Fortinet FortiCam FE120B Installation instructions manual

1
FortiCam FE120B Mounting Guide
FortiCam™ FD50 Mounting Guide

FortiCam FE120B Mounting Guide January 18, 2023
Copyright © 2023 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and
certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be
registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of
their respective owners. Performance and other metrics contained herein were attained in internal lab tests under
ideal conditions, and actual performance and other results may vary. Network variables, different network
environments and other conditions may affect performance results. Nothing herein represents any binding
commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent
Fortinet enters a binding written contract, signed by Fortinet's General Counsel, with a purchaser that expressly
warrants that the identified product will perform according to certain expressly-identified performance metrics and,
in such event, only the specific performance metrics expressly identified in such binding written contract shall be
binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal
conditions as in Fortinet's internal lab tests. Fortinet disclaims in full any covenants, representations, and
guarantees pursuant hereto, whether express or implied. Fortinet
reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most
current version of the publication shall be applicable.
Technical Documentation
Knowledge Base
Customer Service & Support
Training Services
FortiGuard Document
Feedback
docs.fortinet.com
kb.fortinet.com
support.fortinet.com
training.fortinet.com
fortiguard.com
[e-mail]

Table of Contents
Warnings and Cautions.......................................................................................... 4
Mounting the Pendant Cap..................................................................................5-9

4
Warnings and Cautions

Handle the camera carefully
Do not abuse the camera. The camera can be damaged by improper handing or storage.

Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no user serviceable
parts inside. Ask a qualified service person for servicing.

Do not operate the camera beyond the specified temperature, humidity or power
source ratings
Use the camera under conditions where temperature is between -30°C - 60°C (-22°F -
144°F), and relative humidity is below 90%.

Do not use strong or abrasive detergents when cleaning the camera body
Use a dry cloth to clean the camera when it is dirty. In case the dirt is hard to remove, use a
mild detergent and wipe the camera gently.

Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it
at the sun or other extremely bright objects. Otherwise, the camera may be smeared or
damaged.

5
Mounting the Pendant Cap
Pendant Cap
FortiCam-FE120B
Camera SKU: FCM-FE120B
Pendant Cap SKU: FCM-FE120B-PCP-4
Included: 4x M4 bolts, 4x screws, allen key, 1x waterproof grommet and Ethernet connector push tip,
1x replacement dry pack
The following instructions detail how to mount to the pendant cap:
Note: More information on the mounting system based on the pendant cap can be found in the
Pendant Cap Mounting Guide.
1. Loosen the four screws on the camera to remove the camera’s cover.

6
2. Press the tabs on the sides of the camera to separate the camera from the mounting plate.
3. Attach the mounting plate to the pendant cap with the supplied machine bolts (M4 x 10mm)
using the holes (A).
Note the position of the mounting plate:
Correct:
Not working:
4. Thread the network cable through the pendant cap.

7
5. Open the small hole in the grommet by pulling the center tip.
6. Remove the protective cap from the Ethernet cable and use the Ethernet connector push tip
to push the Ethernet cable through the grommet, making sure the grommet membrane is
folded outwards.
7. Fit the grommet tightly into the camera body and connect the network cable.

8
8. Replace the dry pack found inside the camera with the fresh one from the protective pouch in
the box. Ensure no moisture gets trapped inside of the camera.
9. Snap the camera onto the mounting plate.
10. Attach the camera’s cover and then fasten with the four provided screws.

9
11. Ensure the inside of the dome cover is free of dust and particles by gently wiping inside the
dome cover with a clean lint free cloth or blowing away the dust.
12. Remove the protective covering from the lens after installation.

Copyright© 2023Fortinet, Inc. Allrights reserved. Fortinet®, FortiGate®, FortiCare® andFortiGuard®, andcertainother marks are registeredtrademarks of
Fortinet, Inc., in t heU.S. andother jurisdictions, and other Fortinet names hereinmay alsoberegisteredand/or commonlaw trademarks of Fortinet. Allother product
or company names may be trademarks of their respectiveowners. Performanceandother metrics containedhereinwereattainedininternal labtests under ideal
conditions, and actual performance and other results may vary. Network variables, different network environments andother conditions may affect performance
results. Nothinghereinrepresents any binding commitment by Fortinet, and Fortinet disclaims allwarranties, whether express or implied, except to theextent
Fortinet enters abindingwrittencontract, signedby Fortinet’s GeneralCounsel, with a purchaserthat expressly warrants that theidentifiedproduct will perform
accordingtocertainexpressly-identifiedperformancemetrics and, in such event, only thespecific performance metrics expressly identifiedinsuchbindingwritten
contract shall bebindingonFortinet. Forabsoluteclarity, any such warranty will be limitedtoperformance inthesameideal conditions as inFortinet’s internal lab
tests. In noevent does Fortinet makeany commitment relatedto futuredeliverables, features, or development, and circumstances may changesuchthat any
forward-lookingstatements hereinarenot accurate. Fortinet disclaims infullany covenants, representations, and guarantees pursuant hereto, whether express or
implied. Fortinet reserves theright tochange, modify, transfer, orotherwiserevisethis publicationwithout notice, andthemost current versionof thepublication
shall beapplicable.