SAFETY PRECAUTIONS
9. Switch off before pushing the pro uct over
surfaces other than grass.
10. Never operate the pro uct with amage guar s
or without guar s in place.
11. Switch on the motor accor ing to instructions an
with feet well away from the bla e(s).
12. Do not put han s or feet near or un er rotating
parts.
13. Do not tilt pro uct when the motor is running,
except when starting an stopping. In this case,
o not tilt more than absolutely necessary an lift
only the part which is away from the operator.
Always ensure that both han s are in the operating
position before returning the appliance to the groun .
14. Never pick up or carry a pro uct when it is
operating or still connecte to the mains supply.
15. Remove the plug from the mains :
- before touching the bla e (ensure the bla e has
come to a complete stop);
- before leaving the pro uct unatten e for any perio ;
-before clearing a blockage;
- before checking, cleaning or working on the appliance;
- if you hit an object. Do not use your pro uct until
you are sure that the entire pro uct is in a safe
operating con ition.;
-if the pro uct starts to vibrate abnormally. Check
imme iately. Excessive vibration can cause injury.
Maintenance an storage
1. Caution: Do not touch rotating bla e(s)
2. Keep all nuts, bolts an screws tight to be sure the
pro uct is in safe working con ition.
3. Replace worn or amage parts for safety.
4. Only use the replacement spare parts an
accessories specifie for your pro uct.
5. Be careful uring a justment of the pro uct to
prevent entrapment of the fingers between moving
cutting parts an fixe parts of the machine.
6. Renew your metal bla e after 50 hours mowing or 2
years whichever is the sooner - regar less of con ition.
7. If, uring the life of the pro uct, the belt begins to
slip, return the pro uct to an Authorise Service
Dealer for maintenance.
8. Store in a cool ry place an out of reach of
chil ren. Do not store out oors.
9. Allow the pro uct to cool for atleast 30 minutes
before storing.
SERVICE RECOMMENDATIONS
• Your pro uct is uniquely i entifie by a silver an black pro uct rating label.
• We strongly recommen that your pro uct is service at least every twelve months, more often in a professional
application.
GUARANTEE AND GUARANTEE POLICY
If any part is foun to be efective ue to faulty
manufacture within the guarantee perio , Husqvarna UK
Lt ., through its Authorise Service Repairers will effect
the repair or replacement to the customer free of charge
provi ing:
(a)The fault is reporte irectly to the Authorise Repairer.
(b)Proof of purchase is provi e .
(c)The fault is not cause by misuse, neglect or faulty
a justment by the user.
( )The failure has not occurre through fair wear an tear.
(e)The machine has not been service or repaire ,
taken apart or tampere with by any person not
authorise by Husqvarna UK Lt ..
(f)The machine has not been use for hire.
(g)The machine is owne by the original purchaser.
(h)The machine has not been use outsi e of the
country for which it was specifie .
(i) The machine has not been use commercially.
*This guarantee is a itional to, an in no way
iminishes the customers statutory rights.
Failures ue to the following are not covere , therefore it
is important that you rea the instructions containe in
this Operator's Manual an un erstan how to operate
an maintain your machine:
Failures not covere by guarantee
*Replacing worn or amage bla es
*Failures as a result of not reporting an initial fault.
*Failures as a result of su en impact.
*Failures as a result of not using the pro uct in
accor ance with the instructions an
recommen ations containe in this Operator's Manual.
*Machines use for hire are not covere by this guarantee.
*The following items liste are consi ere as wearing
parts an their life is epen ent on regular
maintenance an are, therefore not normally subject to
a vali warranty claim: Bla es, Electric Mains cable.
*Caution! Husqvarna UK Lt . oes not accept liability
un er the warranty for efects cause in whole or part,
irectly or in irectly by the fitting of replacement parts
or a itional parts that are not either manufacture or
approve by Husqvarna UK Lt ., or by the machine
having been mo ifie in any way.
ENVIRONMENTAL INFORMATION
Husqvarna UK Lt . pro ucts are manufacture un er an
Environmental Management System (ISO 14001) using,
where practical, components manufacture in the most
environmentally responsible manner, accor ing to
company proce ures, an with the potential for recycling
at the en of the pro ucts’ life.
• Packaging is recyclable an plastic components have
been labelle (where practical) for categorise
recycling.
• Awareness of the environment must be consi ere
when isposing of ‘en -of-life’ pro uct.
• If necessary, contact your local authority for isposal
information.
The symbol on the pro uct or on its packaging
in icates that this pro uct may not be treate as
househol waste. Instea it shall be han e over to the
applicable collection point for the recycling of electrical
an electronic equipment. By ensuring this pro uct is
ispose of correctly, you will help prevent potential
negative consequences for the environment an human
health, which coul otherwise be cause by inappropriate
waste han ling of this pro uct. For more etaile
information about recycling of this pro uct, please contact
your local council office, your househol waste isposal
service or the shop where you purchase the pro uct.
ENGLISH - 2
To ensure you have a secure connection between the
lawnmower an the extension cable we strongly recommen
you use the following metho of attaching the cable:
1. Plug the short connection lea into the socket of the
extension cable. (M1).
2. Form a loop in the en of the extension cable near to
the socket an secure this in the strain relief feature
at the top of the switchbox. (M2) This will cause the
socket to hang in a ownwar irection. (M3)
CH
