Fortinet FortiCam FE120 Installation instructions manual

1
FortiCam FE120 Mounting Guide

FORTINET DOCUMENT LIBRARY
https://docs.fortinet.com
FORTINET VIDEO GUIDE
https://video.fortinet.com
FORTINET BLOG
https://blog.fortinet.com
CUSTOMER SERVICE & SUPPORT
https://support.fortinet.com
FORTINET COOKBOOK
https://cookbook.fortinet.com
FORTINET TRAINING SERVICES
https://www.fortinet.com/training
FORTIGUARD CENTER
https://www.fortiguard.com
END USER LICENSE AGREEMENT
https://www.fortinet.com/doc/legal/EULA.pdf
FEEDBACK
Email: [e-mail]
May 17, 2019

3
Table of Contents
Warnings and Cautions................................................................................................................4
Available Mounting Accessories .................................................................................................5
Wall/Ceiling Mounting...................................................................................................................6

4
Warnings and Cautions
Handle the camera carefully
Do not abuse the camera. The camera can be damaged by improper handing or storage.
Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside.
Ask a qualified service person for servicing.
Do not operate the camera beyond the specified temperature, humidity or power source ratings
Use the camera under conditions where temperature is between -30°C ~ 60°C (-22°F ~ 140°F), and
relative humidity is below 90%.
Avoid exposure to direct sunlight in outdoor installation for better image quality and longer service
life
Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or
other extremely bright objects. Otherwise, the camera may be smeared or damaged.
Do not use strong or abrasive detergents when cleaning the camera body
Use a dry cloth to clean the camera when it is dirty. In case the dirt is hard to remove, use a mild
detergent and wipe the camera gently.

5
Mounting Accessories
The FCM-FE120-JBX junction box package comes with:
Junction box with three entry points
Two plugs and one cable grommet for entry points
Installation template
3x screws and plugs for mounting the box to the wall or ceiling
3x screws to mount the adapter plate to the box (adapter plate is supplied with the camera)

6
Wall/Ceiling Mounting
To mount the FE120 camera to the wall or ceiling
1. Place the mounting template on the desired surface for installation and mark the location for the
three mounting screws.
Note: If mounting on the wall, one tab on the circular template must be pointing downwards and the
other pointing rightwards for the camera to be upright.
2. Choose the desired entry port and arrange the plugs and grommet. Alternatively, the ports are
compatible with ½” EMT installation material. Fix the box into position using the provided mounting
screws.
3. Secure the adapter plate to the junction box with the three smaller screws provided.
Note: If mounting on a wall, position the arrow on the adapter plate so that it points downward.
4. Connect the cables to the camera and place the camera on the adapter plate, rotating it clockwise till
the anchor points align.
5. Lock the camera using the lock screw, located on the top of the camera under the cover.

7
6. Install the decorative cover by turning it clockwise until the anchor points are alighted.
Tip: Use the back entry of the junction box to easily hang the camera from the ceiling, using standard ½”
EMT tubing and material.

Copyright© 2019Fortinet, Inc. Allrights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, andcertainother marks areregisteredtrademarks of Fortinet, Inc., in
t heU.S. andotherjurisdictions, and otherFortinet names hereinmay alsoberegistered and/or commonlaw trademarks of Fortinet. Allotherproduct orcompany names may
be trademarks of their respectiveowners. Performance andothermetrics containedhereinwereattainedininternallabtests under idealconditions, andactualperformance
and otherresults may vary. Network variables, different network environments andotherconditions may affect performanceresults. Nothinghereinrepresents any binding
commitment by Fortinet, and Fortinet disclaims allwarranties, whether express orimplied, except to theextent Fortinet enters abindingwrittencontract, signed by Fortinet’s
General Counsel, witha purchaserthat expressly warrants that theidentifiedproduct will perform according tocertainexpressly-identifiedperformancemetrics and, insuch
event, only the specific performance metrics expressly identifiedinsuch bindingwrittencontract shallbebindingonFortinet. Forabsoluteclarity, any such warranty willbe
limitedtoperformance inthesameideal conditions as in Fortinet’s internallabtests. In no event does Fortinet makeany commitment relatedtofuturedeliverables, features,
or development, and circumstances may change suchthat any forward-lookingstatements hereinarenot accurate. Fortinet disclaims infull any covenants, representations,
and guarantees pursuant hereto, whetherexpress orimplied. Fortinet reserves theright tochange, modify, transfer, orotherwiserevisethis publicationwithout notice, and
themost current versionof thepublicationshallbeapplicable.