FODSPORTS M1-S PRO User manual

PRO
PRO

Attention
Thank you for purchasing FODSPORTS M1-S PRO bluetooth
stereo headsets. For best experiences, please read manual
before use.
Sound volume warning
Long period or too loud may hurt hearing ability.
Disassemble or modification
The M1-S PRO is precisely made in the factory. Any
disassemble or modification may damage the device. Please do
not tear any of the safety regulation and serial number sticker
from the device, that will void warranty. Please contact us at
[email protected] if needed.
Warranty:
In normal use, we offer one year warranty from the date of
purchase. Any disassemble, modification, will void warranty.
1
English

1.Outlook (e.g. M1-S PRO)
Volume -
Intercom
Volume +
Function
Speaker/microphone
assembly insert hole
AUX In
Data & power cable insert hole
Functions
Cellphone Function
Device Pair Up
Music Function
Intercom Function
Special Function
Switch On : When device is off, press intercom
+ function at same time for 3 seconds.
Answering call : Short press function once.
Hangup call : After call, short press function
once.
Refuse call : Long press function button for 2
seconds.
Redial : Short press function button twice.
Volume up : Press volume + while talking.
Volume down : Press volume - while talking
Switch manual/automatic answering calls :
While in standby, press and hold the intercom
button and volume “+ ”“- ”button at the same
time for 3 seconds.
Pairing mode : When device is on, long press function for
5 seconds.
Play : When device is on, short press volume + twice.
Switch intercom on : when device on : short press
intercom once
Update mode : Plug in the Data & power cable, press
volume - and function at same time for 5 seconds.
Memory clear : When device is on, press volume+ and
function at same time for 5 seconds.
Switch off : when talking, short press intercom once
Volume up : when talking, short press volume + once
Volume down : when talking, short press volume -once
Pause : When music playing, short press volume + twice.
Volume up : When playing music, short press volume +
once.
Volume down : When playing music, short press volume
- once.
Play previous : When playing music, long press volume +
for 2 seconds.
Play next : When playing music, long press volume - for 2
seconds.
Search mode : When device is on, long press intercom
button for 5 seconds.
Switch Off : When device is on, press intercom
+ function at same time for 3 seconds.
Power Detect : When device is on, short press
volume - and volume + at same time.
Remark, pairing mode is for pairing up to other devices like
cellphone, gps.... Search mode is for pairing up with other
M1-S PRO.
Voice control function (Only If your cellphone
is equipped) : Short press function button once.
Switch on external wired devices such as
speed detector... : when device is on, long
press volume - and volume + at same time for 3
seconds.
PRO
2

PRO
2.Recharge
Recharge
Data and power cable insert hole(socket)
Low power notification
For first time use, please recharge the device until red light is off.
1.Use data and power cable plug to the socket, connect to power source.
*Bike usb chargers are not recommended, unstablized circuit may damage
the device.
2.When connecting to power source, red light appears in function button.
When recharge complete, red light is off. Complete recharge is about 2
hours.
When power lower than 10%, Red light flash in the function button and voice
message will remind power lower than 10%, please recharge immediately.
PRO
3
English

Power Detect Function
M1-S PRO has power detection function, when device is on, short press
volume - and volume + at same time. Recorded voice message will remind
you.
Voice control function( only if your cellphone is equipped): short press
function button once
Switch on external wired devices such as speed detector...: when device is
on, long press volume - and volume + at same time for 3 seconds.
Power over 90%
Power over 50%
Power lower 50%
Power lower than 10% please recharge immediately
PRO
4

PRO
PRO
3.On / Off
Switch On
Switch Off
About 3 sec
1. Switch on : long press function and intercom button at same time for
3 seconds, until blue light flash in function button. Voice message says
“welcome to the Fodsports bluetooth communication system”.
2. Switch off : When the device is on, long press function and intercom
button at same time for 3 seconds, until red light flash in function button.
The device will detect power and voice message will says “power off”.
About 3 sec
PRO
PRO
5
English

PRO
Pairing Mode
4.Pair Up To Different Devices
M1-S PRO can pair to different bluetooth devices.
When device is on, long press Function Button.
Pairing mode, red and blue light flash
Voice message says pairing.
6

PRO
Search Mode
When device is on, long press intercom button.
Search mode, red and blue light flash 0.5 second
between each flash, one second between each flash.
It’s search mode, voice message shows “Searching” sound.
7
English

Switch on cellphone bluetooth, chose
FODSPORTS M1-S PRO, the pairing is
complete.
Voice message will also say pairing
complete.
5.Pairing With Cellphone
About 5 sec
Name
Use for
Paired Device
Phone audio
Media audio
FODSPORTS M1-S PRO
Remark, when pairing complete, please check both cellphone
audio and media audio are all chosen, otherwise call or music
can't be processed.
When device is on, long press
function
Red and blue light flash in the function
button, entering pairing mode
PRO
PRO
PRO
8

PRO
PRO
Answer/Hangup
Redial
Press to Answer/Hangup
Short press function button twice
M1-S PRO is set to automaticity answer incoming calls, when
incoming calls, beside rings, blue light flashes. Push FUNCTION
BUTTON to answer and push function button to hang up.
6.Telephone Function
When talking, press VOLUME + and VOLUME - to adjust volume.
When the device is on, short press function button twice, will redail,
blue light flashes.
*Only redial last call out number
9
English

Short press function button once
Automatically switch on voice
command input function
7.Voice Command
When your M1-S PRO is paired up with your cellphone, when both
device are on, short press function button once, will automatically
switch on the voice command function
*Cellphone must be equipped with this function
PRO
10

Short press volume+twice
Long press volume+ for 2 seconds
Long press volume- for 2 seconds
Play/Pause
Previous
Next
8.Music Selections Functions
Play music
When cellphone and M1 -S paired up, when both devices are on,
short press volume+ twice, will play music.
Pause
When playing music, short press volume + twice, will pause.
Long press volume+ for 2 seconds, will play previous music in your
cellphone music list.
Long press volume- button for 2 seconds, will play next music stored
in your cellphone music list.
PRO
PRO
PRO
11
English

PRO
9.Wire Connecting
Long press volume
-
，volume+ for 3 seconds.
M1-S PRO equipped with wire connection function in order to
connect to devices without bluetooth. As long as the device is
connected by 3.5mm aux out, all can transmit voice signal to M1 -S
PRO.
When device wire connected by 2.5mm to 3.5mm cable to M1-S
PRO , long press volume+ and volume- for 3 seconds to switch on
the connection.
* When wired mode is switched on, it will keep it on until switch off
the M1-S PRO.
Radio GPS Speed detector Music player
Wire connecting to
other device which
is not equipped with
bluetooth, any
devices with 3.5mm
connector.
12

10.Operating Scenario 1:
One person use, pair to cellphone + bluetooth gps device +
bluetooth speed detector
*After M1-S PRO paired with gps, if don't switch off gps's
bluetooth, its will interference the pairing when pairing to
speed detector. Recommended to switch gps bluetooth off,
after pair up to detector, switch the bluetooth back on.
A first of all, pair up gps and cellphone.
Pair up M1-S PRO with gps, after paired, please
switch off bluetooth function in the gps.
Lastly, pair up M1-S PRO with bluetooth
speed detector, after paired, switch on gps
bluetooth function.
PRO
PRO
13
English

11.Operating scenario 2:
Two person intercom, and pairing to cellphone + bluetooth
gps + speed detector or radio
Passenger Procedure:
Step 1: switch rider headset to search mode, passenger headset to
pairing mode. When both headset stop red+blue light flashes, they
are paired.
Step 2: switch rider headset to pairing mode, cellphone search this
M1-S PRO and pair it up.
Step 3: keep riders headset in pairing mode, use bluetooth gps to
search rider's headset and pair it up.
Step 4: use 2.5mm to 3.5mm aux in to connect speed detector or
radio to M1 -S PRO , and switch M1-S PRO to Wire Connecting, all
audio integrade complete.
Please read STEP 9. For Wire Connecting.
Rider Cellphone Rider Headset Passenger Headset
Rider GPS Rider Speed Detector
PRO PRO
14

Two man intercom, rider using cellphone + bluetooth gps,
passenger using bluetooth Speed detector
12. Operating Scenario 3:
Rider headset Passenger Headset
Rider GPS Rider cellphone Rider speed detector
Pairing Procedure
Step 1: switch rider headset to search mode, passenger's headset
switch to pairing mode, when red and blue light stop flash, intercom
pairing complete. At same time instantly switch on intercom.
Step 2: Set rider headset to pairing mode, use cellphone to search
rider's headset to complete pair up.
Step 3: set rider's headset to pairing mode, use bluetooth gps to
search rider's headset and complete.
Step 4: set passenger's headset to pairing mode, use bluetooth
speed detector to search passenger headset and complete pair up.
PRO PRO
15
English

Multiple intercom pairing procedure
13. Multiple Intercom
*Numbers of device which the headset can be paired
8 x M1-S PRO (A, B, C D), multiple intercom connections, the
connection will occupy channels, thus only unit A can connect to the
other two bluetooth devices, the others B, C, D can only connect to
one bluetooth device.
Search Mode (Slow flash)
Search Mode (Slow flash)
Search Mode (Slow flash)
Pairing Mode (Fast flash)
Pairing Mode (Fast flash)
Pairing Mode (Fast flash)
16

M1-S PRO equipped multiple intercom function, support 8 units talk
same time,but recommended 4-6 units,pairing procedure as follow.
Step 3: When C D units on power on status,Long press unit C
intercom button, then long press unit D function button. When blue
light on both units, pairing complete.(You should press intercom
button on B C units if you need 4 units talk same time,then 4 units
will light on blue same time.Or you need to press intercom on D
unit to end the talking if you need to pair with more than 4 units)
Pls repeat above steps if you need to pair with 5 or 6 or 7 or 8 units.
Four units pairing complete.
*Interruption
In multiple intercom mode, if there is an incoming call caused one of
unit away from the connection. After call, will reconnected
automatically. If interruption is caused by distance or bad signal.
Please press intercom button to reconnect.
Step 1: switch on both A and B unit, long press A unit intercom
button to search mode, Then long press unit B function button to
pairing mode. When blue light on both intercoms, pairing
complete.(You should press the intercom button on B unit to end
the talking if you need to pair with more than 2 units,in order to
new pairing later)
Step 2: When B C units on power on status,long press unit B
intercom button to search mode, Then long press unit C function
button to pairing mode. When blue light on both units, pairing
complete.(You should press intercom button on B units if you need
3 units talk same time,then 3 units will light on blue same time.Or
you should press intercom button on C unit to end the talking if you
need to pair with more than 3 units)
Now A and B unit pairing complete.
Three unit pairing complete.
17
English

Multiple intercom reconnect procedure
M1-S PRO will remember paired units. But after switch off
and want to reconnect again, please follow the procedure.
Step 1: switching off all four units and all bluetooth device
connected to the headset.
Step 2: switch on C and D unit, press C unit intercom button
to connect to D unit.
Step 3: switch on B unit, press B unit intercom button to
connect to C and D unit.
Step 4: switch on A unit, press A unit intercom button to
connect to B, C and D unit. After all four unit reconnected,
switch on original connected bluetooth devices.
PRO PRO PRO PRO
18

Q1 : No sounds from one or two side speaker.
A1 : Check device plug, needs to firmly connected.
Q2 : Can it be recharged from bike USB charger
while riding?
A21：Not recommended, unstablized power source
will cause damage on internal circuit, may cause
unable to recharge/can't fully charged/can't switch on.
A22 : Power bank is a good choice.
Q3 : When using radio, not transmission or
continuous transmission.
A3 : Pls check whether plug the 2.5mm pin deeply
enough.this pin built in waterproof parts,It is easily
misunderstand it have been pluged well because of a
little resistance.
Q4 : New device can't switch on.
A4 : Recharged at least 30mins before use.
14.Q&A
19
English