Fortinet FortiCam MD40 Installation instructions manual

1
FortiCam MD40/50 Mounting Guide

FORTINET DOCUMENT LIBRARY
https://docs.fortinet.com
FORTINET VIDEO GUIDE
https://video.fortinet.com
FORTINET BLOG
https://blog.fortinet.com
CUSTOMER SERVICE & SUPPORT
https://support.fortinet.com
FORTINET COOKBOOK
https://cookbook.fortinet.com
FORTINET TRAINING SERVICES
https://www.fortinet.com/training
FORTIGUARD CENTER
https://www.fortiguard.com
END USER LICENSE AGREEMENT
https://www.fortinet.com/doc/legal/EULA.pdf
FEEDBACK
Email: [e-mail]
May 21, 2019

3
Table of Contents
Warnings and Cautions................................................................................................................4
Available Mounting Accessories .................................................................................................5
Cable Adapter Wall/Ceiling Mounting..........................................................................................6
Wall Mounting Kit..........................................................................................................................7
Junction Box Wall/Ceiling Mounting ...........................................................................................8

4
Warnings and Cautions
Handle the camera carefully
Do not abuse the camera. The camera can be damaged by improper handing or storage.
Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside.
Ask a qualified service person for servicing.
Do not operate the camera beyond the specified temperature, humidity or power source ratings
Use the camera under conditions where temperature is between -30°C ~ 60°C (-22°F ~ 140°F), and
relative humidity is below 90%.
Avoid exposure to direct sunlight in outdoor installation for better image quality and longer service
life
Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or
other extremely bright objects. Otherwise, the camera may be smeared or damaged.
Do not use strong or abrasive detergents when cleaning the camera body
Use a dry cloth to clean the camera when it is dirty. In case the dirt is hard to remove, use a mild
detergent and wipe the camera gently.

5
Available Mounting Accessories
FortiCam MD40/50 camera comes with one accessory for Wall/Ceiling surface mounting.
Cable Adapter Mounting Kit
You can also order any of the following mounting accessories for your installation requirements:
Wall Mounting Kit (SKU: FCM-MD40-WMT)
Junction Box Wall/Ceiling Mounting Kit (SKU: FCM-MD40-JBX)
For simple mounting instructions without using the additional accessories, see the FortiCam MD40/50
QuickStart Guide.

6
Cable Adapter Wall/Ceiling Mounting
Use the Cable Adapter Mounting Kit to mount the camera on a hard surface where the cable is routed
outside the wall or ceiling.
1. Mount the bracket on the wall or ceiling using two screws (1).
2. Open the camera cover, thread the cable through the gap on the bracket, and attach the camera to
the bracket with two screws.
3. Adjust the lens direction of the camera.
4. Close the cover of the camera.

7
Wall Mounting Kit
Use the Wall Mounting Kit to mount the camera on the wall in a hanging position.
1. Loosen screw (4) to remove wall plate.
2. Attach wall plate to wall with provided hardware.
3. Thread the cable (1) thought the bracket and attach to cable from wall. Store connector inside
bracket.
4. Mount the bracket on the wall by hooking into the wall plate and tightening screw (4).
5. Open the camera cover and attach the camera to the bracket with two screws (2).
6. Adjust the camera’s horizontal angle and then tighten the screw (3) on the bracket.
7. Adjust the lens direction of the camera and close the cover.

8
Junction Box Wall/Ceiling Mounting
Use the Junction Box Mounting Kit to mount the camera on a hard surface where the cable is routed outside
the wall or ceiling. It also provides room for storing the Ethernet connector. Its side port is compatible with ½”
EMT cable glands.
1. Mount the bracket on the wall or ceiling using provided hardware (1).
2. Optionally remove silicone plug from side port and attach ½” cable gland or EMT tubing.
3. Connect the Ethernet cable.
4. Open the camera cover and attach the camera to the bracket with two screws.
5. Adjust the lens direction of the camera.
6. Close the cover of the camera.

Copyright© 2019 Fortinet, Inc. Allrights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, andcertainother marks are registered trademarks of Fortinet, Inc., in
t heU.S. andotherjurisdictions, and otherFortinet names hereinmay alsoberegistered and/or commonlaw trademarks of Fortinet. All otherproduct orcompany names may
be trademarks of their respectiveowners. Performance andothermetrics containedhereinwereattainedininternallabtests under idealconditions, andactualperformance
and otherresults may vary. Network variables, different network environments andotherconditions may affect performanceresults. Nothing hereinrepresents any binding
commitment by Fortinet, and Fortinet disclaims allwarranties, whether express orimplied, except to theextent Fortinet enters a bindingwritten contract, signed by Fortinet’s
General Counsel, witha purchaserthat expressly warrants that theidentifiedproduct will perform accordingtocertainexpressly-identifiedperformancemetrics and, insuch
event, only the specific performance metrics expressly identifiedinsuch bindingwrittencontract shallbebindingonFortinet. Forabsolute clarity, any such warranty will be
limitedtoperformance inthesameideal conditions as in Fortinet’s internallabtests. In no event does Fortinet make any commitment relatedtofuturedeliverables, features,
or development, and circumstances may change suchthat any forward-lookingstatements herein arenot accurate. Fortinet disclaims in full any covenants, representations,
and guarantees pursuant hereto, whetherexpress orimplied. Fortinet reserves theright tochange, modify, transfer, orotherwiserevisethis publicationwithout notice, and
themost current versionof thepublicationshallbeapplicable.