Forwell M1 series User manual

User Manual
M1 Series Wireless Modem
2/24/2010
Forwell Wireless Co., Ltd.
Shandy Feng

User Manual
[Type text] Page 2
M1 Series Wireless Modem
User Manual
Power by Forwell Wireless

User Manual
[Type text] Page 3
Important Notice
Due to the nature of wireless communications, transmission and reception of data can never
be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although
significant delays or losses of data are rare when wireless devices such as the Forwell Wireless
device are used in a normal manner with a well‐constructed network, the Forwell Wireless
device should not be used in situations where failure to transmit or receive data could result in
damage of any kind to the user or any other party, including but not limited to personal injury,
death, or loss of property. Forwell Wireless accepts no responsibility for damages of any kind
resulting from delays or errors in data transmitted or received using the Forwell Wireless device,
or for failure of the Forwell Wireless device to transmit or receive such data.
Safety and Hazards
Do not operate the Forwell Wireless device in areas where blasting is in progress, where
explosive atmospheres may be present, near medical equipment, near life support equipment, or
any equipment which may be susceptible to any form of radio interference. In such areas, the
Forwell Wireless device MUST BE POWERED OFF. The Forwell Wireless device can transmit signals
that could interfere with this equipment. Do not operate the Forwell Wireless device in any
aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Forwell Wireless device
MUST BE POWERED OFF. When operating, the Forwell Wireless device can transmit signals that
could interfere with various onboard systems.
Note: Some airlines may permit the use of cellular phones while the
aircraft is on the ground and the door is open. Forwell Wireless device
may be used at this time.
The driver or operator of any vehicle should not operate the Forwell Wireless device while in
control of a vehicle. Doing so will detract from the driver or operator’s control and operation of
that vehicle. In some states and provinces, operating such communications devices while in
control of a vehicle is an offence.
Limitations of Liability
This manual is provided “as is”. Forwell Wireless makes no warranties of any kind, either
expressed or implied, including any implied warranties of merchantability, fitness for a particular
purpose, or noninfringement. The recipient of the manual shall endorse all risks arising from its
use.
The information in this manual is subject to change without notice and does not represent a
commitment on the part of Forwell Wireless. FORWELL WIRELESS AND ITS AFFILIATES

User Manual
[Type text] Page 4
SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL,
INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT
LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT
OF THE USE OR INABILITY TO USE ANY FORWELL WIRELESS PRODUCT, EVEN IF FORWELL
WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY.
Notwithstanding the foregoing, in no event shall Forwell Wireless and/or its affiliates
aggregate liability arising under or in connection with the Forwell Wireless product, regardless of
the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid
by the purchaser for the Forwell Wireless product.
Copyright
© 2009 Forwell Wireless Co., Ltd. All rights reserved.
Trademarks
“Forwell Wireless®” and are filed or registered trademarks of
Forwell Wireless in P. R . C hina and/or in other countries.
Windows® is a registered trademark of Microsoft Corporation.
QUALCOMM® is a registered trademark of QUALCOMM Incorporated. Used under license.
Other trademarks are the property of the respective owners.
Contact Information
Sales Desk Phone [phone]
Hours 8:30 AM to 6:30 PM GMT+8
E-mail [e-mail]
FAX [phone]
Post 2-4A, Chaguang Industrial Park,
Nanshan District, Shenzhen, Guangdong Province,
P.R.China
Web http://www.forwellwireless.com

User Manual
[Type text] Page 5
Contents
Wireless Router R8 Series User Manual............................................................................................1
Important Notice...............................................................................................................................3
Safety and Hazards ............................................................................................................................3
Limitations of Liability .......................................................................................................................3
Copyright...........................................................................................................................................4
Trademarks........................................................................................................................................4
Contact Information..........................................................................................................................4
Document History .............................................................................................................................7
Overview .........................................................................................................错误！未定义书签。
Introduction ......................................................................................................................................7
Important Remarks ...................................................................................................................7
References.................................................................................................................................7
Abbreviations ............................................................................................................................7
Produclist ..................................................................................................................................8
Appearance .....................................................................................................错误！未定义书签。
Front Panel ..............................................................................................错误！未定义书签。
Rear Interface..........................................................................................错误！未定义书签。
Specification....................................................................................................错误！未定义书签。
Connection......................................................................................................错误！未定义书签。
Login the router ..............................................................................................错误！未定义书签。
Configuration Describe....................................................................................错误！未定义书签。
3G Router................................................................................................错误！未定义书签。
Operation Mode......................................................................................错误！未定义书签。
Internet settings......................................................................................错误！未定义书签。
Wide Area Network (WAN) Settings................................................错误！未定义书签。
Local Area Network (LAN) Settings .................................................错误！未定义书签。
DHCP Client List...............................................................................错误！未定义书签。
Static Routing Settings.....................................................................错误！未定义书签。
Wireless settings .....................................................................................错误！未定义书签。
Basic Wireless Settings....................................................................错误！未定义书签。
Wireless Security/Encryption Settings ............................................错误！未定义书签。
Wireless Distribution System ..........................................................错误！未定义书签。
Wi-Fi Protected Setup .....................................................................错误！未定义书签。
Station List.......................................................................................错误！未定义书签。
Firewall....................................................................................................错误！未定义书签。
MAC/IP/Port Filtering Settings ........................................................错误！未定义书签。
Virtual Server Settings.....................................................................错误！未定义书签。
DMZ Settings...................................................................................错误！未定义书签。
System Security Settings .................................................................错误！未定义书签。
Filter Settings...................................................................................错误！未定义书签。
Webs URL Filter Settings .................................................................错误！未定义书签。
Administration.........................................................................................错误！未定义书签。

User Manual
[Type text] Page 6
System Management ......................................................................错误！未定义书签。
Upgrade Firmware...........................................................................错误！未定义书签。
Settings Management .....................................................................错误！未定义书签。
Access Point Status..........................................................................错误！未定义书签。
Statistic............................................................................................错误！未定义书签。
System Log.......................................................................................错误！未定义书签。
Product Parts List ............................................................................................错误！未定义书签。

User Manual
[Type text] Page 7
Introduction
This user guide describes the M1 series wireless modem. The aim of the manual is to ease
the test, install and disposition.
Note: Though all features are documented in this manual, new features
may still be in beta stage at publication and therefore may not yet be
validated. Please refer to the Customer Release Note for complete and
detailed information regarding beta and validated features at time of
release.
Document History
Version Comments Date Writer
1.00 Standard 2008-7-7 Yuhui
1.10 Fix some bugs 2009-5-3 Gavin
2.00 Modify the document structure
Add product type
Add function description
2010-2-24 Shandy
2.01 Add the M12G111 baud rate setting describe 2010-4-23 Shandy
References
M12S211 MODEM DATAS HE E T
M12Z111 MODEM DATASHEET
M12AZ1411 MODEM DATA SH EE T
M12AC111 MODEM DATAS HE E T
M12H111 MODEM DATAS HE E T
M12O111 MODEM DATA SH EE T
M12O211 MODEM DATA SH EE T
M12N111 MODEM DATAS HE E T
M12N211 MODEM DATAS HE E T
M12G111 MODEM DATASHEET
M13Z311 MODEM DATASHEET
M13Z811 MODEM DATASHEET
M13H211 MODEM DATAS HE E T
M13H311 MODEM DATAS HE E T

User Manual
[Type text] Page 8
Abbreviations
APN Access Point Name
DAC Digital Analog Converter
GGSN Gateway GPRS Support Node
GPRS General Packet Radio Service
IP Internet Protocol
KB Kilobyte
MCC Mobile Country Code
MNC Mobile Network Codes
MS Mobile Station
PDU Protocol Data Unit
PLMN Public Land Mobile Network
RSSI Received Signal Strength Indication
SMA Small Adapter
SMS Short Message Services
Produclist
产品型号
描述
M11 M11S111 GSM 900/1800 RS-232(DB9)
M12 M12S211 GPRS 900/1800 RS-232(DB9)
M12Z111 GPRS 850/900/1800/1900 RS-232(DB9)
M12AZ1411 GPRS 850/900/1800/1900 RS-232(DB9)
M12AC111 GPRS 850/900/1800/1900 RS-232(DB9)
M12O111 GPRS 900/1800/1900 RS-232(DB9)
M12N111 GPRS 900/1800 RS-232(DB9)
M12N211 GPRS 900/1800 RS-232(DB9)
M12G111 GPRS 900/1800 RS-232(DB9)
M13 M12H111 GPRS 850/900/1800/1900 RS-232(DB9)
M13Z311 CDMA 800 RS-232(DB9)
M13Z811 CDMA 450 RS-232(DB9)
M13H211 CDMA 800 RS-232(DB9)
M13H311 CDMA 450 RS-232(DB9)

User Manual
[Type text] Page 9
Introduction
With the development of wireless communication technologies, wireless products are being
adopted in numerous industrial and civilian fields. Shenzhen Forwell Wireless Co., Ltd. a leader of
wireless communication equipment manufacturer releases the M1 Series Wireless Modems,
which support various frequency bands of GSM/GPRS/CDMA 1X, and provide industrial terminal
solutions for 2.5G/2.75G communication.
M1 series wireless modem adopts industrial level modules, specially designed for the
complicated industrial environment which compatible with EMC, and will be your best choose of
wireless communication.
Features


AT command interface

Support GSM （ GPRS ） /CDMA2000 1X

Support Voice, SMS and CSD

Dial up, data communication(except M11)

Support APN or VPDN(except M11)

LED: power, ring, data

Interface: RS232/RS485/TTL

Watchdog(software and hardware)

Always online detect
Specification
Steel shell for anti-electromagnetic interference
产品型号
射频特性
M11S111 GSM phase 2/2+ GSM EGSM 900 Mhz Class 4 (2W)
DCS 1800 Mhz Class 1 (1W)
M12S211 GSM phase 2/2+ GPRS EGSM 900 Mhz Class 4 (2 W)
DCS 1800 Mhz Class 1 (1W)
M12Z111 GSM phase 2/2+ GPRS GSM 850 Mhz Class 4 (2W)
EGSM 900 Mhz Class 4 (2W)
DCS 1800 Mhz Class 1 (1W)
PCS 1900Mhz Class 1 (1W)
M12AZ1411 GSM phase 2/2+ GPRS GSM 850 Mhz Class 4 (2W)
EGSM 900 Mhz Class 4 (2W)
DCS 1800 Mhz Class 1 (1W)

User Manual
[Type text] Page 10
PCS 1900Mhz Class 1 (1W)
M12AC111 GSM phase 2/2+ GPRS GSM 850 Mhz Class 4 (2W)
EGSM 900 Mhz Class 4 (2W)
DCS 1800 Mhz Class 1 (1W)
PCS 1900Mhz Class 1 (1W)
M12H111 GSM phase 2/2+ GPRS GSM 850 Mhz Class 4 (2W)
EGSM 900 Mhz Class 4 (2W)
DCS 1800 Mhz Class 1 (1W)
PCS 1900 Mhz Class 1 (1W)
M12O111 GSM phase 2/2+ GPRS EGSM 900 Mhz Class 4 (2W)
DCS 1800 Mhz Class 1 (1W)
PCS 1900 Mhz Class 1 (1W)
M12N111 GSM phase 2/2+ GPRS EGSM 900 Mhz Class 4 (2W)
DCS 1800 Mhz Class 1 (1W)
M12N211 GSM phase 2/2+ GPRS EGSM 900 Mhz Class 4 (2W)
DCS 1800 Mhz Class 1 (1W)
M12G111 GSM phase 2/2+ GPRS EGSM 900 Mhz Class 4 (2W)
DCS 1800 Mhz Class 1 (1W)
M13Z311 TIA/EIA-95B
CDMA2000 1X
824.64MHZ~848.37MHZ
869.94MHZ~893.37MHZ
M13Z811 TIA/EIA-95B
CDMA2000 1X
450 Mhz
M13H211 TIA/EIA-95B
CDMA2000 1X
824.64MHZ~848.37MHZ
869.94MHZ~893.37MHZ
M13H311 CDMA 450 Mhz

User Manual
[Type text] Page 11
Application
Remote Data Monitor and Control
Water, gas and oil flow metering
AMR (automatic meter reading)
Power station monitoring and control
Remote POS (point of sale) terminals
Traffic signals monitor and control
Fleet management
Power distribution network supervision
Central heating system supervision
Weather station data transmission
Hydrologic data acquisition
Vending machine
Traffic info guidance
Parking meter
Tel ecom equipment supervision (Mobile base station, microwave or optical relay station)
Oil field data acquisition
Warehouse supervision

User Manual
[Type text] Page 12
Device Connection
LED Description
Power ON: boot
FLASH: running
Ring ON: boot
FLASH: incoming call
Data ON: boot
FLASH: data transfer
NOTE ：The indicator lamp of M12AZ1411 AND M12AC111 is different form above，
as shown in the diagram below：
LED
描述
Serial OFF：No serial data communication
FLASH：serial data communication
Ring OFF：NO call
ON：Telephone ringing
Data ON：Device Boot
FLASH：data transfer
Interface Description
Antenna SMA
SIM 3.3V
Power Φ2.0
Serial Port DB9
Insert SIM/UIM card.
Note: Don’t insert or remove the SIM/UIM
card in the power on statu.

User Manual
[Type text] Page 13
Assemble the antenna, connect to PC via RS-232, power on.
Open the Hyperterminal
Windows start menuall programsAccessoriesCommunicationsHyper Terminal
Enter the name of the connection.

User Manual
[Type text] Page 14
Choose the communication port.
Setting the port properties.
Note: the ForwellWireless Modem port properties factory default is
115200/8/n/1/0, as above picture.

User Manual
[Type text] Page 15
If the port parameters is different to your setting, click disconnect, then click properties.
Click the Configure.
Port parameters
Propertie
DisconnectCall

User Manual
[Type text] Page 16
Comfirm the parameters again.
After setting, the Hyper Terminal window as above.
Click call buttom, the Hyper Terminal is ready for operate.
Port parameters

User Manual
[Type text] Page 17
AT Command
AT Command Rule
AT<cr> // return Ok
AT+XXX=YYY<cr> // setting parameter
AT+XXX
？ <cr> // query parameter
AT&F<cr > // restore Modem parameters to factory default
AT&W<cr > // save parameters
Note: the AT command not case-sensitive, prefix by at and terminate by
<cr>
Commonest Command
AT+CSQ<cr> // signal query
AT+I PR? <cr> // query device baud rate
AT+IPR=115200<cr> // baud rate setting, support
115200/57600/38400/19200/9600/4800/2400/1200
AT+BDR=115200<cr> // baud rate setting, M12G111 only
ATD13612345678;<cr> // voice call
ATD13612345678<cr> // data call
ATA<cr > // incoming call answer
+++ // switch data mode to command mode
ATO<cr > // switch command mode back to data mode
ATH<c r> // hang up

User Manual
[Type text] Page 18
SMS
M11/M12 SMS
M11/M12 include: M11S111，M12S211，M12Z111，M12O111，M12N111，M12N211，M12G111，
M12H111
M11/M12 Query SMS Center
AT+CSCA<cr> // query the SMS center number which auto get from network
+CSCA : “[phone]” , 145
OK
M11/M12 ASCII Message
AT+CMGF=1<cr> // setting ASCII mode
OK
AT+CMGS=”13691978232”<cr> // destination number
>Hello
， Forwell ！！！ → // message by ASCII sets, terminate character ” → ” means Ctrl+Z(0X1A)
+CMGS
： nnn // message stamp
OK
Note: if no message stamp return, please resend the message again
M11/M12 Message Relate Command
AT+CMGF=1<cr> // setting ASCII mode
AT+C M GL=”ALL”<cr> // query the SMS list
AT+CMGR=n<cr> // read the SMS, location value is n
AT+CMGD=n<cr> // delete the SMS, location value is n
M11/M12 Receive SMS
AT+CPMS=MT,MT,MT<cr>// Preferred SMS message storage
AT+CSMS=1<cr> // Select Message Service
+CSMS: 1, 1, 1
OK
AT+CNMI=1,1<cr> // New SMS message indications setting
OK

User Manual
[Type text] Page 19
+CMTI : “ MT ” ,1 // New SMS message indications
AT+CMGR=1<cr> // read SMS
+CMGR: 0, 23
544651984165416511515…
AT+CSMS=1<cr> // Select Message Service
+CSMS: 1, 1, 1
OK
AT+CNMI=2,2<cr> // New SMS message indications setting
OK
+CMT :
“ +86138******* ” , , “ 04/06/26 ” // auto display the new SMS
Hello
AT+CNMA<cr> // new SMS acknowledge
OK
Note: in the auto display mode, there is the AT+CNMA must sent after
received the new SMS
M12Z1411/M12AZ1411/M12Z1511/M12AZ1511 SMS
M12Z1411/M12AZ1411/M12Z1511/M12AZ1511 Query SMS
Center
AT+CSCA<cr> // query the SMS center number which auto get from network
+CSCA : “[phone]” , 145
OK
M12Z1411/M12AZ1411/M12Z1511/M12AZ1511 ASCII
Message
AT+CMGF=1<cr> // setting ASCII mode
OK
AT+CMGS=”13691978232”<OXOD> // destination number
>Hello
， Forwell ！！！ → // message by ASCII sets, terminate character ” → ” means Ctrl+Z(0X1A)
+CMGS
： nnn // message stamp
OK
Note: if no message stamp return, please resend the message again

User Manual
[Type text] Page 20
M12Z1411/M12AZ1411/M12Z1511/M12AZ1511 Message
Relate Command
AT+CMGF=1<cr> // setting ASCII mode
AT+C M GL = ”ALL”<cr> // query the SMS list
AT+CMGR=n<cr> // read the SMS, location value is n
AT+CMGD=n<cr> // delete the SMS, location value is n
M12Z1411/M12AZ1411/M12Z1511/M12AZ1511 Receive SMS
AT+CPMS=MT,MT,MT<cr>// Preferred SMS message storage
AT+CSMS=1<cr> // Select Message Service
+CSMS: 1, 1, 1
OK
AT+CNMI=1,1<cr> // New SMS message indications setting
OK
+CMTI :
“ MT ” ,1 // New SMS message indications
AT+CMGR=1<cr> // read SMS
+CMGR: 0, 23
544651984165416511515…
AT+CSMS=1<cr> // Select Message Service
+CSMS: 1, 1, 1
OK
AT+CNMI=2,2<cr> // New SMS message indications setting
OK
+CMT :
“ +86138******* ” , , “ 04/06/26 ” // auto display the new SMS
Hello
AT+CNMA<cr> // new SMS acknowledge
OK
Note: in the auto display mode, there is the AT+CNMA must sent after
received the new SMS