufacturing Company.
A full and complete copy of our One Year limited
warranty is available upon request.
#8253 - Service Sink Faucet: Long Spout with Wall
Bracket, Vacuum Breaker, Polished Chrome
#2445 - Service Sink Faucet: Short Spout, Vacuum
Breaker, Polished Chrome
KEEP THIS MANUAL FOR FUTURE REFERENCE
ANSI/A112.18.1M, ANSI/NSF 61.9
fisher manufacturing company - toll free: 800-421-6162 fax: [phone]
www.fisher-mfg.com
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
[phone], FAX: [phone]
www.fisher-mfg.com
2000-7500
SCREW
2000-8000
RED BUTTON
AND
2000-8001
BLUE BUTTON
2000-2301
LEVER HANDLE
2000-3002
BIBB CAP
10464
DUCK GASKET
2000-5000
WASHER
2000-3405
LH CHECK STEM
OR
2000-3407
RH CHECK STEM
2000-6000
SPRING
2000-0001
RETAINER
ASSEMBLY
10456
LUBE
2000-0004
RH CHECK STEM
REPAIR KIT
OR
2000-0005
LH CHECK STEM
REPAIR KIT
8253
SERVICE SINK FAUCET
Replacement Parts for Sevice Sinks
PART NO. 40665 REV. A
1792
ANGLE STOP
WITH KEY
1790-1
ANGLE STOP
W/ CROSS
HANDLES
2445
SERVICE SINK FAUCET
10049 (24”)
10006 (36”)
SUPPLY LINE
1/2” M X 1/2”F
8250-2300
WALL FLANGE
8250-3300
ROD ADJUSTER
8250-3302
SUPPORT ROD
3200-2306
ECCENTRIC
FLANGES
3200-2307
1/2” ECCENTRICS
2200-5000
ECCENTRIC
GASKETS
2400-2103
ELBOWS
2200-0000
NIPPLE KIT
29203
EZ INSTALL KIT
FOR T&S
34673
EZ INSTALL KIT
FOR CHICAGO
3990-8001
VACUUM BREAKER
REPAIR KIT FOR
1/2” NPT
2902-7402
WALL BRACKET
SCREW
8254-7000
SCREW

PST
[196.9mm-209.6mm]
7-3/4"-8-1/4"
[196.9mm-209.6mm]
7-3/4"-8-1/4"
Installation Instructions for Pre-Rinse Units
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
• Phillips Screwdriver
• 7/16” Drill Bit
Installation Instructions
READ BEFORE INSTALLATION:
Before removing any existing T&S, Chicago, CHG,
or Dormont hardware, read the instructions on next
page labeled “EZ Install Adapter Instructions”
1. Insert the eccentric gasket into the groove on the
eccentric. Making sure gasket is in place, loosely
mount the eccentric and flange onto the control
valve body.
2. Mount control valve body to either a wall with male
supply nipples, or a backsplash with nipples (not
included). Be sure to use pipe thread sealant on
the supply nipple threads. Adjust the eccentrics as
needed in order to mount the control valve level.
Once level, tighten the eccentrics.
3. To install the wall bracket, first attach the rod
adjuster to the rod. Do not completely screw
the adjuster onto the rod in case some future
adjustment is necessary. Using one of the small
screws, attach the rod adjuster to the faucet spout.
Attach the other end of the rod to the wall bracket
flange using the other small screw. To complete wall
bracket installation, attach the flange to the wall or
backsplash using the longer wall screws.
Step 1
Step 2 Step 3
1/2” NPT Supply
Nipples (not included)
Ø7/8”
1/2” Nipple Kit
(optional)
Elbows
(optional)
Installation Instructions Continued
Fisher Washer
EZ Install
Adapter
Gasket
EZ Install Adapter Instructions
If replacing T&S, Chicago, CHG, or Dormont Faucets, use the EZ
Install Adapter that is included with your Fisher faucet to simplify
installation.
1. Remove existing faucet by unthreading connecting nut.
2. Place new washer into fitting. Thread in Fisher EZ Install
Adapter.
3. Using another new washer, mount the new Fisher faucet onto
the EZ Install Adapter and tighten. Discard the eccentrics
supplied with new Fisher faucets.
Fisher Washer
EZ Install
Adapter
New Fisher
Faucet
Eccentric
Flange
Screw
Wall Flange
Rod
Rod
Adjuster
Screw
Remove Old
Control Valve
Step 2Step 1
Step 3