FLOS RF0095500 User manual

EN
REV. 1
DATE 14/12/2021
20
RF0095500
AIM SMALL OPAL DIFFUSER
AIM SMALL F0095009
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

21
EN
Remove the joint (A) by unfastening it with a pair of
pliers (B).
Fig.1
Fig.2
REV. 1
DATE 14/12/2021
RF0095500
AIM SMALL OPAL DIFFUSER
AIM SMALL F0095009
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
A
A
B

22
EN
C
Fig.3
Fig.4
REV. 1
DATE 14/12/2021
RF0095500
AIM SMALL OPAL DIFFUSER
AIM SMALL F0095009
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Lift-up the varnished body (C) from the internal
body (D).
Unscrew the 3 screws (G) from the white reflector.
I
G

23
EN
B
Fig.5
Fig.6
REV. 1
DATE 14/12/2021
RF0095500
AIM SMALL OPAL DIFFUSER
AIM SMALL F0095009
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Remove the diffuser.
NOTE!
Do not screw so fast!!!
Insert the new internal body (D) in the varnished
body (C).(Fig.3 page 22)
Re-assemble the Joint (A).(Fig.1 page 21)
Screw the joint (A) with a pair of pliers (B).(Fig.1
page 21)
G