Fitnex XT5 User manual

XT5
16
NOTE:
1.During workout, user can adjust workout speed and elevation by
pressing “ ” of speed and elevation.
2. During workout, if user presses “ ”, speed will
decrease to 0 and elevation will be stayed at the level which user
workouts. If user re-start exercising, workout program will keep
moving, but speed will decrease to 0.5MPH/0.8KPH. After
pressing “ ”, no button is pressed in 5 minutes, the
treadmill will back to standby mode.
3. During workout, user can press and hold “ ” for 3
seconds, the treadmill will back to standby mode.
ERROR CODE
E1: No speed signal.
E6: Incline operation error.
E7: Decrease or Increase of incline motor beyond mechanism safety range.

XT5
17
TEST MODE
Press “ ” and “ ” together and
hold for 3 seconds until the console flashes.
Press “ ” to test all LED.
Press “ ” to test again or press “ ”
and “ ” and hold for 3 seconds to back
to standby mode.
Press “ ” to test all buttons. (If button function
is good, when press, user will hear a beep voice and
see a number on the window.)
Press “ ” to test I/O mode.
Step 4
Step 7
Step 6
Step 5
Step 1
Step 2
Step 3
START
ENTER
START
ENTER
Press “ ” to test LED.
Press “ ” to test LED.
MODE
MODE
MODE
MODE
MODE
MODE

T60
18

ENTER:
Accept entry of variable setting.
SPEED:
Increase / Decrease the tread belt speed.
SELECT:
Select an exercise program. Use to scan the
Time / Calories / Distance / Heart Rate during
workout.
ELEVATION:
Increase / Decrease the elevation of treadmill.
START:
Begins workout.
SAFETY STOP:
Pulling the safety magnet stops the treadmill
immediately.
T60
19

PAUSE/RESET:
Press PAUSE for temporary stop which holds the
time and distance. Press START to continue. To
reset the treadmill hold the PAUSE down for 3
seconds.
Select speed from 1 to 10 MPH.
MPH
MPH
MPH
MPH MPH MPH MPH
MPH
MPH
MPH
If the current speed is higher than 5 MPH
(8KMH), speed returns to 0 in 3 minutes.
If the current speed is between 1.6~5 MPH
(2.56~8KMH), speed returns to 0 in 2 minutes.
If the current speed is lower than 1.6 MPH,
(2.56KMH) speed returns to 0 in 18 seconds.
COOL DOWN:
Press COOL DOWN, elevation returns to 0%.
T60
20
Fitnex/Fitness Master Inc., cannot guarantee that the heart rate
measurement system on any Fitnex product will work for all users in
all instances. The accuracy of heart rate measurement will vary based
on a number of factors, for example the user's physiology and age. Plus
external interference and other factors may influence heart rate
acquisition and processing.
SPEED BUTTONS:

T60
21
Manual
Turn on the power and put the safety key on.
Set weight. You can use “ ” and “ ” to
adjust your weight, then press “ ”.
Press “ ” to start your workout.

T60
22
If you choose “Set Time”, you can use “ ” and
“ ” to adjust the time you want to exercise.
If you choose “Set Calories”, you can use “ ” and
“ ” to adjust the calories you want to exercise.
If you choose “Set Distance”, you can use “ ” and
“ ” to adjust the distance you want to exercise.
After adjusting, please press “ ”.
Set Time/Set Calories/Set Distance
Step 4
Step 5 Press “ ” to start your workout.
Turn on the power and put the safety key on.
Set weight. You can use “ ” and “ ” to
adjust your weight, then press “ ”.
Press “ ” to choose one of these three programs,
then press “ ”.

T60
23
Custom 1/ Custom2
Turn on the power and put the safety key on.
Set weight. You can use “ ” and “ ” to
adjust your weight, then press “ ”.
Press “ ” to choose one of these two programs,
then press “ ”.
Note:
Default speed and incline are set. During workout, you can change speed
and incline. When you finish each segment’s workout, new speed and
incline values will be set. Next time when you choose CUSTOM 1/
CUSTOM 2, you can run with your new settings.
Please notice, you must finish each segment’s workout, then new values
will just be set.

T60
24
Walking Course/ Running Course
Turn on the power and put the safety key on.
Set weight. You can use “ ” and “ ” to
adjust your weight, then press “ ”.
Press “ ” to choose one of these two programs,
then press “ ”.
Step 4
Step 1
Step 2
Step 3
Step 5
Step 6
Press “ ” when you see TIM on the matrix window.
Use “ ” and “ ” to adjust the time you want
to exercise.
Press “ ” to start your workout.