Fleximounts WR16 User manual

68kg
per shelf
Package Includes:
25x75mm
Fixings Package B
Hammer
Ladder Eye Protection
Wood Drill Bit
Shifter Or Socket Wrench
Stud FinderTape Measure
Pencil Power Drill Masonry Drill Bit
Tools Required for Assembly:
Install Shelf Brackets into Solid Concrete or Masonry Walls
1. Determine the desired height, use template to level and then
transfer the template hole guides onto wall.
2. Drill 60mm deep holes with a 10mm masonry drill bit.
3. Hammer in the expansion anchors (B2) firstly and then install the
shelf brackets with washers (B3) and coach screws (B1) with shifter
or socket wrench.
Solid Concrete or Masonry Wall
Install Shelf Brackets into Timber Wall Studs
60mm
5mm
1.Determine the desired height, use a stud finder to ascertain stud centres
( installation template provided suits the two common stud centres being 450mm
& 600mm. If for the unusual reason that stud centres are different to template
centres, ensure all support brackets provided are installed onto timber wall studs )
2.Drill 60mm deep holes once template has been levelled and into position, using
a 5mm wood drill bit and the holes provided on template.
3.Install the shelf brackets with washers ( B3 ) and Coach Screws ( B1 ) with a shifter or socket wrench.
4.Do not install under any circumstances onto metal stud wall frames.
450mm
600mm
B3 B1
fixed onto the
Timber Wall Stud
450mm
600mm

● This product contains small items that could be a choking hazard if swallowed. Ensure that
these items are kept well away from children at all times.
● Ensure that the enclosed installation manual is thoroughly read and completely understood
before undertaking installation. If you are unsure nor confident about installing this product
based on the information provided in the installation manual, please contact a qualified
tradesperson for assistance.
● Good quality tools and safety equipment are highly recommended when installing this product.
● Prior to installation, confirm that the weight capacity of the wall substrate you are intending to
install shelving onto can support the maximum load rating of this product or multiple products.
● All fixing points available on support brackets must be utilised, ensuring all screws are firmly
tightened into the wall’s substrate post installation.
● Check joint parts on each installed unit every three months, making sure that any screws in
particular have not come loose.
● Never exceed the 68kg maximum load rating per shelf for this product, over loading product
beyond the load rating could lead to product damage or physical injury.
● When storing items onto shelving that are above waist height, ensure care is taken. Take
extreme precautions if handling items on a ladder.
● This product is intended for indoor use only. Use of this product outdoors could lead to product
damage or physical injury.
● Do not install onto metal stud wall frames under any circumstances