FURNITUREBOX MOON CHAIR User manual

MOON CHAIR
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips, advice
and assembly video or visit
furniturebox.co.uk/club/moon-chair
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 100Kg
45 MINUTE
BUILD

Follow us on Instagram
@furniturebox_uk
Construct your furniture on a nice at, soft surface like a carpet, rug, or the
lawn, to avoid any bumps and scratches. First, lay out all your pieces and
check you have all the items listed on the inventory.
STEP 1
Connect the two halves of the seat [A] and [B]. Use bolt [E] + 1x washer [G] on
one side of the holes and secure with 1x washer [G] + 1x nut [F] on the other
side of the holes. Do this 4 times at the locations shown in the illustration.
Thread bolts from seat section [A] down towards bottom section [B]. Don’t
fully tighten the bolts until all seat components are in place.

www.furniturebox.co.uk
FULL ASSEMBLY INSTRUCTIONS
STEP 2
Carefully, and with help, place the seat on the base [C]. Ensure that the two
black dots on the seat frame and the base line up before securing anything.
Once aligned, connect seat to base using 1x bolt [D] + 1x washer [G] down
from top to bottom, and secure with 1x washer [G] + 1x nut [F] on the other
side of the hole. Repeat this 4 times at the locations shown in the illustration.
Once everything is in place, go ahead and tighten all the bolts, but take care
not to over-tighten.
STEP 3
Check stability, then add
cushion [J]. Your moon chair is
now complete!

www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.