7
512-65001-00
(VSD 6000-10000)
-PLACING CANOPY LEGS
INSERT A CANOPY LEG (INCLUDED IN CANOPY OOP
(INCLUDED IN CANOPY OOP(INCLUDED IN CANOPY OOP
(INCLUDED IN CANOPY OOPS
SS
S)
) )
) IN EAC OF T E CORNER
POSTS.
. .
. TILTING LEGS (002-00170-00, S OWN BELOW) ARE PLACED IN PIVOTING SIDE
(S ORE-END) CORNER POSTS. NON-TILTING LEGS (002-00172-00) ARE PLACED IN
NON PIVOTING SIDE CORNER POSTS.
ATTAC USING A ½-13 x 1 1/4” BOLT, FLAT
WAS ER, AND NYLOCK NUT (INCLUDED WIT CANOPY OOP
(INCLUDED WIT CANOPY OOP(INCLUDED WIT CANOPY OOP
(INCLUDED WIT CANOPY OOPS
SS
S)
))
). (FIG. 1).
PLACE BOLT AND WAS ER IN CORNER POST. (FIG. 2).
SLIDE CANOPY LEG INTO CORNER POST. BOLT AND WAS ER ARE INSERTED INTO
CANOPY LEG NUT TRACK. (FIG. 3).
W EN PLACING NON
W EN PLACING NONW EN PLACING NON
W EN PLACING NON-
--
-TILTING LEG INTO CORNER POST, FACE OLES TOWARDS
TILTING LEG INTO CORNER POST, FACE OLES TOWARDS TILTING LEG INTO CORNER POST, FACE OLES TOWARDS
TILTING LEG INTO CORNER POST, FACE OLES TOWARDS
INSIDE OF LIFT
INSIDE OF LIFT INSIDE OF LIFT
INSIDE OF LIFT (FIG. 4).
PLACE ASC ONTO BOLT. (FIG. 5).
LEG MUST BE INSERTED TO AVE 18 INC ES ABOVE CORNER POST.
LEG MUST BE INSERTED TO AVE 18 INC ES ABOVE CORNER POST.LEG MUST BE INSERTED TO AVE 18 INC ES ABOVE CORNER POST.
LEG MUST BE INSERTED TO AVE 18 INC ES ABOVE CORNER POST.
PLACE NUT ON BOLT. TORQUE TO 60 FT/LBS.
TORQUE TO 60 FT/LBS.TORQUE TO 60 FT/LBS.
TORQUE TO 60 FT/LBS.
(FIG. 6).
FIG. 1
FASTENERS
FASTENERS FASTENERS
FASTENERS
INCLUDED
INCLUDED INCLUDED
INCLUDED
WIT OOP
WIT OOP WIT OOP
WIT OOP
ARDWARE
ARDWARE ARDWARE
ARDWARE
CARD
CARD CARD
CARD
