Forever Redwood STORAGE SHEDS User manual

ASSEMBLY INSTRUCTIONS FOR THE
STORAGE SHEDS
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
STORAGE SHEDS
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
Drawing
Description
Back Wall
Lateral Walls
Frontal Wall
Qty.
1
2
1
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
STORAGE SHEDS
www.ForeverRedwood.com
CONTENT OF BOXES
No.
4
5
6
7
8
Drawing
Description
Door (s)
Roof Panel
Roof Boards
Shelves
If ordered
Knee Braces
If ordered
Qty.
Quantity
will vary
1
Quantity
will vary
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 3
STORAGE SHEDS
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
Drawing
Description
5/16´´ X 5´´ Bolts
(To attach back wall and the frontal wall to
the lateral walls./ To attach the roof panel to
the lateral walls).
1 5/8´´ Deck Screws
(To attach the doors to the frontal wall).
2´´ Deck Screws
(To attach the roof boards to the roof panel).
3´´ Deck Screws
(To attach the shelves to the walls. / To attach
the knee braces to the walls and to the
shelves).
Note: Dimensions of your hardware will vary depending on size.

P| 4
STORAGE SHEDS
www.ForeverRedwood.com
No
1
2
3
4
5
6
7
8
DESCRIPTION
Back Wall
Lateral Walls
Frontal Wall
Door (s)
Roof Panel
Roof Boards
Shelves
Knee Braces
Note: Part numbers in the Drawing
are for reference only. These do not
match to the numbers marked on the
parts sent.
1
2
2
3
4
4
5
6
7
7
7
7
8

P| 5
STORAGE SHEDS
www.ForeverRedwood.com
Step 1: Use 5/16´´ x 5´´ bolts (A) to attach the lateral walls (2) to the back wall (1). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
Step 2: Attach the frontal wall (3) to the lateral walls with 5/16´´ x 5´´ bolts (A). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
2
1
5/16´´ X 5´´ Bolts
3
5/16´´ X 5´´ Bolts
2

P| 6
STORAGE SHEDS
www.ForeverRedwood.com
Step 3: Use 1 5/8´´ Deck Screws (B) to attach the doors (4) to the frontal wall. Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
Step 4: Attach the roof panel (5) to the lateral walls with 5/16´´ x 5´´ bolts (A). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
4
4
1 5/8´´ Deck Screws
5
5/16´´ X 5´´ Bolts

P| 7
STORAGE SHEDS
www.ForeverRedwood.com
Step 5: First, measure the roof panel. After that, cut the # 30 Felt Roof Deck Protection to those measures. Use staples to attach
the # 30 Felt Roof Deck Protection to the roof panel.
Step 6: Use 2´´ Deck Screws (C) to attach the roof boards (6) to the roof panel. Put the boards from the bottom to the top, the
overlapping between these boards it will be of ¾´´ approx. Each part has a series of numbers that indicate where to attach the part
with the corresponding number.
6
#30 Felt Roof
Deck Protection

P| 8
STORAGE SHEDS
www.ForeverRedwood.com
Step 7: Attach the shelves (7) to the walls with 3´´ Deck Screws (D). Each part has a series of numbers that indicate where to
attach the part with the corresponding number.
Step 8: Finally, use 3´´ Deck Screws (D) to attach the knee braces (8) to the shelves and to the walls. Each part has a series of
numbers that indicate where to attach the part with the corresponding number.
7
7
7
3´´ Deck Screws
3´´ Deck Screws
8

P| 9
STORAGE SHEDS
www.ForeverRedwood.com
This completes the Storage Sheds Assembly. Hope you enjoy your set for many decades. If you ever have a problem or a
question, don't hesitate to call us (866 332 2403) or email us. We are here to support you.