Fondovalle Shape Shower tray 150 User manual

Shower tray 150

Tools needed
3
1
4
2
Pencil Tape
measure
Spirit level Silicone
Assembly instructions
Trowel

The simple warnings shown below ensure correct installation of the shower tray,
ensuring the tray a long life and compliance with the warranty conditions.
Preparation
Before tting the shower tray permanently, we recommend you t the drain pipe into
which the shower water will ow, then position the shower tray above this and check
that everything ts perfectly.
Now place the tray directly on top of the drain pipe to make sure the upper drain parts
t: Only screw or fasten the cover to the shower tray once installation is complete.
Now prepare a lean mortar bed as a base for the shower tray.
Installation
Position the shower tray taking into account the thickness of the wall tiles and check
it is level using a spirit level (N.B. rst of all, level out the surfaces where the shower
enclosure will be resting). Always keep a distance of at least 4 mm between the upper
edge of the shower tray and the wall tiles.
Once the mortar has set, seal everything with white mould-proof silicone
or elastic mortar.
1
2
3
4
Use protective gloves
RECOMMENDATIONS

Ceramic shower tray.
Type
Sloping with pop-up plug and trim base
Included
SILFRA AD 200 stainless steel drain
FAO-approved crate packaging
height: 452 mm
size: 1060X1620 mm
weight: 100 kg
Shower tray dimensions
www.fondovalle.it | [email protected]
1500
672
64
64
800
70