Forest 52931-25D User manual

042021WDOC Diamond Sense www.forestdh.com v1.4
FOREST DIAMOND SENSE REMOTE –52931-25D
Content:
1
2 5
3
3
Technical specification and battery
Display, unlock and mode setting
Switching between 15 and 2 channels
Set time and day 5
Set automatic timer Remove / turn
off timing position Programming
Shuttle motors
TECHNICAL SPECIFICATION:
●2x Alkaline battery type AAA, LR03
● battery life < 3 years
● frequency 433.92MHz
● transmit range indoor 98 feet
● working temperature 14°F- 122°F
● each channel can control up to 20 receivers
● transmit power max. 10mW
OPEN/UP
button
STOP
button P2 button (for programming
tubular motor)
CLOSE/DOWN
button
channel up/down INSERT BATTERY:
movement sensor remove the screw and
TIME button slide back cover upwards
MODE button to open remote
insert 2x AAA battery
mind the + and -
slide the back cover
downwards and fix
the screw
BATTERY EMPTY:
After changing the battery, programmed receivers will stay in memory of Diamond Sense remote.
Please follow the local regulations for disposal of the empty battery.
4

04/2021WDOC Diamond Sense www.forestdh.com v1.4
FOREST DIAMOND SENSE REMOTE –SETTINGS
DISPLAY: day of the week
mode time
channel no.
UNLOCK THE MODE AND TIME BUTTONS:
Keep both buttons MODE and
TIME pressed for about 4 seconds
until the display shows ‘LOC’.
Now you can set the mode and time.
MODE: MAN Manual mode: automatic timer mode is off
AUTO Auto mode: automatic timer mode is on
AUTO Random mode: automatic timer mode is on, OPEN and CLOSE time will vary
between + and –15 minutes
To change the mode, keep ‘MODE’ pressed until the desired mode appears in the display:

04/2021WDOC Diamond Sense www.forestdh.com v1.4
FOREST DIAMOND SENSE REMOTE –SET TIME
SWITCHING BETWEEN 15 AND 2 CHANNELS:
Default setting of the Diamond Sense is 15 channels. Channel 1 up to 15 can be used.
When desired, for example when you only have one or two motorized systems, you can change
the setting to 2 channels:
Keep both buttons, CH- and CH+ pressed for about 8 sec until
the display shows F-02.
Now the Diamond Sense is a 2-channel remote control.
To change back to a 15-channel remote control:
Keep both buttons, CH- and CH+ pressed for about 8 sec until the display shows F-15. Now the Diamond Sense
is a 15-channel remote control.
SET CURRENT TIME AND DAY (when necessary, first unlock the buttons: press and hold MODE and TIME):
or or
MODE must be ‘MAN’
press TIME button once, change hours by pressing press TIME button once, change minutes by pressing
hours start blinking OPEN or CLOSE button minutes start blinking OPEN or CLOSE button
or
press TIME button once, change day by pressing press STOP button
day starts blinking OPEN or CLOSE button to finish

04/2021WDOC Diamond Sense www.forestdh.com v1.4
FOREST DIAMOND SENSE REMOTE –SET TIMERS
SET AUTOMATIC OPEN AND CLOSE TIME (first unlock the buttons: press and hold MODE and TIME):
In total up to 9 OPEN and 9 CLOSE timing positions can be set. For example use 4 points:
Position 1: Ma-Tu-We-Th-Fr 7:30 OPEN
Position 2: Ma-Tu-We-Th-Fr 21:00 CLOSE
Position 3: Sa-Su 7:00 OPEN
Position 4: Sa-Su 20:00 CLOSE
SET TIMING POSITION 1 –OPEN:
or
MODE must be ‘AUTO’
or ‘AUTO’ OPEN
position 1
(press and hold
MODE button)
press MODE button once select the desired channel press TIME button once, change hours by pressing
hours start blinking OPEN or CLOSE button
or or
press TIME button once, change minutes by pressing press TIME button one, change day(s) by pressing press STOP button
minutes starts blinking OPEN or CLOSE button day starts blinking OPEN or CLOSE button to finish
SET TIMING POSITION 1 –CLOSE:
Repeat steps here above, only start by pressing MODE button twice position 1
CLOSE
NEXT TIMING POINTS:
can be set in the same way, press multiple times the MODE button until desired timing position OPEN or CLOSE is
reached. Maximum of 9 OPEN and 9 CLOSE positions can be set.

04/2021WDOC Diamond Sense www.forestdh.com v1.4
FOREST DIAMOND SENSE REMOTE –SET TIMERS
REMOVE / TURN OFF TIMING POSITION (example shows timing position 1 OPEN now on 07:00 CH2 →turn off)
MODE must be ‘AUTO’
or ‘AUTO’ OPEN
position 1
(houdt MODE knop
ingedrukt)
press MODE button once press a few times on press STOP button
CH- until --:-- appears to finish
When desired, repeat this action for any other timing position.
To turn off all timers temperately, set the remote control to mode ‘MAN’, see page 2.
You can recognize these Shuttle motors by the white antenna cable.
To program a Diamond Sense to a Shuttle HD/L/ECO Receiver, first select
the desired channel and proceed:
antenna
LED MOVES FROM LED STARTS BLINKING
1st →2nd→3rd LED
3x 1x for 5 sec. press 1x OPEN button
Same procedure, but press CLOSE instead of OPEN, will erase the programmed channel.
Do not mount the motor within 3 feet of other equipment and receivers.
This will interfere with the receiver.
FOREST SHUTTLE HD/L/ECO RECEIVER PROGRAMMING

www.forestdh.com
FOREST DIAMOND SENSE REMOTE –FCC STATEMENT
FOREST DIAMOND SENSE REMOTE
MODEL #'S: 52931-25D, 52931-59D
FCC PART 15 CERTIFICATION
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Forest Drapery Hardware
2500 Donn Drive
Cartersville GA 30120
678-721-0004