Flying Quixote Aermacchi MB339A User manual

User Guide
Aermacchi
MB339A/PAN (Prepar3d v 4.x version)
Version 1.1 ● 14 August 2020
Flying Quixote –Via del mandrione 109, 00176 Rome, Italy - Telephone - Email -
www.flyingquixote.com

© [2020] Flying Quixote. All rights reserved.
Via del Mandrione 109, 00176 Rome, Italy
www.flyingquixote.it
Trademarks
Flying Quixote are registered trademarks. All other trademarks or registered trademarks are
the property of their respective owners.
Disclaimer
The information provided in this document is provided "as is" without warranty of any kind.
Flying Quixote disclaims all warranties, either express or implied, including the warranties of
merchantability and fitness for a particular purpose. In no event shall [Flying Quixote] be liable
for any damages whatsoever including direct, indirect, incidental, consequential, loss of
business profits or special damages, even if Flying Quixote or its suppliers have been advised
of the possibility of such damages.
Document Lifetime
Flying Quixote may occasionally update online documentation between releases of the
related software. Consequently, if this document was not downloaded recently, it may not
contain the most up-to-date information. Please refer to www.flyingquixote.it for the most
current information.
From the Web site, you may also download and refresh this document if it has been updated,
as indicated by a change.
Where to get help
Flying Quixote support, product, and licensing information can be obtained as follows.
Product information —Documentation, release notes, software updates, and information
about Flying Quixote products, licensing, and service, are at Flying Quixote website at:
http://www.flyingquixote.it
Technical support —Send a mail to [email protected] including one for making a service
request. Note that to open a service request, you must have a valid support agreement.
Your comments
Your suggestions will help us continue to improve the accuracy, organization, and overall
quality of the user publications. Please send your opinion of this document to:
info@[Flying Quixote.it
If you have issues, comments, or questions about specific information or procedures, please
include the title and, if available, the part number, the revision, the page numbers, and any
other details that will help us locate the subject that you are addressing.

[Flying Quixote] [Prepar3d]
[Aermacchi MB339A/PAN] [V4.X]
©Flying Quixote 2020. All rights reserved. Page 3 of 19
Preface
Thank you for buying a Flying Quixote product.
This guide is a quick tool to support the official manuals of the AERMACCHI MB339
aircraft that can be downloaded in the "Doc" section of our website.
www.flyingquixote.it
For the normal and emergency procedures implemented in the product we recommend
referring to such documents since the aircraft, being programmed with the manufacturer's
factory data and the procedures indicated by it, can be used safely and satisfactorily only by
following this type of documentation.
The purpose of this guide is to explain how to install and activate the product and to indicate
the specific features of using it.

[Flying Quixote] [Prepar3d]FQT_MB339A_PAN_User_guide.docx
[Aermacchi MB339A/PAN] [V4.X]
© Flying Quixote 2020. All rights reserved. Page 4 of 19
Table of Contents
1 Introduction.............................................................................................................................................6
2 Installing, Starting and Stopping the System ....................................................................................9
3 Quick Start guide to keys and features ...........................................................................................13

[Flying Quixote] [Prepar3d]
[Aermacchi MB339A/PAN] [V4.X]
©Flying Quixote 2020. All rights reserved. Page 5 of 19
1Introduction
Detailed Description
MODEL
Accurately modelled mb339 a/pan, built using extensive research materials and hands-on
experience with the real aircraft
massive external animations including storage hatch, RAT, canopy, crew ladder
Animated, configurable front and rear pilots
4096 x 4096 hight fidelity textures
Advanced PBR mapping modelling to produce a truly 3D feel
3D light for authentic night lighting
Three different coloured smoke effects included for an authentic air show experience
COCKPIT
A truly 3D virtual cockpit accurately modelled ejector seats, cockpit wear and tear and stunning
texturing -
every instrument is constructed fully in 3D with smooth animation
smoke system
seat adjustment position and pilot weight settings
canopy full and half position animation
Front cockpit positions included
Every button and switch in the cockpit is accurately modelled
AIRCRAFT SYSTEMS
Gyro-controlled HSI, attitude indicator and turn indicatoR WHITH 'spin-up' times and simulated
gyro-drift
ACCURATED electrical system with AC & DC CIRCUIT.
Custom hydraulic systems,
Original UHF radio, plus retrofitted UHF/VHF unit with the ability to save and recall frequencies
TACAN and ILS radio units, working ADF system, GPS and
FLIGHT DIRECTOR WITH FULLY IMPLEMENTED FUNCTIONALITY

[Flying Quixote] [Prepar3d]FQT_MB339A_PAN_User_guide.docx
[Aermacchi MB339A/PAN] [V4.X]
© Flying Quixote 2020. All rights reserved. Page 6 of 19
RNAV MODALITY.
3 LIVERIES included
(more will be integrated soon and will be released a paintkit)
ami 51° stormo "BOXER” istrana afb
(FAP (FUERZA AEREA PERUANA)
313 GRUPPO ADDESTRAMENTO ACROBATICO FRECCE TRICOLORI (0 TO 10 PONY TAIL NUMBER)
OTHER FEATURES
Realistic and accurate flight dynamics based on real-world performance and handling data, and
input from REAL pilots
Authentic sound sets for ENGINE SWITCH DOORS GEAR WARNINGS BATTERIES AND OTHER
HARDWARE
future implemented task (ASAP)
TacPack-compatible weaponry with the correct brackets and mounts for all weapon types:
- DEFA 30MM gun pod
- CBLS/BDU-33, MK-82, MK-82SE, MK-83 and BDU-50 bombs
- Matra LRF4 and LAU-68 rocket launcher pods
- AIM-9 Sidewinder and Matra Magic A/A missiles
Rear seat position
Note: Weapons functionality will be only available if you have installed the TacPack combat
system software from Vertical Reality Simulations.
CONFIGURATION PANEL with possibility to set Aircraft configuration system lets you choose
between 'cold & dark' or ready for take-offordnance using custom in-flight Weapon Control panel
Custom failure and STANDARD EMERGENCIES
Authentic FUNCTIONAL SAAB/MARCONI COLLIMATOR.
Bug and incomplete working task will be fixed montly. Frequently patch will be released on
www.flyingquixote.it

[Flying Quixote] [Prepar3d]
[Aermacchi MB339A/PAN] [V4.X]
©Flying Quixote 2020. All rights reserved. Page 7 of 19
2Installing, Starting and Stopping the
System
2.1 Installing the system
Once you have purchased the product after registering in our online store
(shopflyingquixote.com) will be sent for mail installer and product activation key (immediately
available in our personal shop page)
Avviare il file setup.exe.
If it not will be automatically done, select your path for p3dv4 ang go ahead.

[Flying Quixote] [Prepar3d]FQT_MB339A_PAN_User_guide.docx
[Aermacchi MB339A/PAN] [V4.X]
© Flying Quixote 2020. All rights reserved. Page 8 of 19
Operation may be take several minutes.
When prompted enter your license and click ok

[Flying Quixote] [Prepar3d]
[Aermacchi MB339A/PAN] [V4.X]
©Flying Quixote 2020. All rights reserved. Page 9 of 19
The operation is now complete. Now you can use the product
To de-install the aircraft from P3dv4 go to "application installation" of Windows and search for
"MB339" by clicking on "Uninstall".

[Flying Quixote] [Prepar3d]FQT_MB339A_PAN_User_guide.docx
[Aermacchi MB339A/PAN] [V4.X]
© Flying Quixote 2020. All rights reserved. Page 10 of 19

[Flying Quixote] [Prepar3d]
[Aermacchi MB339A/PAN] [V4.X]
©Flying Quixote 2020. All rights reserved. Page 11 of 19
3Quick Start guide to keys and features
Some features of the aircraft, especially for some objects that have multiple modes (e.g.
switch guards or the cut-off position unlock function of the engine handle) are implemented
using the right mouse button let's see what they are.
3.1 Posizione Canopy
With the canopy mode semi-opened on 1 (placing the mouse on the semi-angle block) at the
press of the shift-E keys the canopy will be semi-open. This mode is allowed for the hot season
because, since the aircraft does not have an air conditioning system, taxiing with the roof closed
could be prohibitive.
By clicking with the dx button on the block itself, the canopy will open completely

[Flying Quixote] [Prepar3d]FQT_MB339A_PAN_User_guide.docx
[Aermacchi MB339A/PAN] [V4.X]
© Flying Quixote 2020. All rights reserved. Page 12 of 19
The mouse's dx key allows you to change from position 0/1 to which the roof at shift-E press will
open partially or completely.

[Flying Quixote] [Prepar3d]
[Aermacchi MB339A/PAN] [V4.X]
©Flying Quixote 2020. All rights reserved. Page 13 of 19

[Flying Quixote] [Prepar3d]FQT_MB339A_PAN_User_guide.docx
[Aermacchi MB339A/PAN] [V4.X]
© Flying Quixote 2020. All rights reserved. Page 14 of 19
3.2 Throttle lever block Idle/Cut off position.
Also to move the handle unlocking stick from the Idle/cut off position used in the on and off
phase of the aircraft, use a dx button. Pressing the right mouse key when the mouserect is
positioned on the mantle body will switch the indicator from on (active lock) to off (off lock).
When the block is off, the handle can be placed on a cut/off, causing the engine to shut
down.

[Flying Quixote] [Prepar3d]
[Aermacchi MB339A/PAN] [V4.X]
©Flying Quixote 2020. All rights reserved. Page 15 of 19
.

[Flying Quixote] [Prepar3d]FQT_MB339A_PAN_User_guide.docx
[Aermacchi MB339A/PAN] [V4.X]
© Flying Quixote 2020. All rights reserved. Page 16 of 19
3.3 Security Lids
Some of the keys attached to delicate features, which were accidentally used that could
jeopardize flight safety, are covered with protective quarts.
To raise the lids you need to interact with them using the right mouse button. Once it is lifted you
can always press on it with the sx button of the mouse to move the underlying switch.

[Flying Quixote] [Prepar3d]
[Aermacchi MB339A/PAN] [V4.X]
©Flying Quixote 2020. All rights reserved. Page 17 of 19

[Flying Quixote] [Prepar3d]FQT_MB339A_PAN_User_guide.docx
[Aermacchi MB339A/PAN] [V4.X]
© Flying Quixote 2020. All rights reserved. Page 18 of 19
3.4 Clock
The clock has a stopwatch mode (normally used in various procedures such as engine start,
take-off, or control and testing flights such as I post IRAN or periodic inspections). Pressing once
on the top-right button with the left mouse button the hands reset and the stopwatch starts.
Pressing again will stop you allowing you to mark the time, pressing again you return to the time
mode.

[Flying Quixote] [Prepar3d]
[Aermacchi MB339A/PAN] [V4.X]
©Flying Quixote 2020. All rights reserved. Page 19 of 19
3.5 Auto Rudder
If the virosbandometer ball does not work in flight, check that you have not ticked the
Autorudder option.
3.5.1 World Wide Web
You can access the most current Flying Quixote documentation on the World Wide Web at the
following site: http://www.fluingquixote.it
We appreciate your comments. Thanks for your support.