FLOS RF13567 User manual

EN
17
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF13567
ONTHEROCKS 1 HL INTERNAL WHITE DIFFUSER
ONTHEROCKS HL FU465100
REV. 0
DATE 19/04/2022

18
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Remove the glass diffuser assembly (M) by unhooking the rod (H) from the
seats (I).
EN
Fig.1
ONTHEROCKS HL FU465100
I
M
H
RF13567
ONTHEROCKS 1 HL INTERNAL WHITE DIFFUSER
REV. 0
DATE 19/04/2022

19
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
To remove the internal diffuser (O) it is necessary to unfasten the screw (N)
and
slide-out the rod (H).
Assemble now the new spare-part:
Assemble the diffusers by inserting the rod (H) through the lateral holes and
by tighten the screw (N) onto the end side of the rod (H).
EN
Fig.2
ONTHEROCKS HL FU465100
N
O
H
RF13567
ONTHEROCKS 1 HL INTERNAL WHITE DIFFUSER
REV. 0
DATE 19/04/2022

20
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Collocate the diffuser assembly (M) on the wall attachment by resting the rod (H) in the
appropriate seats (I).
Centre (balance) the internal white glass diffuser with the external transparent glass
diffuser on the seats (I).
EN
Fig.3
H
L
M
ONTHEROCKS HL FU465100
I
RF13567
ONTHEROCKS 1 HL INTERNAL WHITE DIFFUSER
REV. 0
DATE 19/04/2022