Furniture of America Heidelberg CM3498PT User manual

1 / 13
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 21-04-05
2 - People
(Included)
Allen Wrench
Recommended
MODEL #
CM3498PT
Phillips
Screwdriver
(Not Included)

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ X13

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ 13

4 / 13

TABLE
CM3498PT
5 / 13
#1 1pc #2 1pc
#A 23pcs
Table Top Left Frame
Bolt Ø1/4" x 1-3/4" Flat Washer
Ø1/4"x19mm
#C 23pcs #D 2pcs
#3 1pc
#4 1pc
Right Frame
Bottom Panel
#5 1pc
Back Panel
#6 1pc
#7 2pcs
Bottom Divider
Door(L&R)
#8 1pc #9 2pcs
Support Leg
30x30x104mm Shelf
#B 23pcs
Lock Washer
Ø1/4"x13mm Left door hinge

#E 2pcs
Right door hinge
6 / 13
#F 24pcs
Screw #3 x 15mm Screw #3 x 12mm
#H 8pcs
#K 2pcs
#I 2pcs
Handle
Shelf Support
#G 8pcs
#M 16pcs
Wooden Dowel
Ø8 x 30mm
#L 3pcs
#1
#9
#5
#2
#3
#4
#8
#7
#7
#6
#N 1pc
Allen Wrench M4
Bolt Ø5/32" x 22mm Screw #8 x 25mm
#9

7 / 13
CM3498PT is packed in 2 cases
Carton Disignation Part Hardware
CM3498PT-1
Top Table #1
#A x 23pcs
#B x 23pcs
#C x 23pcs
#D x 2pcs
CM3498PT-2
Bottom Panel #4
#5
#8
Back Panel
#E x 2pcs
#F x 24pcs
#G x 8pcs
#2
#3
#6
#7
Support Leg
(30x30x104mm)
Left Frame
Right Frame
Door L&R (2pcs)
Bottom Divider
#9
Shelf (2pcs)
#H x 8pcs
#I x 2pcs
#K x 2pcs
#L x 3pcs
#M x 16pcs
#N x 1pc

ASSEMBLY INSTRUCTIONS
1
8 / 13
Hardware #A x2pcs
Hardware #B x2pcs
Hardware #C x2pcs
2
Part #5 x1pc
Part #6 x1pc
#N
#A
#B
#C #6
#5
#M
#M
#N
#A
#B
#C
Hardware #M x8pcs
Hardware #A x3pcs
Hardware #B x3pcs
Hardware #C x3pcs
Part #4 x1pc
Hardware #M x4pcs
#4
Align panel (#6) to panel (#5),
then secure by using bolts (#A)
with washers (#B,C). Insert
dowels (#M) onto panels (#5,6).
Align panel (#4) to the unit, then
secure by using bolts (#A) with
washers (#B,C). Insert dowels (#M) to
panel (#4).

#8
ASSEMBLY INSTRUCTIONS
3
Hardware #L x3pcs
4
Part #8 x1pc
Hardware #A x4pcs
Hardware #B x4pcs
Hardware #C x4pcs
Part #2 x1pc
#L
#N #A #B#C
#2
#3
Part #3 x1pc
9 / 13
#M
Hardware #M x4pcs
Secure by using screws (#L).
Attach support leg (#8) onto
the unit.
Align side panels (#2,3) to the
unit, then secure by using bolts
(#A) with washers (#B,C).
Insert dowels (#M) onto panels
(#2,3).

#N #A #B #C
ASSEMBLY INSTRUCTIONS
5
6
Part #1 x1pc
10 / 13
#N
#A
#B
#C
Hardware #A x10pcs
Hardware #B x10pcs
Hardware #C x10pcs
#1
#N
#A
#B
#C
Hardware #A x4pcs
Hardware #B x4pcs
Hardware #C x4pcs
Secure by using bolts (#A) with
washers (#B,C).
Align panel (#1) to the unit, then
secure by using bolts (#A) with
washers (#B,C).