General Information and Safety Instructions
Quick Installation Guide
Special Notes
1. This device requires Microsoft Windows™ XP, Vista or 2000/SP4, as
well as Microsoft DirectX™ 9.01a or above. Before driver and software
installation, download DirectX™ 9.01a from Microsoft website www.
microsoft.com (if not already installed).
2. The power consumption of a USB port is limited; therefore, please
disconnect all other USB devices when using your USB Digital TV
device (DTV). If the “USB Device Not Recognized” error message pops
up while connecting the USB DTV device, please disconnect all USB
devices and try to reconnect.
3. Please note that each USB port has a unique ID; therefore, when the
USB DTV device is connected to a USB port, which has never been
connected with this device before, the system will promptly re-install
the driver. Please follow the procedures of Driver Installation to install
the drivers properly (after installation as below). This is particularly
obvious when using a USB Hub.
After Sales Support TEL: 1300 558 702 WEB: www.unisupport.net 04