
focusrite.com Tell the world 4
Hardware features
Vocaster Two allows you to connect either
one or two high quality microphones to a
computer running macOS or Windows: this
will let you achieve a much better audio
recording than you would get by using the
microphone built into most laptops or tablets.
The microphone inputs accept a range of
microphone models, including both dynamic
and condenser types. If you are using a
condenser microphone, Vocaster Two can
provide the phantom power (48V) it needs to
operate.
The microphone signals route to your
computer’s audio recording software via the
USB-C connection at up to 24-bit resolution,
48 kHz sample rate. (24-bit/48 kHz is the
standard for most podcasts.)
If you don’t already have recording software,
we recommend Hindenburg. This is included
in the software package available to you free
of charge as a Vocaster owner.
A 3.5 mm jack socket allows you to connect
a phone to Vocaster Two: alternatively, you
can connect to the phone using Bluetooth. A
second, similar socket allows connection to a
video camera.
The phone connector is a TRRS: TRRS means
you get audio both in and out of the phone,
so you can record audio from the phone,
and the phone can also hear the other audio
sources you are recording to your show.
Vocaster Two has outputs for both
headphones and speakers: two front panel ¼’
TRS sockets for host and guest headphones,
and two rear panel ¼’ TRS sockets for
connection to speakers.
The top panel has a multi-function knob for
controlling the gain of either microphone,
and two separate knobs - one for each pair of
headphones - for setting listening level.
The ‘Host’ control also sets the volume in
external monitor speakers, if you are using
them. The microphone control is surrounded
by two halo meters showing the microphone
signal level and a separate halo displaying the
gain setting.
Two sets of three illuminated buttons select
the microphone input’s Auto Gain function,
activate its Enhance feature and mute each
microphone.
There are also LEDs to show when phantom
power, a Bluetooth connection, and the USB
connection are active.
OVERVIEW