FitCheck Technology FC6110 User manual

1
7
4
2
8
5
3
6
Charging your FitCheck®
FC6110
Attach optional LED extender Turn on FitCheck®device
Attach FitCheck® device Attach optional filter button Don mask and perform fit check
Using the
FitCheck®
mobile app
A green light illuminates on the LED indicator
for a passed test
LED indicator - Pass
A red light blinks on the LED indicator for
a failed check. Wait until the LED indicator ashes
purple signalling for a retest of the t check.
LED indicator - Failed
Continues overleaf >
Quick start guide
Ensure your FitCheck®is fully charged before use.
Charging can be done via the USB-C port on the
side of the device.
*Always use USB-C cable supplied
USB-C
charging cable
Attach the optional LED extender into the
USB-C port if the light on the device is not
visible for indication.
Press and hold power button until green light
ashes then release.
Press and hold power button to turn device off.
Position FitCheck® over the face of the lter and
turn clockwise until device locks into position.
Position closure button on the face of the lters
and twist clockwise to lock into position.
Press and hold the optional lter button to seal
device (or cover lter with hand), draw a breath until
the ashing purple LED turns solid, at which point
hold your breath static for up to 10 seconds and
wait for the result.
>

Install the FitCheck®app Turn on your FitCheck®
Choose user
06-11-201914.28:04
Users
CHOOSE USER
Add User
Graham
Tony
Mike
Cancel...
RESULT
Future Technology
Don your mask with the FitCheck® attached to
the mask. Perform a t check -
see previous point
6 on how to perform a check.
Don mask and perform fit check
06-11-201914.28:04
Reports
Reports
N/A 06-11-2019 14:32:31
N/A 06-11-2019 14:48:36
N/A 06-11-2019 15:28:15
N/A 06-11-2019 16:52:40
N/A 06-11-2019 17:15:24
N/A 06-11-2019 17:27:22
06-11-201914.28:04
Reports
Reports
N/A 06-11-2019 14:32:31
N/A 06-11-2019 14:48:36
N/A 06-11-2019 15:28:15
N/A 06-11-2019 16:52:40
N/A 06-11-2019 17:15:24
N/A 06-11-2019 17:27:22
A solid green band will display on the app for a
passed test or a solid red band for failed test.
Pass or fail indication
www.tcheck.systems
Manufactured by Design Reality Limited under license from Respiratory Protection Limited
1
4
2
56
FC6110
Using the FitCheck®mobile app
Download and install the FitCheck®app
on your device.
Available for IOS, Android, PC and can be
connected wirelessly via Bluetooth®.
ON
Turn on Bluetooth®
ON
Turn on Location
Services
Press and hold power button until green light
ashes then release.
Press and hold power button to turn device off.
3
Wait for the app to discover your FitCheck®device.
*On Windows, device needs rstly to be paired to the PC via Bluetooth®.
Connect to your device
Waiting for FC61xx device
***
Discovered Devices:
Under users select “Choose User” and select the
user or add new user.
06-11-201914.28:04
Users
Future Technology
CHOOSE USER
Fit Check PASS
RESULT
To see the list of results press the ‘Reports’ icon
on the foot of the app.
To share or download your results locate the
relevent icon below the reports and share or
download.
View and download results
7
A positive pull t check traceline shows a single
large uctuation, followed by a gently increasing line
before rising again at the end of the t check upon
releasing breath.
Passed fit check
06-11-2019 14.28:04
Users
Future Technology
CHOOSE USER
RESULT
06-11-2019 14.28:04
Users
Future Technology
CHOOSE USER
RESULT
06-11-2019 14.28:04
Users
Future Technology
CHOOSE USER
RESULT
06-11-2019 14.28:04
Users
Future Technology
CHOOSE USER
RESULT
06-11-2019 14.28:04
Users
Future Technology
CHOOSE USER
RESULT
06-11-2019 14.28:04
Users
Future Technology
CHOOSE USER
RESULT
06-11-2019 14.28:04
Users
Future Technology
CHOOSE USER
RESULT
06-11-2019 14.28:04
Users
Future Technology
CHOOSE USER
RESULT
A
A negative pull t check trace line shows
large uctuations or drops rapidly when
there is a leaky or damaged seal or a poorly
tted mask.
Damaged or leaking seal
B