Flavor Burst Dual Series Configuration guide

©2022 Flavor Burst Company Printed in January Printed in
All Rights Reserved The United States of America
Flavor Burst ®
Dual Series Systems
- Operations Manual Supplement
Models: CTP 44SS
CTP 44BLD
CTP 44BEV
CTP 44CBB
CTP 44FCB
CTP 44SS/BEV
CTP 44SS/BLD
CTP 44SS/CBB
CTP 44SS/FCB
CTP 44BEV/BLD
CTP 44BEV/FCB
CTP 44BEV/CBB
CTP 44BLD/CBB
CTP 44BLD/FCB
CTP 44CBB/FCB
Manufactured by
Flavor Burst Company
499 Commerce Drive
Danville, IN 46122
For general information and to locate a
distributor near you, call or visit our website:
Phone: [phone]
Toll Free Number: [phone]
Fax: [phone]
www.flavorburst.com
For pricing, ordering and support, contact
one of our qualified distributors.

1
PLEASE READ FIRST!
This supplement is not a full operations manual. It does not contain complete
information on installing and maintaining your new system. The purpose of
this manual supplement is to provide you with additional information and
instruction, such as diagrams and part lists, which are either not included or
are different from what is shown in the standard manual. Read through these
installation and maintenance instructions first and then refer to your standard
manual for the rest of the instructions. Be sure to also refer to your standard
model to get complete information needed for your system.
In some cases, two standard manuals may be included with the “44” Dual
Series systems, in addition to this supplement. If your model flavors two
different types of product (soft serve and beverage, or FCB and Flavor Blend,
etc), refer to each product type’s manual for instructions on installing, cleaning,
and maintaining each side of your Dual Series system. For example, if you
have a model CTP 44SS/BLD, use the CTP 80SS manual to service the side
of your system that stripes soft serve with flavors, and use the CTP 44BLD
manual to service the side of your system that blends flavoring with soft serve.
All manuals and supplements are available on www.flavorburst.com

2
TABLE OF CONTENTS
FCC Conformity Statement..…...………………………………………….………………...3
Introduction……………………………...………………………………………….………….4
Safety Precautions……………………………..…………….………..……..….…………....4
Environmental Notices………………...………………………………………….………….5
Parts Identification/Function……...……………………….……..…..……….……..….…..7
Daily Opening, Daily Closing, Scheduled Maintenance – Notes…….………….…...52
For Models CTP 44SS, CTP 44BLD, CTP 44BEV, CTP 44CBB, CTP 44FCB…52
For Models CTP 44SS/FCB, CTP 44BLD/FCB, CTP 44BEV/FCB, &
CTP 44CBB/FCB…52
For Models CTP 44SS/BLD, CTP 44SS/BEV, CTP 44BEV/BLD,
CTP 44SS/CBB , CTP 44BEV/CBB, CTP 44BLD/CBB…52
Comparing the Injector and Blending Assemblies………….………...…………....53
Replacing the Syrup Flavors – Notes...…………………………..…….………...……...56
Equipment Setup……………………………………………………...…..……….……..….58
Installing the Spout Adapters – Notes……………..……………………....….....…58
Installing the Touch Panel and Mounting Bracket – Notes.……………...….....…59
Installing the Spigot Switches – Notes…………………….………...…………...…60
EQUIPMENT SETUP – Continued..………………………………………….......…60
Connecting the Unit Syrup Lines..…………………………………………..........…60
Power Connections and Power Up……………………………………….…........…63
Installing Flavors and Priming Syrup Lines – Notes.……………...……...….....…64
Color Touch Panel Overview - Notes……………..…………………………....……...…66
Color Touch Panel Setup – Notes………………..……..…..……...……………….66
Testing the Drive Motor and Switch Connections……..…..……...……………….67
Testing the Syrup Connections………………………………………………………68
Testing the Dual Series System – Notes……………………………………………68
Other Important Information…………….....…….……………………………….....….....70
Ordering/Service Information…………….…….…...…………………..……….........…..71

3
FCC Conformity Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure and SAR Statements SAR Statement.
The Flavor 10* has been tested for body-worn Specific Absorption Rate (SAR) compliance. The FCC
has established detailed SAR requirements and has established that these requirements. RF Exposure
Information. The radio module has been evaluated under FCC Bulletin OET 65C (01-01) and found to
be compliant to the requirements as set forth in CFR 47 Sections, 2.1093, and 15.247 (b) (4)
addressing RF Exposure from radio frequency devices. This model meets the applicable government
requirements for exposure to radio frequency waves. The highest SAR level measured for this device
was 0.293W/kg.
*The Flavor 10 is also referred to as the Touch Panel throughout this manual.

4
Congratulations on your purchase of a CTP 44
Dual Series flavoring system! As a food and
beverage provider, your customers are your
greatest asset. Your primary concern must be
the health and welfare of your customers. This
manual supplement provides specialty
information on the parts of your equipment
model that differ from the standard model. Use
this supplement with your full standard
manual(s) for everyday operating guidelines
and procedures. We urge you to follow these
instructions carefully and maintain strict sanitary
practices in your daily operating routine. *Use
this manual supplement in conjunction with the
standard manual(s) included with your system.*
The CTP 44 Dual Series unit is an add-on
system that flavors product from two different
freezers or two barrels on a multi-spout freezer.
Each side injects or blends up to four different
concentrated flavorings throughout the base
product as it is dispensed. Dispensing Flavor
Burst product is very simple. Select from the
screen which product you want, select the
flavor(s) and draw the product. The Flavor
Burst system will automatically flavor the
product at the spout. You can also have
multiple flavors per serving.
Flavor Burst®syrup is stored within the
equipment cabinet in 1 gallon disposable bags.
Proper syrup injection rate is maintained by
adjusting the flavor level on the system Touch
Panel.
Components of the CTP 44 system should be
cleaned daily to ensure the highest standard of
sanitation. When your equipment is delivered
or if it has been unused for more than 24 hours,
follow the DAILY OPENING PROCEDURES in
your standard operations manual(s).
NOTE: PARTS AND PART NUMBERS MAY
VARY FROM WHAT IS SHOWN AND LISTED.
CONSULT YOUR LOCAL DISTRIBUTOR IF
YOU HAVE ANY QUESTIONS CONCERNING
DIFFERENCES.
Always follow these safety precautions when
operating the Flavor Burst®system:
DO NOT operate the system without
reading this operator’s manual. Failure to follow
this instruction may result in equipment
damage, poor system performance, health
hazards, or personal injury.
DO NOT operate the system unless it is
properly grounded. Failure to follow this
instruction may result in electrocution.
DO NOT operate the system with larger
fuses than specified on the system data label.
Failure to follow this instruction may result in
electrocution or damage to the machine.
Consult your electrician.
DO NOT put objects or fingers in the
door spout. Failure to follow this instruction may
result in contaminated product or personal
injury from blade contact.
The CTP 44 cabinet system must be
placed on a level surface capable of supporting
at least 220 lbs of weight. Failure to comply
may result in personal injury or equipment
damage.
DO NOT place more than 25 lbs of
weight on top of the cabinet. Failure to comply
may result in personal injury or equipment
damage.
DO NOT install the unit in an area where
a water jet could be used, and do not use a
water jet to clean or rinse the system. Failure to
follow these instructions may result in serious
electrical shock.
SAFETY PRECAUTIONS
INTRODUCTION

5
HAZARD COMMUNICATION STANDARD
(HCS) – The procedure(s) in this manual
include the use of chemical products. These
chemical products will be highlighted in
bold-faced letters followed by the
abbreviation (HCS) in the text portion of the
procedure. See the Hazard Communication
Standard (HCS) manual for the appropriate
Material Safety Data Sheet(s) (MSDS).
NOISE LEVEL: Airborne noise emission
does not exceed 70 dB(A) when measured at a
distance of 1.0 meter from the surface of the
machine and at a height of 1.6 meters from the
floor.
NOTE: Operations Manual subject to
change. Contact your local distributor for most
recent updates concerning the CTP 44 system.
NOTE: Access to the service area is
restricted to persons having safety / hygiene
knowledge and practical experience of the
appliance.
NOTE: This appliance can be used by
children aged from 8 years and above and
persons with reduced physical, sensory, or
mental capabilities or lack of experience and
knowledge if they have been given supervision
or instruction concerning use of the appliance in
a safe way and understand the hazards
involved.
NOTE: Children shall not play with the
appliance.
NOTE: Cleaning and user maintenance
shall not be made by children without
supervision.
NOTE: Operate unit under normal
ambient temperatures between 60 and 80
degrees Fahrenheit. Unit should never be
exposed to freezing temperatures.
ENVIRONMENTAL NOTICES
If the crossed out wheeled bin symbol is affixed to this product, it signifies that this product
is compliant with the EU Directive for Waste Electric/Electronic Goods (WEEE) as well as
other similar legislation in affect after August 13, 2005. Therefore, it must be collected
separately after is use is completed, and cannot be disposed of as unsorted
municipal waste.
The user is responsible for returning the product to the appropriate collection facility, as specified by
your local codes. For additional information regarding applicable local laws, please contact the
municipal facility and/or local distributor.

6
PAGE INTENTIONALLY LEFT BLANK

7
General System Overview (See Figure 1)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
1 ELE 906A TOUCH PANEL ASSEMBLY
WITH BRACKET 1 Flavor Burst unit command center.
2 ELE 434 POWER CABLE 1 Supplies the electronics board with power.
3-1 INJ 424TS INJECTOR ASSEMBLY
2*
1**
0***
FOR “SS” SYSTEMS: Injects syrups into the product.
*2 for 44SS systems.
**1 for 44SS/BLD, 44SS/BEV, 44SS/CBB, & 44SS/FCB
systems.
***0 for 44BLD, 44BEV, 44FCB, 44CBB, 44BEV/FCB,
44BLD/FCB, 44BEV/BLD, 44BEV/CBB, 44BLD/CBB, &
44CBB/FCB systems.
OR…
3-2 INJ 424BLD
FLAVOR BLEND
BLENDING ASSEMBLY
2*
1**
0***
FOR “BLD” SYSTEMS: Blends syrups into the product.
*2 for 44BLD systems.
**1 for 44SS/BLD, 44BLD/FCB, 44BLD/CBB, &
44BEV/BLD systems.
***0 for 44SS, 44BEV, 44FCB, 44CBB, 44BEV/FCB,
44SS/FCB, 44SS/BEV, 44SS/CBB, 44BEV/CBB, &
44CBB/FCB systems.
OR…
3-3 INJ 424VTS
VERTICAL BLENDING
ASSEMBLY
2*
1**
0***
FOR “BEV” SYSTEMS: Blends syrups into the product.
*2 for 44BEV systems.
**1 for 44SS/BEV, 44BEV/BLD, 44BEV/CBB, &
44BEV/FCB systems.
***0 for 44BLD, 44SS, 44FCB, 44CBB, 44SS/FCB,
44BLD/FCB, 44SS/BLD, 44SS/CBB, 44BLD/CBB, &
44CBB/FCB systems.
OR…
3-4 INJ 424P PREMIUM BEVERAGE
BLENDNG ASSEMBLY
2*
1**
0***
FOR “CBB” SYSTEMS: Blends syrups into the
product.
*2 for 44CBB systems.
**1 for 44SS/CBB, 44BEV/CBB, 44BLD/CBB &
44CBB/FCB systems.
***0 for 44BLD, 44SS, 44FCB, 44SS/FCB, 44BLD/FCB,
& 44SS/BLD systems.
OR…
3-5 ADPT
TY80S-FCB
MODIFIED FCB FREEZER
SPOUT ASSEMBLY
2*
1**
0***
FOR “FBC” SYSTEMS: Dispenses product blended
with syrups.
*2 for 44FCB systems.
**1 for 44SS/FCB, 44BEV/FCB, 44CBB/FCB &
44BLD/FCB systems.
***0 for 44BLD, 44BEV, 44SS, 44CBB, 44BEV/BLD,
44SS/BEV, 44SS/BLD, 44SS/CBB, 44BLD/CBB, &
44BEV/CBB systems.
PARTS IDENTIFICATION/FUNCTIONS

8
General System Overview (Continued)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
4 MIS 3196 STAINLESS TUBE / CABLE
CASING ASSEMBLY 2 Attaches the flavor lines and/or cables to the side of the freezer.
5 SYR 935 4’ 9-TUBE ASSEMBLY
EXTENSION
1 Adds length to the flavor line assembly.
6 CAB 113 FLAVOR TRAY 8 Houses syrup bags.
7 N/A FLAVOR BURST
STANDARD CABINET 1 Houses syrup trays and bags.
8 SAN 740 SANITIZER TANK
ASSEMBLY 1 Houses sanitizer cleaning solution.
9 ELE 525 36” SPIGOT SWITCH
EXTENSION 1 Adds length to the spigot switch.
10-1 SPR 5800A SPARE PARTS KIT 1*
0**
FOR “SS” SYSTEMS: Houses extra spare parts and
wear items.
*1 for 44SS, 44SS/BLD, 44SS/BEV, 44SS/CBB, &
44SS/FCB systems.
**0 for 44BLD, 44BEV, 44FCB, 44CBB, 44BEV/FCB,
44BLD/FCB, 44BLD/CBB, 44BEV/CBB, 44CBB/FCB, &
44BEV/BLD systems.
OR…
10-2 SPR 5800BLD
SPARE PARTS KIT
TOUCHSCREEN FLAVOR
BLEND
1*
0**
FOR “BLD” SYSTEMS: Houses extra spare parts and
wear items.
*1 for 44BLD, 44SS/BLD, 44BLD/FCB, 44BLD/CBB, &
44BEV/BLD systems.
**0 for 44SS, 44BEV, 44FCB, 44CBB, 44BEV/FCB,
44SS/FCB, 44SS/CBB, 44BEV/CBB, 44CBB/FCB, &
44SS/BEV s
y
stems.
OR…
10-3 SPR 5800BEV
SPARE PARTS KIT
TOUCHSCREEN
BEVERAGE
1*
0**
FOR “BEV” SYSTEMS: Houses extra spare parts and
wear items.
*1 for 44BEV, 44SS/BEV, 44BEV/BLD, 44BEV/CBB, &
44BEV/FCB systems.
**0 for 44BLD, 44SS, 44FCB, 44CBB, 44SS/FCB,
44BLD/FCB, 44SS/CBB, 44BLD/CBB, 44CBB/FCB, &
44SS/BLD systems.
OR…
10-4 SPR 5800P
SPARE PARTS KIT
TOUCHSCREEN
BEVERAGE
1*
0**
FOR “CBB” SYSTEMS: Houses extra spare parts and
wear items.
*1 for 44CBB, 44SS/CBB, 44BEV/CBB, 44BLD/CBB, &
44CBB/FCB systems.
**0 for 44BLD, 44SS, 44BEV, 44FCB, 44SS/FCB,
44BLD/FCB, 44SS/BEV, 44BEV/BLD, 44BEV/FCB, &
44SS/BLD systems.
OR…
10-5 SPR 5800FCB SPARE PARTS KIT
TOUCHSCREEN FCB
1*
0**
FOR “FCB” SYSTEMS: Houses extra spare parts and
wear items.
*1 for 44FCB, 44SS/FCB, 44BEV/FCB, 44CBB/FCB, &
44BLD/FCB systems.
**0 for 44BLD, 44BEV, 44SS, 44CBB, 44BEV/BLD,
44SS/BEV, 44SS/CBB, 44BLD/CBB, 44BEV/CBB &
44SS/BLD systems.

9
General System Overview (Continued)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
11 ELE 525M MALE TO MALE 48”
SWITCH EXTENSION 2 Connects Touch Panel to the freezer switch.
12 MIS 3026S TOUCH PANEL CABLE
CASING 1 Conceals and protects the Touch Panel cable, as well
as attaches it to the freezer.
13-1 SYR 944 SYRUP BAG CONNECTOR
ASSEMBLY
8*
4**
0***
FOR “SS”, “BLD”, & “CBB” SYSTEMS:
Transports syrup from the bag to the pumps.
*8 for 44SS, 44BLD, 44CBB, 44SS/BLD, 44SS/CBB, &
44BLD/CBB systems.
**4 for 44SS/FCB, 44SS/BEV, 44BLD/FCB,
44BEV/BLD, 44BEV/CBB, & 44CBB/FCB systems.
***0 for 44BEV, 44FCB, & 44BEV/FCB systems.
OR…
13-2 SYR 944SH SYRUP BAG CONNECTOR
ASSEMBLY - SHAKE
8*
4**
0***
FOR “BEV” & “FCB” SYSTEMS: Transports syrup
from the bag to the pumps.
*8 for 44BEV, 44FCB, & 44BEV/FCB systems.
**4 for 44SS/FCB, 44SS/BEV, 44BLD/FCB,
44BEV/BLD, 44BEV/CBB, & 44CBB/FCB systems.
***0 for 44SS, 44BLD, 44CBB, 44SS/CBB, 44BLD/CBB,
& 44SS/BLD s
y
stems.

10
General System Overview
Figure 1

11
Cabinet – (See Figure 2)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
1 N/A ELECTRONICS SYSTEM 1 Control system for the unit.
2 CAB 135R-A RIGHT SIDE PANEL 1 Holds tray support brackets and panel brackets.
3 CAB 145 TRAY SUPPORT
BRACKET 8 Supports flavoring trays.
4 FAS 2024 8-32 X 1/4 PAN HEAD 28 Fastens panel brackets to divider panel, secures sides.
5 FAS 2014 8-32 X 1/2" PAN HEAD 25 Connects panels of the cabinet.
6-1 SYR 944 SYRUP TUBE ASSEMBLY
– SOFT SERVE
8*
4**
0***
FOR “SS”, “BLD”, & “CBB” SYSTEMS: Transports
syrup from the bag to the pumps.
*8 for 44SS, 44BLD, 44CBB, 44SS/BLD, 44SS/CBB, &
44BLD/CBB systems.
**4 for 44SS/FCB, 44SS/BEV, 44BLD/FCB, 44BEV/CBB,
44BEV/BLD, & 44CBB/FCB systems.
***0 for 44BEV, 44FCB, & 44BEV/FCB s
y
stems.
OR…
6-2 SYR 944SH SYRUP TUBE ASSEMBLY
– SHAKE
8*
4**
0***
FOR “BEV” & “FCB” SYSTEMS: Transports syrup from
the bag to the pumps.
*8 for 44BEV, 44FCB, & 44BEV/FCB systems.
**4 for 44SS/FCB, 44SS/BEV, 44BLD/FCB, 44BEV/CBB,
44BEV/BLD, & 44CBB/FCB systems.
***0 for 44SS, 44BLD, 44CBB, 44SS/BLD, 44SS/CBB, &
44BLD/CBB s
y
stems.
7 ELE 932-MX PUMP & SANITIZER
CABLE HARNESS - MX 1 Provides power to the syrup and sanitizer pumps.
8 MIS 3066 MINI BUSHING 1 Protects flush tube.
9-1 MIS 3028-80 FLUSH TUBE ASSEMBLY
– SOFT SERVE
1*
0**
FOR “SS”, “BLD”, & “CBB” SYSTEMS: Connects with
flavor line to flush with sanitizer solution.
*1 for 44SS, 44BLD, 44CBB, 44SS/BLD, 44SS/CBB, &
44BLD/CBB models.
**0 for 44BEV, 44FCB, 44BEV/FCB models.
OR…
9-2 MIS 3028-S FLUSH TUBE ASSEMBLY
- SHAKE
1*
0**
FOR 44BEV & 44BEV/FCB MODELS: Connects with
flavor line to flush with sanitizer solution.
*1 for 44BEV and 44BEV/FCB models.
**0 for all other models.
OR…
9-3 N/A FLUSH TUBE ASSEMBLY
– FCB BASE
1*
0**
FOR 44FCB MODEL: Connects with flavor line to flush
with sanitizer solution.
*1 for 44FCB model.
**0 for all other models.
OR…
9-4 MIS 3028-
80M-SH
PUMP FLUSH ADAPTER
EXTENSION - MX
1*
0**
FOR SYSTEMS WITH BOTH SOFT-SERVE AND
BEVERAGE / FCB COMPONENTS: Connects with
flavor line to flush with sanitizer solution.
*1 for 44SS/BEV, 44SS/FCB, 44BLD/FCB, 44BEV/CBB,
44CBB/FCB & 44BEV/BLD models.
**0 for 44SS, 44BLD, 44CBB, 44SS/BLD, 44SS/CBB,
44BLD/CBB, 44BEV, 44FCB, & 44BEV/FCB models.
10 CAB 139 FRONT DOOR PANEL 1 Provides access to syrup bags and connectors.

12
Cabinet (Continued)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
11 CAB 136-A REAR PUMP COVER 1 Back panel to cover pumps.
12 FIX 1023 3/16" X 3/16" BARB TUBE CONNECT 1 Splices together flush tubes.
13 CAB 134 DIVIDER PANEL 1 Holds tray support brackets and divides trays.
14 CAB 144R RIGHT PANEL BRACKET 3 Holds tray support rails.
15 CAB 144L LEFT PANEL BRACKET 3 Holds tray support rails.
16 CAB 143 LATCH BRACKET 1 Provides latching tab for front panel latch.
17 FAS 2001 FRONT DOOR PANEL LATCH 1 Latches front door to cabinet front.
18 SYR 938 MX SERIES INTERNAL 9-TUBE
A
SSEMBLY 1 Transports syrup from bags to flavor 9-Tube
A
ssembl
y
.
19 SAN 748 PERISTALTIC SANITIZER PUMP 1 Pumps sanitizer solution to flush tube and
sanitizer line.
20-1 SYR 307 PERISTALTIC SYRUP PUMP –
SOFT SERVE
8*
4**
0***
FOR “SS” & “BLD” SYSTEMS: Pumps syrup
from flavor bags into flavor lines.
*8 for 44SS, 44BLD, & 44SS/BLD systems.
**4 for 44SS/FCB, 44SS/BEV, 44BLD/FCB, &
44BEV/BLD systems.
***0 for 44BEV, 44FCB, & 44BEV/FCB s
y
stems.
20-2 SYR 926 PERISTALTIC SYRUP PUMP -
BEVERAGE
8*
4**
0***
FOR “BEV” & “FCB” SYSTEMS: Pumps syrup
from flavor bags to flavor lines.
*8 for 44BEV, 44FCB, & 44BEV/FCB systems.
**4 for 44SS/FCB, 44SS/BEV, 44BLD/FCB, &
44BEV/BLD systems.
***0 for 44SS, 44BLD, & 44SS/BLD s
y
stems
OR…
20-3 SYR 926P PERISTALTIC SYRUP PUMP –
PREMIUM BEVERAGE
8*
4**
0***
FOR “CBB” SYSTEMS: Pumps syrup from
flavor bags to flavor lines.
*8 for 44CBB systems.
**4 for 44SS/CBB, 44BLD/CBB, 44BEV/CBB, &
44CBB/FCB systems.
***0 for 44SS, 44BLD, 44SS/BLD, 44BEV,
44SS/BEV, 44BEV/BLD, 44SS/FCB,
44BLD/FCB, 44FCB, & 44BEV/FCB s
y
stems.
21 CAB 155L PUMP MOUNTING STRIP – LEFT 1 Support for trays and spacing between panels.
22 CAB 155R PUMP MOUNTING STRIP - RIGHT 1 Support for trays and spacing between panels.
23 FAS 2037 TAPPED NYLON SPACER 12 Secures screw to center panel, and support for
tra
y
s.
24 FAS 2032 STANDARD NYLON SPACERS 12 Provides extra support for flavor trays.
25 FAS 2034 8-32 X 3/4" MACHINE SCREW 12 Attaches bushings to divider panel.
26 MIS 3067 OPEN/CLOSED BUSHING 1 Strain relief for internal 9-Tube Assembly.
27 FIX 1033 1/4" X 1/4" BLKHD (PUSH-TO-
CONNECT
)
1 Connects Sanitizer Tank tube to the unit.
28 TUB 803 TUBING-PER FOOT 1 Transports sanitizer solution from tank to pump.
29 CAB 133 BASE PANEL 1 Attaches the bottom of the inner and side
panels.

13
Cabinet (Continued)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
30 RUB 618 RUBBER BUMPER WITH WASHER
6 Provides spacing between cabinet base and
table.
31 FAS 2035 8-32 NUTS - EXT. LOCK WASHER 6 Attaches to screw and holds rubber bumper in
place.
32 MIS 3074 SHORTY PLUG #1672 6 Covers screw hole in rubber bumper.
33 FAS 2040 6-32 X 1/4" TAPPING SCREW 24 Secures tray support bracket to side panels.
34 CAB 135L-A LEFT SIDE PANEL 1 Holds tray support brackets and panel
brackets.
35 VAL 210 MX SERIES VALVE ASSEMBLY 1 Splits & diverts syrup from pump to activate
s
y
rup line.

14
Cabinet
Figure 2

15
“SS” Injector Assembly and Related Parts (See Figure 3A)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
A INJ 424TS
INJECTOR ASSEMBLY WITH
SYRUP LINES, ADAPTER, &
BRACKET
2*
1**
0***
FOR “SS” SYSTEMS: Injects syrups into the
product.
*2 for 44SS systems.
**1 for 44SS/BLD, 44SS/BEV, 44SS/CBB, &
44SS/FCB systems.
***0 for 44BLD, 44BEV, 44CBB, 44FCB,
44BEV/FCB, 44BLD/FCB, 44BLD/CBB,
44BEV/CBB, 44CBB/FCB & 44BEV/BLD
s
y
stems.
1 INJ 422 INJECTOR HEAD ASSEMBLY 1 Connects flavor line to inject syrups into
product.
1A RUB 652-RSS SMALLER SYRUP PORT O-RING 1 ea. Provides sealed cavity inside syrup port.
1B RUB 651 INJECTOR HEAD O-RING 2-020 1 ea. Provides a sealed cavity.
1C RUB 660 LARGER SYRUP PORT O-RING 1 ea. Provides sealed cavity inside syrup port.
2 INJ 321 GEAR CARTRIDGE ASSEMBLY 1 Rotates product for even syrup distribution.
3 SYR 932 6' 9-TUBE ASSEMBLY 1 Supplies syrup to Injector Head from pumps.
3A FAS 2051 ROLLED FLANGE EYELET 18 ea. Provides tension in syrup line to affix to line
coupler.
3B ROT 510 LINE COUPLER 2 ea. Holds flavor lines in place.
3C ROT 515-C 9-TUBE ASSEMBLY WAVE
SPRING 1 ea. Provides tension between tube connectors.
3D INJ 116 LINE COUPLER NUT - BLACK 1 ea. Attaches flavor tubes to flavor manifold.
3E SYR 901 6' 9-TUBE ASSEMBLY TUBES 9 ea. Brings syrup from pump to Injector Head.
3F ROT 511 LINE COUPLER NUT 1 ea. Connects flavor lines to the internal 9-Tube
Assembly.
3G RUB 602 9-POS TUBE CONN. GASKET 1 ea. Provides sealed cavity.
4 INJ 117 TUBE CONNECTOR BODY –
BLACK 1 Secures flavor line manifold to flavor lines.
5 MIS 3142 FLAVOR LINE DUST CAP – FB
80 1 Covers syrup manifold when not connected.
6 INJ 201A SYRUP MANIFOLD - BLACK 1 Connects flavor line to Injector Head.
7 RUB 601 9-POS DUCKBILL CHECK
VALVE 1 Provides sealed cavity and prevents syrup
leakage.
8 MIS 3143 SUSPENSION BRACKET
A
SSEMBLY 1 Secures Injector Assembly to freezer door.
8A FAS 2107 INJECTOR BRACKET KNOB 1 ea. Secures the two bracket pieces.
8B MIS 3143A SUSPENSION BRACKET PART
A 1 ea. Attaches to freezer door bolts to hang Injector Assembly.
8C MIS 3143B SUSPENSION BRACKET PART
B 1 ea. Secures Bracket Assembly to Injector
A
ssembl
y
.
8D MIS 3144 NYLON SHOULDER WASHER 1 ea. Allows free horizontal movement for bracket
8E ROT 535 ROTOR BRACKET SPRING
WASHER 1 ea. Allows space between hanging and base
brackets

16
“SS” Injector Assembly and Related Parts (Continued)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
9 INJ 323TS INJECTOR ASSEMBLY - NO HEAD 1 Powers Injector system.
9A INJ 330TS INJECTOR MOTOR ASSEMBLY 1 ea. Supplies power to Motor which turns gears.
9B INJ 331 INJECTOR GEARBOX ASSEMBLY 1 ea. Gears turn Gear Cartridge for even syrup
distribution.
9C FAS 2023 ACCESSORY MOUNTING
BRACKET KNOB 1 ea. Secures base Mounting Bracket to Gear Box.
10 ADPT 8750-A CROWN ADAPTER WITH
O-RINGS 1 Attaches Injector Assembly to freezer door.
10A RUB 659 TAYLOR ADAPTER O-RING 8750 1 ea. Creates tension to secure adapter to freezer
door.
10B ADPT 8750 CROWN ADAPTER WITOUT
O-RINGS 1 ea. Attaches Injector Assembly to freezer door.
10C RUB 632 INJECTOR ADAPTER O-RING 1 ea. Creates tension to secure adapter to Injector
Head.
11 ADPT 101A INJECTOR ADAPTER W/ O-RINGS 1 Attaches Injector Assembly to freezer door.
11A RUB 642 ADAPTER O-RING 1 ea. Creates tension to secure adapter to freezer
door.
11B RUB 640 FLAT ADAPTER GASKET 1 ea. Provides sealed cavity inside adapter.
11C ADPT 101 INJECTOR ADAPTER 1 ea. Attaches Injector Assembly to freezer.
11D RUB 632 INJECTOR ADAPTER O-RING 1 ea. Creates tension to secure adapter to Injector
Head.
Figure 3A

17
“BLD” Blending Assembly and Related Parts (See Figure 3B)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
B INJ 424BLD
FLAVOR BLEND BLENDING
ASSEMBLY WITH SYRUP LINES,
ADAPTER, & BRACKET
2*
1**
0***
FOR “BLD” SYSTEMS: Blends syrups into
the product.
*2 for 44BLD systems.
**1 for 44SS/BLD, 44BEV/BLD, 44BLD/CBB,
& 44BLD/FCB systems.
***0 for 44SS, 44BEV, 44CBB, 44FCB,
44BEV/FCB, 44SS/FCB, 44SS/CBB,
44BEV/CBB, 44CBB/FCB & 44SS/BEV
s
y
stems.
1 ADPT 101A INJECTOR ADAPTER W/ O-RINGS 1 Attaches Blending Assembly to freezer door.
1A RUB 642 ADAPTER O-RING 1 ea. Creates tension to secure adapter to freezer
door.
1B RUB 640 FLAT ADAPTER GASKET 1 ea. Provides sealed cavity inside adapter.
1C ADPT 101 INJECTOR ADAPTER 1 ea. Attaches Blending Assembly to freezer.
1D RUB 632 INJECTOR ADAPTER O-RING 1 ea. Creates tension to secure adapter to
Blending Head.
2 INJ 422C BLENDING HEAD ASSEMBLY 1 Connects flavor line to inject syrups into
product.
2A RUB 652-RSS SMALLER SYRUP PORT O-RING 1 ea. Provides sealed cavity inside syrup port.
2B RUB 651 BLENDING HEAD O-RING 2-020 1 ea. Provides a sealed cavity.
2C RUB 660 LARGER SYRUP PORT O-RING 1 ea. Provides sealed cavity inside syrup port.
3 INJ 321C GEAR CARTRIDGE ASSEMBLY 1 Rotates product for even syrup distribution.
4 SYR 932 6' 9-TUBE ASSEMBLY 1 Supplies syrup to Blending Head from
pumps.
4A FAS 2051 ROLLED FLANGE EYELET 18 ea. Provides tension in syrup line to affix to line
coupler.
4B ROT 510 LINE COUPLER 2 ea. Holds flavor lines in place.
4C ROT 515-C 9-TUBE ASSEMBLY WAVE SPRING 1 ea. Provides tension between tube connectors.
4D INJ 116 LINE COUPLER NUT - BLACK 1 ea. Attaches flavor tubes to flavor manifold.
4E SYR 901 6' 9-TUBE ASSEMBLY TUBES 9 ea. Brings syrup from pump to Blending Head.
4F ROT 511 LINE COUPLER NUT 1 ea. Connects flavor lines to the internal 9-Tube
Assembly.
4G RUB 602 9-POS TUBE CONN. GASKET 1 ea. Provides sealed cavity.
5 INJ 117 TUBE CONNECTOR BODY –BLACK 1 Secures flavor line manifold to flavor lines.
6 MIS 3142 FLAVOR LINE DUST CAP – FB 80 1 Covers syrup manifold when not connected.
7 INJ 201A SYRUP MANIFOLD - BLACK 1 Connects flavor line to Blending Head.
8 RUB 601 9-POS DUCKBILL CHECK VALVE 1 Provides sealed cavity and prevents syrup
leakage.
9 INJ 331 BLENDING GEARBOX ASSEMBLY 1 Gears turn Gear Cartridge for even syrup
distribution.
9A FAS 2023 ACCESSORY MOUNTING
BRACKET KNOB 1 ea. Secures base Mounting Bracket to Gear Box.

18
“BLD” Blending Assembly and Related Parts (Continued)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
10 INJ 330HSB HIGH SPEED BLENDING MOTOR
A
SSEMBLY 1 Powers Blending system.
11 MIS 3147 SUSPENSION BRACKET FOR
BLEND ASSEMBLY 1 Secures Blending Assembly to freezer door.
11A MIS 3147A DOOR BRACKET 1 ea. Secures the bracket to the freezer door.
11B MIS 3147B BASE BRACKET 1 ea. Supports the Gear Box.
11C MIS 3147C VERTICAL ADJUSTMENT
BRACKET 1 ea. Secures the door and base brackets and
creates a hin
g
e on the bracket assembl
y
.
11D FAS 2107 THUMB KNOB 2 ea. Secures the base bracket to the vertical
ad
j
ustment bracket.
11E FAS 2024 8-32 x 1/4 PAN HEAD SCREW 2 ea. Secures the door bracket to the vertical
ad
j
ustment bracket.
11F FAS 2035 8-32 NUT EXT. WASHER 2 ea. Locks the screws in place so they don’t loosen.
11G FAS 2177 NYLON LOCKING NUT 3 ea. Secures the suspension bracket to the Gear
Box.
12 ADPT 8750-A
CROWN ADAPTER WITH
O-RINGS 1 Attaches Blending Assembly to freezer door.
12A RUB 659 TAYLOR ADAPTER O-RING 8750 1 ea. Creates tension to secure adapter to freezer
door.
12B ADPT 8750 CROWN ADAPTER WITOUT
O-RINGS 1 ea. Attaches Blending Assembly to freezer door.
12C RUB 632 INJECTOR ADAPTER O-RING 1 ea. Creates tension to secure adapter to Blending
Head.
Figure 3B

19
“BEV” Blending Assembly and Related Parts (See Figure 3C)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
C INJ 424VTS
VERTICAL BLENDING ASSEMBLY
WITH SYRUP LINES, ADAPTER, &
BRACKET
2*
1**
0***
FOR “BEV” SYSTEMS: Blends syrups into
the product.
*2 for 44BEV systems.
**1 for 44SS/BEV, 44BEV/BLD, 44BEV/CBB,
& 44BEV/FCB systems.
***0 for 44SS, 44BLD, 44CBB, 44FCB,
44BLD/FCB, 44SS/FCB, 44SS/CBB,
44BLD/CBB, 44CBB/FCB & 44SS/BLD
s
y
stems.
1 INJ 422VS BLENDING HEAD ASSEMBLY 1 ea. Connects flavor line to inject syrups into
product.
1A RUB 652-RSS SMALLER SYRUP PORT O-RING 1 ea. Provides sealed cavity inside syrup port.
1B RUB 651 BLENDING HEAD O-RING 2-020 1 ea. Provides a sealed cavity.
1C RUB 660 LARGER SYRUP PORT O-RING 1 ea. Provides sealed cavity inside syrup port.
2 INJ 321S GEAR CARTRIDGE ASSEMBLY –
VERTICAL BLENDER 1 Rotates product for even syrup distribution
throughout slush product.
3 SYR 932 6' 9-TUBE ASSEMBLY 1 Supplies syrup to Blending Head from
pumps.
3A FAS 2051 ROLLED FLANGE EYELET 18 ea. Provides tension in syrup line to affix to line
coupler.
3B ROT 510 LINE COUPLER 2 ea. Holds flavor lines in place.
3C ROT 515-C 9-TUBE ASSEMBLY WAVE SPRING 1 ea. Provides tension between tube connectors.
3D INJ 116 LINE COUPLER NUT - BLACK 1 ea. Attaches flavor tubes to flavor manifold.
3E SYR 901 6' 9-TUBE ASSEMBLY TUBES 9 ea. Brings syrup from pump to Blending Head.
3F ROT 511 LINE COUPLER NUT 1 ea. Connects flavor lines to the internal 9-Tube
A
ssembl
y
.
3G RUB 602 9-POS TUBE CONN. GASKET 1 ea. Provides sealed cavity.
4 INJ 117 TUBE CONNECTOR BODY –BLACK 1 Secures flavor line manifold to flavor lines.
5 MIS 3142 FLAVOR LINE DUST CAP – FB 80 1 Covers syrup manifold when not connected.
6 INJ 201A SYRUP MANIFOLD - BLACK 1 Connects flavor line to Blending Head.
7 RUB 601 9-POS DUCKBILL CHECK VALVE 1 Provides sealed cavity and prevents syrup
leakage.
8 MIS 3143 BLENDING SUSPENSION
BRACKET ASSEMBLY 1 Secures Blending Assembly to the freezer
door.
8A FAS 2107 INJECTOR BRACKET KNOB 1 ea. Secures the two bracket pieces.
8B MIS 3143A BLENDING BRACKET PART A 1 ea. Attaches to freezer door bolts to hang
Blending Assembly.
8C MIS 3143B BLENDING BRACKET PART B 1 ea. Secures Bracket Assembly to Blending
Assembly.