Flat Vision Products IPM-15 User manual

Flat Vision Products Ltd
User Manual for
IPPM-15
Flat Vision Products Ltd
www.flatvision.co.uk

1. Table of Content
1. Table of Content
2. Introduction
2.1Overview Page.2
2. 2 Features Page.2
2. 3 Product package Page.2
2. 4 Important safety Instructions Page.3
2. 5 StructureDiagram Page.4
2. 6 DimensionDiagram Page.5
3. Using the System
3. 1 Power LED Indicator Page.6
3. 2 OSD Control key Page.6
3.3 LCD OSD Menu Operation
4. Installing the Driver
4.1 Hardware Page.10
4.2 Software Page.10
4.3 Control Panel (Elo Mouse Properties) Page.14
4.4 Video Alignment (Calibration) Page.20
4.5 Tool Tray Page.21
4.6 Elo Right Mouse Button Tool (RMBT) Page.23
Page.7
Page.1

2. Introduction
2. 1 Overview
IPM-15 is a monitor with built in LCD OSD to provide effective assistant for an
administrator to control PC system.
IPM provides cost effective for your limited IT budget over using CRT and
rack mounting. Also, it will be space saving for your compact environment rack.
2. 2 Features
● High contrast color TFT LCD display support resolution up to 1024 x 768
● Advanced OSD control for picture quality adjustment for Front panel OSD Control
● Input signal: VGA , DVI, AV IN ( optional )
● Construction: Aluminium chassis with VESA 75/ 100mm standard screw holes
● Optional: Rack mount;Swivel ARM, Desk Stand
● Construction: Aluminium bezel with touch screen
● Power Supply: External 48W DC 12V power adapter
● Touch screen ( optional )
● Internal7V~28V DC-DC Module ( optional )
● OS Support: MS DOS, Windows 98/SE, Windows NT4.0, Windows 2000, Windows XP
2. 3 Product package
Open the shipping carton and check the contents. If any items are missing or damaged,
contact your dealer immediately. The package should include the following items
Accessory Box:
1. VGA cable x 1 2. DVI cable x 1 3. AUDIO cable x 1
4. Screw X 4 5.. User’s manual x 1 6. AC adapter x 1
7. Power cord x 1 8. AV Cable x 1 ( AV Version Only)

2. 4 Important safety Instructions
Please read the following instructions carefully. This manual should be retained for
future use.
● Unplug the monitor from the power source when you clean the monitor. Don’t use liquid
cleaners or aerosol cleaners. Use soft cloth only, If it’s not available, please consult
hardware retailer for cleaning information.
● Do not place you monitor near a window. Exposing the Monitor to rain, water, moisture
or sunlight may severely damage the display.
● Do not apply pressure to the monitor. Excessive pressure may Cause permanent
damage to the display.
● Avoid dropping and strong impact.
● Do not remove the cover or attempt to repair this unit by yourself, as the warranty may
be void Servicing of any nature should be Performed only by an authorized technician.
● Safe storage of the LCD Product is in the range of -4˚F to 140˚F（-20˚C TO +60˚C）.
Storing you LCD Product beyond this range may result in permanent damage.
● Do not overload electrical outlets or extension cords as this can result in fir or electric
shock.
● Do not use or store in dusty, dirty areas
● If any of the following occurs , immediately unplug your power cord and Call an
technician. Authorized.
a.) The power cord is frayed or damaged.
b.) Liquid has been spilled onto the LCD Screen, or it has been exposed to rain.
c.) The LCD monitor has been dropped or the case has been damaged.

2. 5 Structure Diagram
TFT-LCD
OSD
Rack mount hole
VESA 75/100mm
TouchScreen COM Port
DC-DC Module DC Version Only
DC jack
TouchScreen USB Port
Audio in
VGA in
DVI in

2. 6 Dimension Diagram
IPM-15-FV

3Using the System
3. operation
OSD Control Panel
3.1 Power LED Indicator
When the monitor is working, the power LED is green.
3.2 OSD Control key
3.2.2 Menu Key
Press the Menu key to activate the on screen display. It is a toggle key. After 30 sec
idle time, the OSD screen will automatically turn off. Press twice to turn on Confirmation
key, which will bring up the menu and complete the confirmation function
3.2.3 ▲Key
This button has multiple functions including navigating up or volume up that
can be set to select function in the menu. The adjustment value can be set
directly by pressing “▲”.
3.2.4 ▼Key
This button has multiple functions including navigating down or volume down that can
be set to select function the menu. The adjustment value can be set directly by pressing
“▼”.
3.2.5 AUTO Key
press the aut0 key to adjust screen color and position.
3.2.6 DVI/VGA Key
press the DVI/VGA key to select desired display input signal. Select video signal
have DVI.VGA.
Switch key3.2.1
press the power switch key to turn ON or OFF monitor power, NOT a system power
switch.

3.3 LCD OSD Menu Operation
Main Menu
Color
Image
OSD
Source
Exit
Color
Auto color: Set favorite color of red, green, and blue
Contrast: It can be adjust image get distinct or vague
Brightness: It can be adjust image get dark or bright
Color Temp: Set color to 9300,6500,5500, User
Exit: Go back MENU

Image
Auto Adjust: To perform automatic optimisations of all functions
An “Adjusting “message is displayed during the process
H. Position: It can be moved to left or right side of image
V. Position: It can be adjust image get dark or bright
Clock: Adjust frequency to fill display
Phase: Adjust remove noise and sharpen the image
Sharpness: To mark the image become soft
Exit: Go back MENU
OSD
OSD H. Position: It can be moved to left or right side of OSD
OSD V. Position: It can be moved to up or down side of OSD
OSD Time: It can adjust OSD display time
Reset: Recall Default value
Language: English, simplified Chinese, traditional Chinese, Francais,
Espanol, Japanese, Deutsch,
Factory mode: You can push MENU key & POWER key at same time when
VGA signal input, to entry factory mode. The mode can set
the red, green and blue color of ADC chip. Push the MENU
key for exit.
Exit: Go back MENU

Source
D-SUB: connect VGA PC
DVI: connect DVI PC
Exit
Exit: Go back MENU