TCS IVX9001-0140 User manual

User manual
Video indoor station
IVX9001-0140

2
Table of contents
Safety instructions ................................................................................3
Device overview.....................................................................................3
Indicastion and operating elements.....................................................4
Operation ...............................................................................................5
Accept a call.........................................................................................5
Send a call............................................................................................7
Video surveillance.................................................................................9
Switch lights and send control functions...........................................10
Automatic function............................................................................10
Setup Intercom.................................................................................11
Cleaning...............................................................................................12
Information on disposal......................................................................12
The video indoor station was installed and setup by:........................12

3
Safety instructions
Do not modify the door communication system on your own!
In case of errors or faults please contact your qualified electrician.
Device overview
Menu button
Loudspeaker
Microphone
Image button
Call OFF
button
Function key
Screen
LED red
Door release
button
Speech button
(sensor key)
LED green
Sensor keys

4
Indication and operating elements
Description
Function
Screen
display of the video image
menu display, OSD
LED red
is ON: call OFF is activated (ring tone mute)
blinking: indication voice channel is busy
LED green
is ON: when a voice connection is established,
in case of active call diversion and active door
release automatic
Call OFF but-
ton
ring tone mute (if no voice connection is estab-
lished)
end speaking
back in stand-by mode
Menu button
open the main menu
close the main menu
back to the previous menu
Image button
switch ON the image
switch image between different cameras (if
available)
switch OFF the image
upwards in the OSD menu
change parameter in the OSD menu
Function key
sending control function 8
to call the central, if the IVX9001-0140 is config-
ured for systems with central
downwards in the OSD menu
change parameter in the OSD menu
Door release
button
open the door during a voice connection
to call the central, if the IVX9001-0140 is config-
ured for systems with central
Speech button
accept a call (door call or internal call), activate
speaking
end speaking
confirm, store the parameter selection

5
Operation
Accept a call
Door call
from a
video
front-
door sta-
tion
When a call from a video
front-door station comes
in, the screen is activated
automatically and the vid-
eo image is displayed.
Shortly press the speech
button , to speak with
the person in front of the
door.
When a voice connection
is established, the LED 2
is ON.
Shortly press the speech
button , to end the voice
connection.
Shortly press the door
release button , to
open the door.
Door call
from an
audio
front-
door sta-
tion
When a door call from an
audio front-door station
comes in, a ring tone
sounds at the indoor sta-
tion, no video image is
displayed.
Shortly press the speech
button , to speak with
the person in front of the
door.
Shortly press the speech
button , to end the voice
connection.
Press the call OFF button
, to end the voice com.
Speaking End
End
Remaining time

6
Internal
call from
another
indoor
station
When an internal call from
another indoor station
comes in, a ring tone
sounds at the indoor sta-
tion, no video image is
displayed.
Shortly press the speech
button , to speak with
the person at the other in-
door station.
Shortly press the speech
button , to end the voice
connection.
Press the call OFF button
, to end the voice com.
Floor call
When a floor call (from a
floor door) comes in, short-
ly press the speech button
, to speak with the per-
son at the floor door.
Shortly press the speech
button ,to end the voice
connection.
If the floor door release
function is activated, press
the door release button
, to open the floor door
(possible only within 35 s
after the call came in).
If the floor video function is
activated, the video image
is displayed.
Open End
Floor door

7
Call from
the cen-
tral
When a call from the cen-
tral comes in, shortly press
the speech button , to
speak with the person at
the central.
Shortly press the speech
button , to end the voice
connection.
Send a call
Calling a
video
front-
door sta-
tion
In stand-by mode: press
the speech button , to
establish a voice connec-
tion to the front-door sta-
tion, which was connected
last.
Shortly press the speech
button , to end the voice
connection.
Next End
Front-door

8
Send an
internal
call
Press the menu button
in stand-by mode to call up
the main menu.
Press the image button
or the function key , to
select the menu Internal
call.
If an internal call was con-
figured, e.g. the room
number and the serial
number of the call destina-
tion is displayed on the
screen.
Select the call destination
(e.g. facility manager)
Press the speech button
, to call another indoor
station.
If no internal call is deter-
mined:
Indication: no internal call.
Call the
central
Press the door release
button or the function
key (according to the
configuration), to call the
central.
When a call comes in at
the indoor station, press
the speech button , to
speak with the person at
the central.
Shortly press the speech
button , to end the voice
connection.
Main menu
1 Internal call
2 Lights and control
3 Automatic function
4 Setup Intercom
Off Up Down OK
Internal call
No internal call
Off Up Down OK
Internal call
01: Facility SN 12808
02: Ro 12 SN 54987
Off Up Down OK

9
Video surveillance
Video
sur-
veillance
Press the image button
.
If several video front-door
stations or cameras are
connected, switch between
video front-door stations /
cameras by pressing the
image button again.
Press the call OFF button
, to switch OFF the im-
age.
The image is switched
OFF automatically after
the set image switch time
is up.
Floor
video
To display the floor video
image, press the image
button (if the floor vid-
eo function is activated).
Video
front-
door
station
Press the image button
, to switch to the image
of the video front-door sta-
tion.
Next End
Front-door
Next End
Front-door
Next End
Floor door

10
Switch lights and send control functions
Lights
and
control
Press the menu button
in stand-by mode to call up
the main menu.
Press the image button
or the function key , to
select the menu Lights and
control.
Press the image button
or the function key , to
select a function (send
control function 8, 9, or 10
or light switch function).
Press the speech button
, to trigger the control
function or to switch the
lights.
Automatic function
Automat-
ic func-
tion
(floor door
release,
call diver-
sion)
Press the menu button
in stand-by mode.
Press the image button
or the function key , to
activate/deactivate the
function.
Press the speech button
, to trigger the control
function or to switch the
lights.
Note:
Store the settings by pressing the
speech button .
Main menu
1 Internal call
2 Lights and control
3 Automatic function
4 Setup Intercom
Off Up Down OK
Automatic function
Floor door: Deactivated
Call diversion: Deactivated
Off Up Down OK
Lights and control
1 Control function 8
2 Control function 9
3 Control function 10
4 Light switch function
Off Up Down OK