Okamura Lives Pouf User manual

H00368／2020-09
Instructions for Use
Multi-purpose Stool

2
Parts Names and Dimensions
■φ450 (17-3/4″dia)
H340 (13-3/8″
) H420 (16-9/16″
)
H420 (16-9/16″
)
H420 (16-9/16″
)
H500 (19-11/16″
)
Seat
Base
Pull
Seat
Base
■φ600 (23-5/8″dia)
■φ900 (35-7/16″dia)
Seat
Base
Seat
Base
Seat
Base
Tag
Pull
Pull Pull
■φ1200 (47-1/4″dia)
Seat
Base
Power
outlet
Tag
(North American model)
Seat
Base
Tag
H340 (13-3/8″ )
Seat
Base
Pull
H420 (16-9/16″ )
●Many chemical substances will be released by the product when it is first purchased. Sufficiently
ventilate or expose the product to moving air for some time after purchasing it.
●Do not completely close windows when using the product in rooms with conspicuously high
temperatures/humidity (the benchmarks for these are temperatures in excess of 28°C (82.4°F) and
relative humidity in excess of 50%).
Appropriate Ventilation Measures
1
Caution
Installation
Safety Instructions (Make sure to follow these instructions)
This indicates that improper handling may cause injury or property
damage.
Caution

●If found unstable due to loosening of bolts or
screws, retighten them.
●Do not use if any parts come off.
●Do not use this stool as a step
stool or load carrier.
●Do not sit on other than the seat.
●Do not stand on or lean to the
stool. Do not sit on the stool in an
unstable posture or on the front
edge portion of the seat.
●Do not swing the stool while
lifting it.
Do not reconfigure.
This leads to malfunction or accident.
Be careful of the following items since it
may cause injury or damage the product.
Do not put your fingers or hands into
the spaces or moving parts of the
product. This may lead to injuries.
Do not handle roughly, or use improperly.
Failure to follow the safety precautions
cause injury or damage to the product.may
Do not disassemble or repair on your own.
●Do not attempt to disassemble or repair the
product yourself. Please contact our official
dealers when needed.
●If found any loose bolts or screws, do not use
the product. Failure may cause damage to the
product and result in injury.
●Do not move the stool with equipment
connected. Failure may cause disconnection.
●Reconfiguring by yourself causes the product
to malfunction or accident. Okamura will
have no responsibility for any disadvantages
caused by remodeling.
●If you need remodeling, contact our official
dealers beforehand.
Do not place on uneven floor.
Indoor use only. Avoid direct sunlight
●No outdoor or waterfront use.
Avoid high temperature, high humidity,
or extraordinary aridity.
●When placing alongside windows, use curtains
or blinds to avoid direct sunlight.
●Make sure to place the product on an even
floor when using. Failure may cause the
product to deform or to be damaged.
Do not place product under heater
or airconditioner exhausting high
temperature air.
Please follow instructions below. Failure may cause serious damage to the product and
Okamura will have no responsibility for any damages.

3 4
Operation Guide
Power outlet ●Round rotate opening lid
Open Closed
Plastic trim Plastic lid
USB charger Power outlet
＊Press here to rotate
the power unit.
Dent
■Pull
■Power accessory (North American model)
The φ450(17-3/4″dia) and φ600 (23-5/8″dia) stools
are provided with a pull, and can be easily moved.
Put your fingers into the pull, and pull it.
・Do not place any heavy or fragile items on the seat. Do not move the stool with any
items on it. The item may fall to cause you to get injured or damage to the product.
Caution
Electrical specifications
Voltage rating: 125V
Rating capacity: 15A
Rated frequency: 60Hz
＊UL listed for upholding strict safety standards.
Main Materials
Part Applicable model Materials
Seat All models Polyurethane foam
All models Polypropylene
Base φ450/φ600(17-3/4″ dia/23-5/8″ dia) Polyurethane foam
φ900/φ1200(35-7/16″ dia/47-1/4″ dia) Plywood, Polyurethane foam
Glide φ450/φ600(17-3/4″ dia/23-5/8″ dia) Nylon, Polyethylene
φ900/φ1200(35-7/16″ dia/47-1/4″ dia) ABS, Polyethylene
Pull,Tag All models Leather(bull leather)
Cover fabric Interlock Polyester, Cotton
Twill Polyester
＊Please understand that product specifications might change without prior notification due to improvements
made to the product.

5 6
Please follow instructions below. Failure may cause serious damage to the product and
Okamura will have no responsibility for any damages.
Operating Precautions and Maintenance
Maintenance
Instructions to Extend the Life of Product
●This instruction manual is very important, so
store it in an easily accessible location.
●Regular maintenance is recommended for
long-life use. Make your request to us early
for inspections and repairs (fees required)
when the warranty period has expired.
●If the product has become unsteady due to
loosening of the bolts or screws during use,
retighten them immediately.
●Avoid direct exposure to steam. Failure will
cause rust.
●Wipe off any water on the Worktop with a
dry and soft cloth.
●Immediately wipe off tea, coffee, detergent,
chemical, etc. if any spilled.
Cloth part
●Wipe with a well wrung soft cloth moistened.
● If dirt is noticeable, wipe it off with a well wrung
soft cloth moistened with thin neutral detergent.
Be sure to remove detergent completely with a
damp cloth and wipe again with a dry cloth to
dry it.
〈Caution〉
● Do not use the following items which will
damage the coating.
◎Thinner, benzene, alcohol, lacquer, oil, vinegar,
boiling water, polishing powder, etc.
〈Caution〉
●Remove stains as quickly as possible.
●Avoid causing a circular stain, remove not
only the stain but also wipe off thoroughly
around the stain.
●Try the cleaner on inconspicuous area first
since the surface may discolor or deteriorate
by using it.
Resin part
●Brush with a soft brush or tap the surface
softly and vacuum to remove dust to avoid
damaging the cloth.
●When it gets dirty after extended period
of time, wipe with a well wrung soft cloth
moistened with thin neutral detergent. Wipe
clean with a damp cloth. Be sure to wipe
detergent completely and wipe again with a
dry cloth to dry it.
●When using alkaline electrolyzed water to
remove stains, spray directly on the stain and
brush with a soft brush taking care not to
damage the cloth. Then, wipe the moisture
and stain to remove and wait for the cloth to
dry.
●When it gets an oily stain, dab and remove
it by using a dedicated stain remover
immediately. Then wipe with a soft cloth
dampened with water, followed by a dry cloth
to dry. Stains may be permanent depending
on the material .