Forme Freestanding S User manual
Installation & Operating Instructions
contents checklist
A. Legs 2
B. Leg mounts 2
C. Screws 4
Recommended mounting procedures
•Read the instructions and familiarise yourself with the product
•Ensure all components are included in the box
•With the unit unplugged, slide the legs inside the leg mounts attached to the towel warmer body as
shown in the images - see Fig 2
•Align the screw holes and secure it using the screws provided
•This portable heated towel warmer must only be used with the legs fitted. Ensure that the unit is level
Operation
•Connect the plug to a properly grounded outlet
•The towel warmer will reach working temperature in about 5 - 10 minutes
•Switch the unit off when not in use
The Forme Freestanding Towel Warmer is manufactured
with a stainless steel finish for lasting beauty and
durability. It can easily dry and warm large towels and
bathrobes. Designed as a freestanding unit, it gives you
the flexibility to use it in virtually any room of your
home - bathroom, laundry room or even a dorm room.
Features:
Freestanding "S"
Heated Towel Warmer
•Freestanding for convenient placement and versatility
•Highly portable handy unit
•Warms & dries towels and bathrobes while reducing
ihumidity in your bathroom
•Easy to assemble
•120V (plug in)
Fig 2
Qty 2 Qty 4
Qty 2
A. B. C.
Dimensions
Model: 962 (h) x 500(w) mm ROUND
Height 962mm
Width 500mm
Depth mm
Bars
Electrical
Wattage 40W
Supply 230-240V ~ 50Hz
Ingress Protection Rating: IP34 – Splashproof Class I
appliance – requires earth connection
WARNING:
•If this towel warmer overheats to the touch (i.e over 40oC), disconnect immediately
•If this unit tips over, disconnect, make it upright ensuring that the towel warmer is level (stable) and only
then plug it in.
Specifications
Caution:
As with any electrical appliance, you should be aware of basic safety precautions when using this heated towel
warmer. Please read these instructions, and file them for future reference:
•This appliance is intended to warm and dry towels and bathrobes and not for other purposes. Because this
appliance gets hot, young children and infirm people should be closely supervised when nearby.
•This unit is not for outdoor use. Do not use this unit in wet locations like a shower, sauna, hot tub, pool
or anywhere it will be exposed to water.
•This towel warmer is designed to carry no more than two large towels. Exceeding this limit could result in
the discoloration of the towels due to heat build up.
•Children should not be allowed to play with this unit.
•Always unplug the towel warmer when not in use.
•When cleaning this towel warmer, use cleaners recommended for stainless steel surfaces only.
•Do not put the towels or anything else which has been in contact with hazardous liquids on this towel warmer.
•Use this appliance only on the voltage specified on the rating label.
•Electrical work to be performed by a registered electrician.
•Do NOT immerse the towel warmer in any liquid.
•Make sure the supply cord never touches heated surfaces.
•If the electrical cord or connection is damaged DO NOT attempt to repair; please contact the supplier.
Table of contents
Other Forme Heater manuals
