
Flyron Technology Co., Ltd. FN-W101A Radio Remote MP3 Audio Player
www.flyrontech.com E-mail: info@flyrontech.com
Corresponding Function/Mode
Play the associated audio file once
Play the associated audio file in a loop
Play all the audio files in order
Play all the audio files in random
4.2. Audio Files Uploading
There is a micro USB port on the device, and users can connect it to computer through a USB data cable to upload/update audio files.
The built-in flash memory or an inserted micro SD card will be detected and displayed on PC working as a USB flash drive. Please
refer to the image below.
After that, delete the preloaded audio files for testing purpose at factory, and copy yours onto the memory. The arrangeme-
nts of the audio files are managed by physical index order. In other words, the file that is to be loaded first in the storage
device will be associated with key 1. The last (ninth) file to be loaded in the storage device will be associated with key 9. In
order to ensure a correct ‘one-on-one’ order, please refer to the following steps.
1). Build a new folder on computer and put the 9 audio files in this new folder.
2). Rename the audio files from 001.mp3 to “009.mp3”, and make sure they are ranked from “001.mp3 to “009.mp3” in order.
3). Connect the device to computer through a USB data cable (don’t get the device powered on).
4). Delete the preloaded audio files for testing purpose from the built-in memory, or empty the micro SD card if it has other
files inside.
5). Go back to the folder and select all of the 9 audio files in the folder.
6). Right click on the first file (001.mp3) and choose "Send to removable disk" or “Send to USB flash drive”.
7). This will send the 9 audio files to the on-board flash memory or micro SD card one by one in a correct order.