FitLinxx Pebble User manual

Pebble™
Getting Started Guide

2
This Getting Started Guide covers the following information:
1. Pebble Display
2. Wearing the Pebble
3. Pebble Battery
4. Syncing Pebble Data
5. Using the ActiLink
6. Using the ActiScale
7. Using the ActiPressure

3
Pebble Display
To show daily progress anytime
1. Device status 2. Activity status 3. Sync status
Quickly tap
device 5 times
6 lights = 50% of
daily goal achieved
1 light = minimal
progress toward
daily goal
Shows daily progress,
for example:
Pulsing = at least
5 minutes of
data stored
Solid = recent
successful
data sync
Sequence of
lights = working
properly

4
Wearing the Pebble
All-day activity and walking Running, elliptical, and biking
Good accuracy - clip
on belt/waistband,
pocket or bra
Best accuracy - clip
at on top of shoes
Note: Pebble must be secure

5
Pebble Battery
Replacing the battery
Pebble includes CR2032 battery
An extra battery is included
for convenience
Turn clip
counterclockwise
Insert new battery
under tab
Replace
battery door
Turn clockwise
Remove
battery door
Use tool or device clip
to remove old battery
Wait 60 seconds
Red lights = less than 2 weeks
of battery life remaining
1.
4.
2.
5.
3.
CR 2032
+
CR 2032
+
CR 2032
+
CR 2032
+
CR 2032
+

6
Syncing Pebble Data
The Pebble will sync data with your website when it is “awake”
and near a wireless access point
Tap device 5 times near an access point
Walk near an access point
OR
Wght
BP
BP
Wght
BP
BP
To wake the Pebble and sync activity data

7
Wght
BP
BP
Wght
BP
BP
Using the ActiLink
Insert ActiLink Download and
install software
ActiLink status
Working
properly
No Internet
connection
No ActiLink
detected
1.
3.
2.
Wght
BP
BP
100%

8
Using the ActiScale
Place on at, hard
surface up to 50
feet from ActiLink
Stand on scale until
weight is displayed
Weight wirelessly
sent to computer
Tap the scale
Wait for “0.0”
1.
3.
2.
4.
Wght
BP
BP
Wght
BP
BP
175 lbs.

9
120
80
60
Wght
BP
BP
Wght
BP
BP
Using the ActiPressure
Place on at surface up
to 50 feet from ActiLink
Follow ActiPressure instructions
to take blood pressure
Blood pressure wirelessly sent
to computer
1. 2.
S: 120
D: 80
P: 60

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including interference that may cause undesired operations. Changes or
modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the devices.
Industry Canada Notice to users: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de licence. L‘exploitation est autorisée aux deux
conditions suivantes: (1) l‘appareil ne doit pas produire de brouillage, et (2) l‘utilisateur de l‘appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d‘en compromettre le fonctionnement.
European Wireless EU Declaration of Conformity: This wireless device complies with the specications EN 300 440-2, EN 301-489, and EN 60950
following the provisions of the R&TTE Directive.
Patent information can be found at http://www.tlinxx.net/patents.htm. Specications subject to change without notice.
Warning: Risk of explosion if battery is replaced by an incorrect type. Please dispose of used batteries in accordance with your local environmental
laws and guidelines.
© 2012 FitLinxx. All rights reserved. FitLinxx, the Fitlinxx logo, and Pebble are trademarks of FitLinxx, Inc.
v1.9
For more information regarding use, care, or servicing, please contact:
Use of this product is subject to the FitLinxx End User License Agreement (EULA): http://www.tlinxx.net/terms.htm