Noble House Home Furnishings Loveseat User manual

Assembly Instructions
Loveseat
Caution: You should read this carefully before proceeding
Caution: This Loveseat is NOT a TOY.
Keep your child / children at bay in the process of assembly.
Whenever moving or lifting the Loveseat and to prevent any damage to it, two adults may be
needed to execute these actions.
Please look in the Table Top for hardware packs.
Noble House Home Furnishings LLC Page 1 of 6

Label Picture Description QTY
C Backrest Panel 1
D Left Leg Panel 1
E Right Leg Panel 1
F Support Bar 1
G Seat Panel 1
HSeat Cushion 1
IBack Cushion 2
Label Picture Description QTY
④Bolt
(M6x30mm) 5
⑤Bolt
(M6x45mm) 5
⑥
Screws
(M6x35mm)
7
⑦
Sleeve Nut
(M6x15mm)
5
⑧Allen Key 2
Parts List
Hardware
Noble House Home Furnishings LLC Page 2 of 6

Step 1
Before Beginning Assembly:
Assembly Preparation
This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give
you an overview of the Loveseat parts, the above picture is provided to help you put the
various parts into perspective. Please read through the instructions below to familiarise
yourself with the parts and steps before assembly.
Unpack and place all parts on a clean, non-marring surface.
Assembly Steps
Overview
FRONT FACING
Back
Cushion (I)
Seat
Cushion (H)
Right
Leg
Panel
(E)
Seat Panel
(G)
Backrest
Panel (C) Left Leg
Panel (D)
Support Bar (F)
Noble House Home Furnishings LLC Page 3 of 6

Step 2
Step 3
Step 4
With assistance from your adult partner(s), attach the Support Bar (F) to the assembled
frame in step 3 using Bolts(⑤) and the Allen Key(⑧) as shown above.
Place the Backrest Panel (C) standing up as shown in picture above, onto a clean, soft
surface to avoid any scratches or damage to the product.
With assistance from your adult partner(s), Attach the Left Leg Panel (D) to the Backrest
Panel (C) using Bolts(④), Sleeve Nuts(⑦) and the Allen Key(⑧) as shown above.
Do not fully tighten the Bolts at this time.
Attach the Right Leg Panel (C) to the pre-assembled in step 2 using Bolts(④), Sleeve
Nuts(⑦) and the Allen Key(⑧) as shown above.
Do not fully tighten the Bolts at this time.
Noble House Home Furnishings LLC Page 4 of 6

Step 5
Step 6
Place the Seat Cushion (H) and the Back Cushions (I) onto the Loveseat,
Your Loveseat is ready to be used.
This Loveseat can only be used on a flat, level surface.
Attach the Seat Panel (G) into the Loveseat as shown in picture above.
Affix the Seat Panel (G) to the Loveseat frame using Screws(ˆ⑥) and the Allen Key(⑧).
Note: Insert the Screws(ˆ⑥) from the inside to the outside of the Seat Panel (G)
DO NOT FULLY TIGHTHEN SCREWS.
Turn the Loveseat right side up.
Inspect the Loveseat and make sure all parts are adequately connected.
Carefully sit on the Loveseat. This pressure will help align all parts at all joints.
In a sequential manner, tighten all Bolts and Screws at all joints.
Noble House Home Furnishings LLC Page 5 of 6

Noble House Home Furnishings LLC Page 6 of 6