FLOS ROMEO SOFT F User manual

EN
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF03321
ACID-ETCHED DIFFUSER
REV. 1
DATE 29/07/2021
Romeo
Moon F Romeo
Soft F

1
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Remove the lamp bulb (I) if still present on the lamp device.
EN
Fig.1
I
RF03321
ACID-ETCHED DIFFUSER
REV. 1
DATE 29/07/2021

2
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Insert the diffuser (H).
EN
Fig.2
H
RF03321
ACID-ETCHED DIFFUSER
REV. 1
DATE 29/07/2021

3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Insert the lamp-bulb (I).
EN
Fig.3
I
RF03321
ACID-ETCHED DIFFUSER
REV. 1
DATE 29/07/2021

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Position the fabric lamp shade (N) on the support
ring (D) ensuring to insert the hook threaded screws
(R) into the apposite holes present in the support
ring (D), fasten the small bolts (Q).
Rest the covering ring (O) on the pins (G).
Fig.4
Fig.5
RF03321
ACID-ETCHED DIFFUSER
REV. 1
DATE 29/07/2021