Flymo GT500 WHEELS User manual

GB
IMPORTANT INFORMATION
Read before use and retain for future
reference
D
WICHTIGE INFORMATION
Bitte vor dem Benutzen des Gerätes
durchlesen und gut aufbewahren
F
RENSEIGNEMENTS IMPORTANTS
A lire avant usage et à conserver pour
référence ultérieure
NL
BELANGRIJKE INFORMATIE
Leest u deze informatie voor het
gebruik en bewaar ze voor
toekomstige raadpleging
N
VIKTIG INFORMASJON
Les bruksanvisningen før bruk og
oppbevar denne for senere bruk.
S
VIKTIG INFORMATION
Läs anvisningarna före användningen
och spara dem för framtida behov
DK
VIGTIGE OPLYSNINGER
De bør læse dette før brug og gemme
til senere henvisning
E
INFORMACIÓN IMPORTANTE
Léase antes de utilizar y consérvela
como referencia en el futuro
P
INFORMAÇÕES IMPORTANTES
Leia antes de utilizar e guarde para
consulta futura
I
INFORMAZIONI IMPORTANTI
Leggere prima dell’uso e conservare
per consultazione futura
SF
TÄRKEÄÄ TIETOA
Lue tämä ennen käyttöä ja säilytä
myöhempää tarvetta varten
(GB) INSTRUCTION MANUAL
(D) BEDIENUNGSANWEISUNG
(F) MANUEL D’UTILISATION (NL) GEBRUIKSAANWIJZING
(N) BRUKSANVISNING
(SF) KÄYTTÖHJE (S) BRUKSANVISNING (DK) BRUGSANVISNING
(E) MANUAL DE INSTRUCCIONES (P) INSTRUÇNÕES PARA O USO (I) ISTRUZIONI PER L’USO
GT500
WHEELS

A
900
B
C D
E
532
4
1
1
2
1
31
2
3
4
5
1
2
1
2
3
4
2

Fitting the Lower Handle to the Lawnmower
1. Feed the hook (A2) attached to the lower handle (A1) halfway
through the centre slot of the guide (A3), in the direction indicated by
the arrow (A4).
2. Maintaining the hook (A2) in the centre slot of the guide (A3) turn
the lower handle (A1) clockwise through 900 to place both legs of
the lower handle in position between the hood brackets (A5). as
illustrated in Fig A.
3. Fit the lower handle (B1) to the deck with the lower handle pin (B2) as
illustrated in Fig B.
Fitting the Wheel frame to the lawnmower
1. Attach the wheels (C1) to the wheel frame (C2) with the wheel
retaining clips (C3) as illustrated in Fig C.
2. Fit the wheel frame (D1) to the deck with the lower handle bolt (D2),
small washer (D3), large washer (D4) and locknut (D5) as illustrated in
Fig D.
3. Locate the lower telescopic tubes (E1) inside the upper telescopic
tubes (E2) and secure with the pin (E3) and retaining clip (E4) as
illustrated in Fig E.
For further information, refer to the full Instruction Booklet supplied
with your product.
GB

5119123-01
Electrolux Outdoor Products
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
ENGLAND
Telephone - (00) 44 1325 300303 Fax - (00) 44 1325 310339
UK Telephone - 01325 300303 Fax - 01325 310339
Our policy of continuous improvement means that the specification of products may be altered from time to time
without prior notice. Electrolux Outdoor Products manufacture products for a number of well known brands under
various registered patents, designs and trademarks in several countries.
© Electrolux Outdoor Products Ltd. Registered Office, Electrolux Works, Oakley Road, Luton LU4 9QQ
Registered number 974979 England
From the Electrolux Group. The world’s No.1 choice.
The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use.
More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum
cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150
countries around the world.