FOM TRIPLET User manual

P66629_01
ASSEMBLY INSTRUCTIONS
BOOKCASE
TRIPLET

ASSEMBLY PARTS
Keep this instruction manual for future references. Read the instructions carefully before
assembly.
Xx3
Hx2 Kx2Tx2
Ix15Cx1Fx1
Ex3
Mx2
Nx16 Sx4
Please use this tool “M” to disassemble “N” and
“S” clips, placed on the uprights, and also the
clips under the shelves.
x2
Rx4

WARNINGS
Adjust feet to reach maximum stability of the bookcase.
Fix the bookcase to the wall before loading the shelves.
Maximum loading capacity per shelf: 55 lbs. Weight equally distributed.
After assembly is completed there may be extra small parts, you may dispose of
these as they are not needed. The only exception is clip R, to be used for mixed
of the material.
Do not hang from or lean on the bookcase and keep out of reach of children.
WARNING! SUFFOCATION HAZARD. Keep plastic bags away from babies and children.
Do not place heavy and bulky objects on the top layer of the bookcase, especially if not yet
Do not place hot objects in direct contact with the shelves, it may cause deformation of the
surface.
Keep away from direct and indirect heat sources.
Do not use this product in direct contact with food.
on the surface if left in direct contact with the shelf for a long period.
Care instructions: clean with warm water and damp cloth only. Do not use cleaning
detergents.
This product is for indoor use only.
Warranty: 10 years
(Note: if there is a request of replacement of a FOM Bookcase belonging to a “limited
edition” color selection, not in production anymore, the product could be substituted with a
different color option)
www.myfom.com

WARNING
standalone shelf, please go to myfom.com for assembly videos.
01
02 03

02
WARNING
Start to disassemble the stand-alone bookcase to connect the add-on.
01
If the stand-alone
bookcase was previously
please start with
removing the wall hanger
and the related screws.
C

Open clips and remove
the 2 uppershelves
03

M
N
N
N
S
S
M
Please use this tool “M” to disassemble “N” and “S” clips, placed on
the uprights, and also the clips under the shelves.
04

In order to stabilize the bookcase, please
adjust the feet by rotating the "T" tool all the
way down or slightly unscrew it, taking into
L
Open clip underthe shelf
to remove the feet (L) on
the right side
L
T
H
x2
06
05

H
H
H
L
Connect the feet (H) tothe
shelf and then close only the
clips underthe shelf
Attention: keep all the clips
fully open when connecting
to the shelf.
08
07

x5
I
E
E
10
09

Nx4
Repeat step 9-10-11 for all shelves
E
E
L
N
N
N
N
click
12
Attention: keep all the clips
fully open when connecting
the shelf.
11

13
KA
N
N
S
S
S
S
S
N
N
S
click
click

Attention: keep all the clips fully open when connecting the shelf.
14
x16

15
S
S
S
S
N
N
N
M
M
M
M
click
N
S
x4 x4
X
M

16
Adjust feet to reach stability of the bookcase

17
C
x2 x2
x2 F
H
x2
X
X
X
W
X
W
x2
X
Mount the bookcase to the wall
Wall mounting tools not included
Made in Italy for FOM by
Keter Italia S.p.A. - Via Marche, 12, 31045 Motta di Livenza (TV) - ITALIA
www.myfom.com