Flavel FDW64 Installation instructions






FDW64






Explanation of symbols
Throughout ths User Manual the followng symbols are used:
C
Important nformaton or useful
hnts about usage.
A
Warnng for hazardous stuatons
wth regard to lfe and property.
B
Warnng for electrc shock.
Packagng materals of the
product are manufactured
from recyclable materals n
accordance wth our Natonal
Envronment Regulatons.
Do not dspose of the packagng materals together wth the domestc or other wastes.
Take them to the packagng materal collecton ponts desgnated by the local authortes.
Please read these instructions first before using your appliance
Thank you for choosng a Lesure applance.
Please take some tme to read ths user manual before usng your applance, to ensure
you know how to safely operate the controls and functons.
Carefully follow all unpackng and nstallaton nstructons to ensure the applance s
correctly connected and ftted pror to use.
Please wrte your product model and seral number on the last page of ths user manual,
and store n a safe locaton close to the applance for easy future reference.
Ths user manual may also be applcable for several other models. Dfferences between
models wll be lsted.
If you have any questons or concerns, please call our contact centre or fnd help and
nformaton onlne at www.lesurecooker.co.uk
This product was manufactured using the latest technology in environmentally friendly conditions.

CONTENTS
1 INSTRUCTIONS FOR SAFETY
AND ENVIRONMENT 4
General safety .......................................4
Intended use..........................................4
Children’s safety....................................5
Disposing of packaging material ........5
Transportation of the product............5
Compliance with WEEE Directive and
Disposing of the Waste Product.........6
Compliance with RoHS Directive ........6
Package information ............................6
2 DISHWASHER 7
Overview ................................................7
Fan drying system.................................8
Technical specications.......................8
3 INSTALLATION 9
Appropriate installation location .......9
Connecting water supply.....................9
Connection to the drain .................... 10
Adjusting the feet.............................. 10
Electrical connection......................... 10
This appliance must be earthed.......11
Fitting a dierent plug.......................11
Initial use..............................................11
4 PREPARATION 12
Tips for energy saving........................12
Water softening system ....................12
Adjusting the water softening
system ..................................................13
Adding salt ...........................................14
Detergent.............................................15
Tablet detergents ...............................16
Rinse aid ...............................................17
Items not suitable for washing in the
dishwasher...........................................17
Placing the dishes into the
dishwasher.......................................... 18
Cutlery basket .................................... 20
Upper basket height adjustable
rack....................................................... 20
Upper basket multipurpose service
rack....................................................... 20
5 OPERATING THE PRODUCT21
On/O key ........................................... 22
Programme Selection / Programme
Cancel key............................................ 22
Function Keys ..................................... 22
Preparing the machine...................... 22
Programme selection........................ 22
Auxiliary functions ............................ 24
Programming the washing time...... 25
Starting the programme................... 26
Cancelling the programme ............... 26
Salt Indicator ( )............................. 26
Rinse Aid Indicator ( )..................... 26
Adjusting the amount of rinse aid....27
End of programme ..............................27
Water Cut-o Warning .......................27
Overowing Warning .........................27
6 MAINTENANCE AND
CLEANING 28
Cleaning the outer surface of the
product ................................................ 28
Cleaning the interior of the machine28
Cleaning the lters ............................ 28
Cleaning the hose lter..................... 29
Cleaning the impellers ...................... 30
Lower impeller.................................... 30
Upper impeller ................................... 30
7 TROUBLESHOOTING 31
8 GUARANTEE DETAILS 36
What is covered by this guarantee? 36
What is not covered? ......................... 36
Important Notes .................................37
Does Flavel oer replacements?..... 38
When will the repair take place? ..... 38

4
/
/38 EN
Instructions for safety and envIronment
1
Ths secton contans safety
nstructons that wll help to gve
protecton from rsk of personal
njury or property damage. Falure
to follow these nstructons shall
vod all warrantes.
General safety
•Never place the product
on a carpet-covered floor;
otherwse, lack of arflow
beneath the product wll
cause electrcal parts to
overheat. Ths wll cause
problems wth your product.
•Do not operate the product
f the power cable / plug s
damaged! Call the Authorsed
Servce Agent.
•Connect the product to a
grounded outlet protected
by a fuse complyng wth
the values n the “Techncal
specfcatons” table. Do
not neglect to have the
groundng nstallaton made
by a qualfed electrcan.
Our company shall not be
lable for any damages that
wll arse when the product
s used wthout groundng
n accordance wth the local
regulatons.
•The water supply and
dranng hoses must be
securely fastened and reman
undamaged.
•Unplug the product when not
n use.
•Never wash the product by
spreadng or pourng water
onto t! There s the rsk of
electrc shock!
•Never touch the plug wth
wet hands! Never unplug by
pullng on the cable, always
pull out by grabbng the plug.
•The product must be
unplugged durng nstallaton,
mantenance, cleanng and
reparng procedures.
•Always have the repar
procedures carred out by the
Authorsed Servce Agent.
Manufacturer shall not be
held lable for damages that
may arse from procedures
carred out by unauthorsed
persons.
•Never use chemcal solvents
n the product. They brng
forth the rsk of exploson.
•When you pull the upper and
lower baskets out completely,
the door of the product wll
bear all the weght of the
baskets. Do not put other
loads on the door; otherwse,
the product may tlt.
•Never leave the door of
the product open apart
from loadng and unloadng
procedures.
•Do not to open the door of
the product when t s runnng
unless necessary. Be careful
for the rush of hot steam
when you need to open the
door.
Intended use
•Ths product has been
desgned for domestc use.
•It must be used to do the
domestc type dshes only.

/
5 / 38
EN
Instructions for safety and envIronment
•Ths applance s ntended
to be used n household and
smlar applcatons such as:
- Staff ktchen areas n shops,
offces and other workng
envronments.
•Only dshwasher safe
detergents, rnse ads and
addtves must be used.
•The manufacturer waves
any responsblty arsen
from ncorrect usage or
transportaton.
•Ths applance can be used
by chldren aged from 8 years
and above and persons wth
reduced physcal,sensory
or mental capabltes or
lack of experence and
knowledge f they have
been gven supervson or
nstructon concernng use
of the applance n a safe
way and understand the
hazards nvolved. Chldren
shall not play wth the
applance. Cleanng and user
mantenance shall not be
made by chldren wthout
supervson.
Children’s safety
•Electrcal products are
dangerous for the chldren.
Keep chldren away from the
product when t s n use. Do
not let them to tamper wth
the product.
•Do not forget to close the
door of the product when
leavng the room where t s
located.
•Store all detergents and
addtves n a safe place away
from the reach of the chldren.
Disposing of packaging
material
Packagng materals are
dangerous to chldren. Keep
packagng materals n a safe
place away from reach of the
chldren.
Packagng materals of the
product are manufactured from
recyclable materals. Dspose
of them properly and sort n
accordance wth recycled waste
nstructons. Do not dspose
of them wth normal domestc
waste.
Transportation of the
product
A
If you need to move the
product, do t n uprght
poston and hold from
the rear sde. Tltng the
product onto ts front
sde may cause the
electronc parts n t get
wet and damaged.
1. Unplug the product before
transportng t.
2. Remove water dranage and
water supply connectons.
3. Dran the remanng water n
the product completely.

6
/
/38 EN
Instructions for safety and envIronment
Compliance with WEEE
Directive and Disposing
of the Waste Product
Ths product comples wth
EU WEEE Drectve
(2012/19/EU). Ths product
bears a classfcaton symbol
for waste electrcal and electronc
equpment (WEEE).Ths product
has been manufactured wth hgh
qualty parts and materals whch
can be reused and are sutable for
recyclng. Do not dspose of the
waste product wth normal
domestc and other wastes at the
end of ts servce lfe. Take t to the
collecton center for the recyclng
of electrcal and electronc
equpment. Please consult your
local authortes to learn about
these collecton centers.
Compliance with RoHS
Directive
The product you have purchased
comples wth EU RoHS Drectve
(2011/65/EU). It does not contan
harmful and prohbted materals
specfed n the Drectve.
Package information
Packagng materals of the product
are manufactured from recyclable
materals n accordance wth our
Natonal Envronment Regulatons.
Do not dspose of the packagng
materals together wth the
domestc or other wastes. Take
them to the packagng materal
collecton ponts desgnated by
the local authortes.

/
7 / 38
EN
Dishwasher
2
Overview
1. Upper basket
2. Upper mpeller
3. Lower mpeller
4. Slverware basket
5. Door
6. Ratng Label
7. Control panel
8. Detergent dspenser
9. Lower basket
10. Flters
11. Salt reservor ld
12. Upper basket ral
13. Upper cutlery basket (depends on model)
14. Tabletop (depends on model)
15. Fan dryng system (depends on model)
15

8
/
/38 EN
Dishwasher
Technical specications
Compliance to standards and test data / EC declaration of conformity
Ths product comples wth the followng EU drectves;
Development, producton and sales stages of ths product comply wth the safety
rules ncluded n all pertanng European Communty regulatons.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power nput 220-240 V, 50 Hz (see ratng label)
Total power consumpton 1800-2100 W (see ratng label)
Heater power consumpton 1800 W (see ratng label)
Total current (depends on the model) 10 A (see ratng label)
Dran pump power consumpton 30 W (see ratng label)
Water pressure 0.3 –10 bar (= 3 – 100 N/cm = 0.01-1.0
Mpa)
C
Techncal specfcatons may be changed wthout pror notce to mprove the
qualty of the product.
C
Fgures n ths manual are schematc and may not match the product exactly.
C
Values stated on the markngs of the product or n the prnted documents
accompanyng the product are obtaned n the laboratory on bass of the relevant
standards. Dependng on operatonal and envronmental condtons of the
product, these values may vary.
Note for test institutions:
Data requred for performance tests shall be provded upon request. Requests can be
e-maled to the followng address:
dishw[email protected]om
Do not forget to provde the code, stock and seral numbers of the product to be tested n
your request e-mal along wth your contact nformaton. Code, stock and seral numbers of
the product may be found on the type label attached to the sde wall of the door.
Fan drying system
Fan dryng system ensures effcent dryng of your dshes.
It s normal to hear a dfferent sound than that of washng cycle durng fan operaton.

/
9 / 38
EN
3Installation
To make the product ready for use, make
sure that the electrcty, tap water supply
and water dranage systems are approprate
before callng the Authorsed Servce Agent.
If they are not, call a qualfed techncan
and plumber to have any necessary
arrangements carred out.
C
Preparaton of the locaton
and electrcal, tap water and
waste water nstallatons at the
place of nstallaton s under
customer's responsblty.
B
Manufacturer shall not be held
responsble for damages arsng
from processes carred out by
unauthorsed persons.
A
Pror to nstallaton, vsually
check f the product has any
defects on t. If so, do not have
t nstalled. Damaged products
cause rsks for your safety.
C
Make sure that the water nlet
and dscharge hoses are not
folded, pnched or crushed
whle pushng the product nto
ts place after nstallaton or
cleanng procedures.
When placng the product, pay attenton not
to damage the floor, walls, ppng, etc. Do
not hold the product from ts door or panel
to move t.
Appropriate installation
location
•Place the product on a sold and flat
floor that has suffcent load carryng
capacty! The product must be nstalled
on a flat surface n order for the door to
be closed comfortably and securely.
•Do not nstall the product at places
where temperature may fall below 0ºC.
•Place the product on a rgd floor. Do
not place t on a long ple rug or smlar
surfaces.
B
Ensure the power cable does
not get trapped under the
product.
•Make sure that you select a locaton
that wll allow you to load and unload
the dshes n a fast and comfortable
manner.
•Install the product n a place close
to the tap and the dran. Select the
nstallaton locaton by consderng
that t wll not be changed after the
connectons are made.
Connecting water supply
•Do not use old or used water nlet
hose on the new product. Use the new
water nlet hose suppled wth the
product.
•Connect the water nlet hose drectly
to the cold water tap. Permtted water
temperature up to 25°C. Pressure
comng from the tap should be
mnmum 0.3 and maxmum 10 bars. If
the water pressure exceeds 10 bars, a
pressure relef valve should be nstalled
n between.
•Open the tap completely after makng
the connectons to check for water
leaks.
A
For your safety, close the water
nlet tap completely after the
washng programme s over.

10
/
/38 EN
Installation
Connection to the drain
Water dscharge hose can drectly be
connected to the dran hole or snk’s
dranage. The length of ths connecton
must be mn. 50 cm and max. 100 cm from
the floor. A dscharge hose longer than 4
meters wll cause washng performance
to be affected.Attach the water dscharge
hose to the dranppe wthout bendng t.
Tghtly fx the water dscharge hose to the
dranppe n order to prevent any dslocaton
of the water dscharge hose durng
operaton of the product.
min 300
min 120
max 1000
min 500
C
Dranppe must be connected
to the foul water system and t
should not be connected to any
surface water dran.
Adjusting the feet
If the door of the product cannot be closed
properly or f the product wobbles when you
push t slghtly, then you need to adjust the
feet of the product. Adjust the feet of the
product as llustrated n the relevant secton.
A
Dswashers door must be
algned properly otherwse hot
steam can escape! Danger of
serous burns, other njury or
may damage furnture.
Electrical connection
Before you nsert the plug nto the wall
socket make sure that the voltage and
the frequency shown n the ratng label
corresponds to your electrcty supply.
We recommend that ths applance be
connected to the mans supply va a sutable
swtched and fused socket n a readly
accessble poston.
If the supply cord or the mans lead s
damaged please do not replace t yourself.
The supply cord or the mans lead must be
replaced by a Authorsed Servce Agent or a
smlarly qualfed person.

/
11 / 38
EN
Installation







Wth the alternatve plugs a 13A fuse must
be ftted ether n the plug or adaptor or
n the man fuse box. If n doubt contact a
qualfed electrcan.
Initial use
Before startng to use the product, make
sure that all preparatons are made n
accordance wth the nstructons n sectons
“Important safety nstructons” and
“Installaton”.
•Before usng the product, fll the salt
reservor wth 1 ltre of water, add salt
(see next page) and str to dssolve.
Run the Dshwasher wthout dshes
on a short programme wth a small
amount of detergent.
A
There mght be a small amount
of water left n the product after
factory qualty control tests. Ths
causes no harm to the product.
AThis appliance must
be earthed
If the ftted moulded plug s not
sutable for your socket, then
the plug should be cut off and
an approprate plug ftted.
Destroy the old plug, whch s
cut off as a plug wth a bared
cord could cause a shock
hazard f nserted nto a socket
elsewhere n the house.
The moulded plug on ths
applance ncorporates a 13A
fuse. Should the fuse need to
be replaced an ASTA approved
BS1362 fuse of the same ratng
must be used. Do not forget
to reft the fuse cover. In the
event of losng the fuse cover,
the plug must not be used
untl a replacement fuse cover
has been ftted. Colour of the
replacement fuse cover must be
the same colour as that vsble
on the pn face of the plug. Fuse
covers are avalable from any
good electrcal store.
Fitting a dierent plug
As the colours of the wres n the mans
lead of ths applance may not correspond
wth the coloured markngs dentfyng the
termnals on your plug, proceed as follows:
1. Connect the green - yellow or green
(earth) wre to the termnal n the plug
marked ‘E’ or wth the symbol or
coloured green and yellow or green.
2. Connect the blue (neutral) wre to
the termnal n the plug marked ‘N’ or
coloured black.
3. Connect the brown (lve) wre to the
termnal n the plug marked ‘L’ or
coloured red.

12
/
/38 EN
Preparation
4
Tips for energy saving
Followng nformaton wll help you use
the product n an ecologcal and energy-
effcent manner.
Wpe away any coarse food remnants on the
dshes before puttng them n the product.
Operate the product after fllng t
completely.
When selectng a programme, consder
the table of "Programme data and average
consumpton values".
Do not put more detergent than suggested
on the detergent package.
Water softening system
The product s equpped wth a water
softenng system whch reduces the
hardness of ncomng water. Ths system
softens the supply water to a level that wll
allow washng the dshes wth the requred
qualty.
C
The mans water hardness must
be softened f t s over 7°dH.
Otherwse, hardness ons wll
accumulate on the dshes that
are washed and may affect the
washng, rnsng and dryng
performances of the machne.

/
13 / 38
EN
Preparation
Adjusting the water softening system
Cleanng, rnsng and dryng performance of your dshwasher wll ncrease when water
softenng system s adjusted properly.
Adjust the new water hardness level accordng to the Water hardness level nstructon n ths
booklet.
Use the test strp suppled wth the product accordng to the steps gven below to determne
hardness level of your supply water.
Remove the test
strip from the
packet.
Turn on the tap and
let the water run for
about a minute.
Hold the test strip in
the water for about
a second.
Remove the test
strip from the water
and shake it.
Wait for 1 minute. The test strip shows
you the hardness
level.
After determnng hardness level of the supply water:
1. After turnng on your machne, press and hold the Tme Delay and Start / Pause / Cancel
keys respectvely.
2. Usng the Tme Delay key, turn on 9 and 3 LEDs.
3. Use the programme keys to adjust the water hardness level.
4. Press On / Off key to save the settng.
Water hardness level adjustment table
Hardness Level English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF Water Hardness Level Indicator
Level 0 0-5 0-4 0-8 Press the 1st programme key to set the water hardness
setting to position 1.
Level 1 6-9 5-7 9-13
Level 2 10-15 8-12 14-22 Press the 2nd programme key to set the water hardness
setting to position 2.
Level 3 16-19 13-15 23-27 Press the 3rd programme key to set the water hardness
setting to position 3.
Level 4 20-24 16-19 28-34 Press the 4th programme key to set the water hardness
setting to position 4.
Level 5 25-62 20-50 35-90 Press the 5th programme key to set the water hardness
setting to position 5.
If the hardness level of the supply water s above 90 °dF or f you are usng well water, then t
s recommended to use water purfcaton devces and specal flters.
If the hardness level of the supply water s below 13°dF, there s no need to use salt n your
dshwasher. If ths s the case, “No Salt Warnng Indcator” (f any) llumnates contnuously on
the panel of your machne.
If the water hardness level adjustment s set to level 1, the “No salt warnng ndcator” wll
llumnate contnuously although t s not necessary to use salt. If you use salt under ths
condton, salt wll not be consumed and the Salt ndcator wll not llumnate.

14
/
/38 EN
Preparation
3. Add 1 ltre of water to salt reservor of
your machne only n ntal use.
4. Fll the salt reservor wth salt by
usng the salt funnel (D). To speed up
dssoluton rate of salt n water, str t
wth a spoon.
C
You can put about 2 kg of
softenng salt nto the salt
reservor.
5. Replace the ld and tghten t when the
reservor s full.
C
You need to add salt rght before
startng the machne. Thus, the
overflowng salty water wll be
flushed mmedately, preventng
the rsk of corroson n machne.
In cases where you would not
start washng mmedately,
run your machne empty n the
shortest program.
Adding salt
Water softenng system needs to be
regenerated n order for the product
operates wth the same performance
contnuously. Dshwasher salt s used for
ths purpose.
C
Use only specal softenng salts
produced partcularly for the
dshwashers n your machne.
C
It s recommended to use
granule- or powder-formed
softenng salts n the water
softenng system. Do not use
salts that do not completely
dssolve n water such as table
salt or rock salt. Otherwse the
performance of the system may
deterorate n tme.
C
Salt reservor wll be flled
wth water when you start
the product. For ths reason,
add salt before operatng the
machne.
1. Frstly, take the lower basket out to add
softenng salt.
2. Turn the salt reservor ld counter-
clockwse to open t (A).
C
If you move your house, t s
necessary to readjust water
hardness level of your machne
by consderng the nformaton
gven above accordng to the
hardness level of the supply
water n your new locaton.
Your machne wll dsplay the
most recently adjusted water
hardness level.

/
15 / 38
EN
Preparation
C
Snce dfferent salt brands n the
market have dfferent partcle
szes and snce the water
hardness may vary, dssoluton
of the salt n water may take
a couple of hours. Therefore,
Salt Indcator remans on for a
whle after addng salt nto the
machne.
Detergent
You can use powder, lqud/gel or tablet
detergents n the machne.
A
Only use n the machne
the detergents produced
partcularly for use wth
dshwashers. We recommend
you not use detergents that
contan chlorne and phosphate
as they are harmful for the
envronment.
Adding detergent
C
Pay attenton to the warnngs
on the detergent packagng
to get better washng and
dryng results. Contact the
manufacturer of the detergent
for further questons.
A
Do not put solvents nto the
detergent dspenser. There s
the rsk of exploson!
Put the detergent nto the detergent
dspenser just before operatng the machne
as llustrated below.
1. Push the latch to rght to open the
detergent dspenser ld (A).
2. Put suggested amount of powder,
lqud/gel or tablet detergent n the
reservor.
C
Insde the detergent dspenser
there are level markngs that
help you use approprate
amount of powder detergent.
When brmful, detergent
dspenser wll contan 45 cm of
detergent. Fll detergent up to 15
cm or 25 cm level marks n the
detergent dspenser accordng
to fullness of the machne and/
or solng degree of the dshes.
One tablet s enough f you are
usng detergent tablets.
3. Push the ld of the detergent dspenser
to close t. A "clck" wll be heard when
the ld s closed.

16
/
/38 EN
Preparation
C
The best washng performance
n dshwashers s obtaned by
usng detergent, rnse ad and
water softenng salt ndvdually.
C
Observe the nstructons of the
detergent manufacturer on
the package when usng tablet
detergents.
C
Contact the detergent
manufacturer f your dshes
are wet and/or f you notce
lmescale spots partcularly on
your glasses after the washng
programme s over when usng a
tablet detergent.
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rnse ad
reservors are full.
2. Set the water hardness to the hghest
level and perform an empty run.
3. After the empty washng cycle, revew
the user manual and readjust the water
hardness level so as to sut the water
supply.
4. Make the approprate rnse ad settngs.
1
2
3
C
Use powder or lqud/gel
detergent n short programmes
wthout prewash snce the
solublty of the tablet detergent
changes dependng on the
temperature and tme.
Tablet detergents
In addton to the conventonal tablet
detergents, there are also commercally
avalable detergent tablets that show water
softenng salt and/or rnse ad effect. Some
types of these detergents contan specal-
purpose components such as glass and
stanless steel protectors. These tablets
show ther effects up to a certan water
hardness level (21°dH). Water softenng salt
and rnse ad must also be used together
wth the detergent f the water hardness
level s above the mentoned level.

/
17 / 38
EN
Preparation
4. If there are stans on tableware tems
after washng, level must be ncreased
and f there s a blue trace after wpng
them by hand, t must be decreased.
Ths s set to poston 3 as factory
default.
C
The rnse ad adjustment s
descrbed under "Adjustng
the amount of rnse ad" n
the secton for operatng the
machne.
C
Wpe clean any splled rnse ad
outsde the reservor. Rnse
ad that splled accdentally
wll cause foamng and t wll
eventually decrease washng
performance.
Items not suitable for
washing in the dishwasher
•Never wash dshes soled by cgarette
ash, candle remnants, polsh, dyestuff,
chemcals, etc. n your dshwasher.
•Do not wash slverware and cutlery
wth wooden or bone stems, glued
peces, or peces that are not resstant
to heat, as well as copper and tn-
plated contaners n the dshwasher.
C
Decoratve prnts of chnaware
as well as alumnum and slver
tems may get dscoloured or
tarnshed after washng n the
dshwasher just as t happens
n handwashng as well. Some
delcate glass types and crystals
may become dull n tme. We
strongly recommend you to
check f the tableware you are
gong to purchase s sutable
for washng especally n the
dshwasher.
Rinse aid
C
The rnse ad used n
dshwashers s a specal
combnaton that ams to
ncrease dryng effcency and
prevent water or lme stans
on the washed tems. For ths
reason, care must be pad
to have rnse ad n the rnse
ad reservor and to use rnse
ads produced specally for
dshwashers only.
1. Open the ld of the rnse ad reservor
wth the help of the latch.
2. Fll the reservor untl “MAX” level.
3. Slghtly press the pont (B) of the
reservor ld to close t.

18
/
/38 EN
Preparation
Placing the dishes into the
dishwasher
You can use your dshwasher n the
optmum way wth respect to energy
consumpton and washng and dryng
performance only f you place the dshes n
an orderly way.
•Wpe away any coarse food remnants
(bones, seeds, etc.) on the dshes
before placng them n the dshwasher.
•Place thn, narrow peces n the mddle
sectons of baskets f possble.
•Place the heavly soled and bgger
tems n the lower basket and smaller,
delcate and lght tems n the upper
basket.
•Place the hollowed dshes such as
bowls, glasses and pans upsde down n
the dshwasher. Thus, accumulaton of
water n deep hollows s prevented.
A
To prevent possble njures,
always place the sharp and
ponted dshes such as servce
fork, bread knfe, etc. upsde
down so as ther ponted ends
wll face down or they wll le
horzontally n the dsh basket.
Unload dshes n the lower basket frst and
then the dshes n the upper basket.

/
19 / 38
EN
Preparation
Suggestions for loading the dishwasher
Lower basket
Upper basket
Improper Loading Of Dishware
Improper Loading Of Dishware

20
/
/38 EN
Preparation
Upper basket height
adjustable rack
Use the lower and upper parts of the heght
adjustable racks n the upper basket of
the machne by sldng them down or up
accordng to the heghts of the glasses, cups
or etc. (A, B, C).
Cutlery basket
Cutlery basket s desgned to wash your
dshes such as knfe, fork, spoon, etc. n an
effcent manner.
Snce the cutlery basket can be moved (A,
B), you can create more space whle placng
your dshes n the lower basket and free up
space for your dshes of dfferent szes.
Upper basket multipurpose
service rack
Ths accessory located at the upper basket
of your machne allows you to easly wash
peces such as extra long ladles and bread
knves.
You can lft up the upper basket
multpurpose servce rack to remove t f you
do not want to use t.
If you want to use the upper basket
multpurpose servce rack agan, you can
easly attach t to the sde secton of your
upper basket.