8665880395
BORATOOL.COM ©2018 BORA TOOL
5Push down on latch handle to collapse tray
6Place board on tray, make sure it is
centered
9Unfold legs, ensure pin snaps into place
10 Flip up board to horizontal,
ensure latch snaps into place
4Tighten knobs
1Install Wheels
7Collapse legs by pushing in the spring pin 8Place the panel carrier next to the table saw
11 Make your cut
3Flip up tray to
horizontal, adjust
horizontal height
until it is level with
the height of your
table saw
PM-1800
USER MANUAL
PANEL CARRIER
2Flip out legs, ensure pin
snaps into place
MOVE YOUR
MATERIAL
WITH EASE
