Forest CORNER SLEEPER BENCH User manual

Making British gardens great
CORNER SLEEPER BENCH
INSTRUCTIONS (1200x1200mm)
ISSUE: 0121
Tape Measure
We recommend using the following tools (not supplied):
Drill & 2mm
Drill Bit
Rubber Mallet
FIXING PACK CONTAINS:
4 x 60mm Screws
QTY: 24
Forest Garden, Oak Drive, Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
REMINDER
Always pre-drill before
screwing.
IMPORTANT
Assembly requires 2+
adults.
Missing something or need more information?
Call our aftersales team on
0333 321 3142
Visit our website for spare instructions and
more information
www.forestgarden.co.uk
Pozidrive
Screwdriver
12
Position the legs as shown above. Ensure there is a
End Leg at each side, with the battens attached facing
inwards. Place the Corner Leg in the middle. Ensure the
battens attached to the legs are positioned lowest to
the ground as shown above.
Position and secure the Front Bench Supports
(828mm) and Back Bench Supports (945mm) to the
End Legs and Corner Leg Battens.
END LEG
6 x 100mm Screws
QTY: 8
END LEG
FIXING PACK CODE: CORNBEN12FPPLEASE KEEP PLASTIC BAGS AND SMALL PARTS AWAY FROM CHILDREN
CORNER LEG
BACK BENCH SUPPORT (945mm)
FRONT BENCH SUPPORT (828mm)
60MM
SCREWS

3 4
Place the Seats on top of the legs. Ensure the End
Legs slit into the notches provided. The Seats will rest
on top of the Corner Leg.
Position the Corner Leg as shown above. Ensure the
Central Leg is centralised between pre-drilled holes on
the batten, before securing into place.
Ensure the End Legs are ush to the Seats. Fix the End
Legs into place using 4 x 60mm screws on the outside
and 4 x 100mm screws on the inside per End Leg.
Position the Corner Leg as shown in the Central Leg
Position. Fix into place, into the pre-drilled holes
provided using 4 x 60mm screws each side.
HEALTH & SAFETY
We strongly recommend that PPE (Personal Protective Equipment) is used throughout your build to ensure you are protected from
any potential health and safety risks. Do not exempt yourself from wearing PPE.
60MM
SCREWS
60MM
SCREWS
CENTRAL LEG POSITION
SEAT LH
SEAT RH
100MM
SCREWS 100MM SCREWS
60MM
SCREWS
5
CHECK & TIGHTEN ALL FIXINGS APPLIED TO THE PRODUCT ON A REGULAR BASIS

CHECK YOU HAVE ALL YOUR PARTS.
(The parts do not have codes on them. They are listed below should you need to order one.)
The components provided may be heavy. Please lift with caution and with a minimum of 2 people.
Label Part Code Description No.
ASB35LEG End Leg 415x350x95mm 2
BSB35CRLEG Corner Leg 385x350x130mm 1
C70350828AI45PPT Front Bench Support 828x70x35mm 2
D70350945AI45PPT Back Bench Support 945x70x35mm 2
ESB35120AI45TOPRH Seat RH 1200x350x95mm 1
FSB35120AI45TOPLH Seat LH 1200x350x95mm 1
Corner Double Sleeper Bench 1200x1200mm (CORNBEN12)
TREATED TIMBER CONTAINING A BIOCIDAL PRODUCT
CONTROL OF WOOD DESTROYING ORGANISMS
Active Ingredients - Propiconazole, Tebuconazole, IPBC, Permethrine, Benzyl-C12-16-Alkyldimethyl Chlorides. (Dip Treated)
Basic Copper Carbonate, DDA Carbonate, DDA Chloride. (Pressure Treated)
Wear gloves when handling. Avoid inhalation of sawdust. Do not use in contact with drinking water or food. Do not use for animal
bedding or in sh ponds. Dispose of treated wood responsibly.
Use the labelled components to help identify the part code and description.
ABC D
E F