flexiform Equity User manual

Equity
Task Controls
Lumbar Support (Mesh Back Chairs Only)
Control Location: Back of the chair
To adjust the lumbar support, use both hands and reach around
the back of the chair. Pull up or push down the lumbar bar until at
the desired position.
Back Lock
Control Location: Right hand side of the chair
(The button is set within the seat height control.)
To activate the back lock, ensure that the control button is
inactivated. Push on the back support to release the lock, set to
the desired position and then push in the control to x into place.
Seat Depth (Optional)
Control Location: Right hand side of the chair
To adjust the seat depth of the chair, push the control inwards and
slide the seat forwards or backwards. Release when at the desired
depth.
Seat Height
Control Location: Right hand side of the chair
To adjust the height of the chair, pull the control upwards and
release when at the desired height. If the user is sitting on the
chair, the seat will go down. Remove the weight from the seat to
adjust the seat up.
PULL UP PUSH
PUSH

Equity
Task Controls
Armrest Height
Control Location: Outside of arms
To adjust the arm height up or down, pull the control upwards and
release when at the desired height.
Armrest Rotation (Optional)
Control Location: Inside of arms
To rotate the armrests, simply press and hold in the control until at
the desired position. The arm pads have 3 preset positions that will
lock in place; straight, inwards, and outwards facing. Additional
rotation is also available.
Armrest Slide (Optional)
Control Location: Arm pads
To adjust the armrests forwards and backwards, simply slide the
top of the arm pads. This is best done while the user is sitting in the
chair.
PULL UP
PUSH