FOM HIGH FIVE User manual

P66631_01
BOOKCASE
HIGH FIVE
ASSEMBLY INSTRUCTIONS

ASSEMBLY PARTS
Keep this instruction manual for future references. Read the instructions carefully before
assembly.
Xx5
Hx2 Kx4Tx2
Ix25Cx1Fx1
Ex5
Mx2
Nx26 Sx6
Please use this tool “M” to disassemble “N” and “S”
clips, placed on the uprights, and also the clips
under the shelves.
Rx4
x2

WARNINGS
Adjust feet to reach maximum stability of the bookcase.
Fix the bookcase to the wall before loading the shelves.
Maximum loading capacity per shelf: 55 lbs. Weight equally distributed.
After assembly is completed there may be extra small parts, you may dispose of
these as they are not needed. The only exception is clip R, to be used for mixed
of the material.
Do not hang from or lean on the bookcase and keep out of reach of children.
WARNING! SUFFOCATION HAZARD. Keep plastic bags away from babies and children.
Do not place heavy and bulky objects on the top layer of the bookcase, especially if not yet
Do not place hot objects in direct contact with the shelves, it may cause deformation of the
surface.
Keep away from direct and indirect heat sources.
Do not use this product in direct contact with food.
on the surface if left in direct contact with the shelf for a long period.
Care instructions: clean with warm water and damp cloth only. Do not use cleaning
detergents.
This product is for indoor use only.
Warranty: 10 years
(Note: if there is a request of replacement of a FOM Bookcase belonging to a “limited
edition” color selection, not in production anymore, the product could be substituted with a
different color option)
www.myfom.com

WARNING
standalone shelf, please go to myfom.com for assembly videos.
01
02

0202
If the stand-alone
bookcase was previously
please start with
removing the wall hanger
and the related screws.
C
WARNING
Start to disassemble the stand-alone bookcase to connect the add-on.
01

Open clips and remove
the 2 uppershelves
0103

0104
M
N
M
Please use this tool “M” to disassemble “N” and “S” clips, placed on
the uprights, and also the clips under the shelves.

N
M
0105

In order to stabilize the bookcase, please
adjust the feet by rotating the "T" tool all the
way down or slightly unscrew it, taking into
L
Open clip underthe
shelf toremove the
feet (L) onthe
right side
L
01
02
06
07
T
H
x2

L
H
H
H
Connect the feet (H) tothe
shelf and then close only
the clips underthe shelf
01
09
08
Attention: keep all the
clips fully open when
connecting the shelf.

x5
E
I
E
10
11

Nx4Repeat step 10-11-12 for all shelves
E
E
L
N
N
N
N
click
12
13
Attention: keep all the
clips fully open when
connecting the shelf.

A
K
N
S
N
S
S
S
14
S
N
click
N
S
click

x16
15
Attention: keep all the
clips fully open when
connecting the shelf.

S
N
x4
S
S
S
S
N
N
click
16

x16
17
Attention: keep all the
clips fully open when
connecting the shelf.

S
S
S
S
N
N
M
M
M
M
x4
click
N
S
x4
18
M
X

Adjust feet to reach stability of the bookcase
19

C
x2 x2
x2 F
H
x2
X
X
X
W
X
W
x2
X
20
Mount the bookcase to the wall
Wall mounting tools not included

Made in Italy for FOM by
Keter Italia S.p.A. - Via Marche, 12, 31045 Motta di Livenza (TV) - ITALIA
www.myfom.com