8
Specic instrucions for big pullers
• Use a crane and slings for unloading the puller.
• Thanks to the slings, the puller can work horizontally.
• For changing the position, from horizontally to vertically, incline the puller slowly and
carefully.
• Please keep attention once lifting the puller vertically as the legs will tend to close.
Keeping the screws of the legs tighten the jaws closing movement will be slowly.
• Work slowly with the puller in order to prevent any unexpected displacement.
• Take always into account the important weight of the complete puller.
• It is strongly suggested to work always with the legs placed in the lowest possible position.
It will reduce legs deformation.
• It is only necessary to release the screw of the leg in case it is required to change the
position of the jaw. Without taking it out, moving it til place the screw in other leg hole. It is
highly recommended to do it leg by leg.
• Due to safety reason, do not exceed the manometer red part.
• Because of the size/weight, be sure that the puller si perfectly centered and that three
legs are perfectly placed.
