FOTILE EMS9016 User manual

RANGE HOOD
User
Manual
|
EMS9016/EMS9017/EMS9018
Please read carefully about the user manual before using the product.
And keep it well after reading, for future reference.

FOTILE
Honorable guest, thank you for your choice of FOTILE products.
Please read through the manual to be familiar with the correct opera-
tion norms and enjoy the cooking.
FOTILE promise is making our home better. It is our duty to let you
satisfy with FOTILE products. Please read the user manual carefully
before using it, and operate it complying with the manual requests.
The manual description is important to keep the product a good work-
Ing condition. And you will lose the free warranty right if the product is
failed to use due to your improper use, thus any direct or indirect free
warranty certificate will be rejected by FOTILE authorized service
center. Meanwhile, we suggest you contact FOTILE service center
when the product need to be repaired no matter within or exceed the
warranty period. FOTILE star-level service goal is to make customers
fully satisfied by our tireless efforts.
CONTENTS
CONTENTS
Warning
and
Safety
Instructions
1
Usage
———————————————————————————————————————————————————————————————————————————————
2
Operation
Instructon
---———-————-eeeee
4
Cleaning
and
Maintenance
————————
9
Normal
Malfunction
and
Trouble
Shooting
10
Installaton
o
11
Packing
List
—————r—or————————————
11
Installation
Methods
-~
11
Installation
Suggestions
-
12
Installation
Steps
———————————
15
Debugging
—————————o
e
16
Main
Technical
Specifications
———————————————
17
Component Name Diagram v 17

FOTILE
Honorable guest, thank you for your choice of FOTILE products.
Please read through the manual to be familiar with the correct opera-
tion norms and enjoy the cooking.
FOTILE promise is making our home better. It is our duty to let you
satisfy with FOTILE products. Please read the user manual carefully
before using it, and operate it complying with the manual requests.
The manual description is important to keep the product a good work-
Ing condition. And you will lose the free warranty right if the product is
failed to use due to your improper use, thus any direct or indirect free
warranty certificate will be rejected by FOTILE authorized service
center. Meanwhile, we suggest you contact FOTILE service center
when the product need to be repaired no matter within or exceed the
warranty period. FOTILE star-level service goal is to make customers
fully satisfied by our tireless efforts.
CONTENTS
CONTENTS
Warning
and
Safety
Instructions
1
Usage
———————————————————————————————————————————————————————————————————————————————
2
Operation
Instructon
---———-————-eeeee
4
Cleaning
and
Maintenance
————————
9
Normal
Malfunction
and
Trouble
Shooting
10
Installaton
o
11
Packing
List
—————r—or————————————
11
Installation
Methods
-~
11
Installation
Suggestions
-
12
Installation
Steps
———————————
15
Debugging
—————————o
e
16
Main
Technical
Specifications
———————————————
17
Component Name Diagram v 17

FOTILE
READ AND SAVE THESE INSTRUCTION
Warning and Safety Instructions
<> To avoid any accidental risks or damages to the range hood, please read this user's manual
carefully before initial installation and use.
<> Make sure that the actual voltage and frequency are accorded with the ones clarified in this user's
manual to avoid any possible damages to the range hood.
<> The range hood is for residential use only.
<> Caution: For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
<> Unplug or disconnect the appliance from the power supply before servicing.
B Environmental Protection
1. Packing materials like absorption film, polystyrene and plastics may cause suffocation, so please
keep them away from the reach of infants and children.
2. Dispose the packing materials properly.
3. The replaced appliance should be sent to the local reclamation depot or recycling center. Keep
children away from those places to ensure their safety. The electric wire of the appliance should
be cut off to avoid misuse.
Il Mechanical Safety
1. Please use standard accessories provided by our company to ensure safe installation. (Make
sure to use the expansion pipe and expansion bolt provided by our company, in case the range
hood falls down accidentally); The hole drilled in the wall should precisely match the size of the
expansion pipe, otherwise, the range hood may loose and fall down.
2. The wall should be strong enough to support the range hood. As for hollow wall or hollow plate,
the thickness of its solid part should be no less than 1'/s inch. As for concrete wall, the
installation can be directly operated. The range hood should be firmly fixed on the wall.
3. When drilling on the roof or ceiling, please make sure not to damage the electric lines as well as
any other hidden devices.
4. When moving the range hood for installing, cleaning or repairing, please make sure to wear
protective gloves to prevent your hands as the edge of the range hood.
5. The appliance is not intended for use by hurtby the (including children) with reduced physical sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
6. Children should be supervised to ensure that they do not play with the appliance.
Il Electrical Safety and Fire Prevention
1. The range hood should be connected to a standard power socket with safe grounding. The midway
connection, prolonged electric line or multi-socket wiring may cause electric shock, overheating and
even fire. The wiring task should only be carried out by a professional electrician in accordance with
current national or local electric safety regulations. Power off before wiring and make sure proper
measures have been taken to avoid unexpected connection.
2. If the supply cord is damaged,it must be replaced by a special cord or assembly available from
the manufacturer or its service agent.
3. All electrical parts including motor, switch and connector assembly, etc. should be strictly
prevented from water. Never rinse your range hood directly with water or high-pressure steam.
Never use the range hood when it is wetted to prevent electric shock.
4. Never touch the power plug, power switch or other electric parts with wet hand, otherwise, you
may get an electric shock.
5. Never discharge the exhaust of range hood through the hot flue which is used to release waste
smoke arising from coal and gas or other fuels.
6. When the cooking utensil catches fire, switch off the range hood immediately. Effective extinguishing
measures must be taken at once, such as covering the open flame with metal cover, turning off the
master gas valve and keeping flammable substance from the open flame etc.
RANGE HOOD
7. Never use an open flame under the range hood. To avoid the danger of fire, do not cook or grill
over an open flame under the range hood. When switched on, the range hood could draw
flames into the filter. Fat partical drawn into the range hood present a fire hazard.
8. All exhaust pipes, flues and devices should be non-flammable. Never
cover the range hood with flammable plastic film or paper.
9. The range hood should be fixed on the wall above the cook top. Keep a
height of 25%16~29%16 inch between the bottom of the range hood and
the surface of the cook top. The working temperature for the range hood
should not exceed 104 °F .
10. After the appliance fixed, the plug should be accessible.
11. Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact you local government for informa- _
tion regarding the collection systems available. If electrical appliances are disposed of in
landfills or dumps, hazardous substances can leak into the groundwater and get into the food
chain, damaging your health and well-being.
12. There is fire risk if cleaning is not carried out in accordance with the instructions.
l Danger of Toxic Fumes
1. Great care should be taken when using the gas cook top which may cause carbon monoxide
poison. Keep the room well ventilated.
2. When the range hood is under exhaust mode, make sure to install the damper along with the range
hood.
3. Clean the metal filter according to actual conditions.
B Suggestion and Description
1. Warranty service is not provided based on the following situations:
1) Failing to show invoice issued by authorized agents.
2) Damages of the parts due to the abused and wrong installation, improper use, improper
location, carelessness or other factors.
3) Repair and maintenance without the permission of FOTILE authorized agents.
4) Other situations that can't be controlled by FOTILE authorized agents.
In above case, FOTILE will be released from any responsibilities for the loss of personal
property, personal injury directly or indirectly caused by the product.
2. Never expose the range hood when your kitchen is being decorated. The construction material, dust,
lacquer, paintings as well as their released gases may corrupt the surface of the range hood and
make it tarnished. Therefore, please install the range hood after decoration.
3. Please clean the surface of range hood with neutral detergent and soft cloth. Wring out the cloth
when cleaning the switch and lamps.
4. Make sure to keep the appliance horizontally. Over long or more bends of exhaust pipe may
impair air function, and more relative operation noise will occur.
5. In case any malfunctions occur, please power off the range hood at once, and call our authorized
dealers or distributors for help.
6. This manual contains the information updated till the time when it is printed. WWe keen on techni-
cal innovation, we will reserve the rights to improve or modify the product and user's manual
without any prior notices. Some of the illustrations in this manual are for reference purpose only,
and subject to the actual products if there are any differences.
WARNING - TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
a) Never leave surface units unattended at high settings. Boilovers cause smoking and greasy
spillovers that may ignite. Heat oils slowly on low or medium settings.

FOTILE
READ AND SAVE THESE INSTRUCTION
Warning and Safety Instructions
<> To avoid any accidental risks or damages to the range hood, please read this user's manual
carefully before initial installation and use.
<> Make sure that the actual voltage and frequency are accorded with the ones clarified in this user's
manual to avoid any possible damages to the range hood.
<> The range hood is for residential use only.
<> Caution: For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
<> Unplug or disconnect the appliance from the power supply before servicing.
B Environmental Protection
1. Packing materials like absorption film, polystyrene and plastics may cause suffocation, so please
keep them away from the reach of infants and children.
2. Dispose the packing materials properly.
3. The replaced appliance should be sent to the local reclamation depot or recycling center. Keep
children away from those places to ensure their safety. The electric wire of the appliance should
be cut off to avoid misuse.
Il Mechanical Safety
1. Please use standard accessories provided by our company to ensure safe installation. (Make
sure to use the expansion pipe and expansion bolt provided by our company, in case the range
hood falls down accidentally); The hole drilled in the wall should precisely match the size of the
expansion pipe, otherwise, the range hood may loose and fall down.
2. The wall should be strong enough to support the range hood. As for hollow wall or hollow plate,
the thickness of its solid part should be no less than 1'/s inch. As for concrete wall, the
installation can be directly operated. The range hood should be firmly fixed on the wall.
3. When drilling on the roof or ceiling, please make sure not to damage the electric lines as well as
any other hidden devices.
4. When moving the range hood for installing, cleaning or repairing, please make sure to wear
protective gloves to prevent your hands as the edge of the range hood.
5. The appliance is not intended for use by hurtby the (including children) with reduced physical sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
6. Children should be supervised to ensure that they do not play with the appliance.
Il Electrical Safety and Fire Prevention
1. The range hood should be connected to a standard power socket with safe grounding. The midway
connection, prolonged electric line or multi-socket wiring may cause electric shock, overheating and
even fire. The wiring task should only be carried out by a professional electrician in accordance with
current national or local electric safety regulations. Power off before wiring and make sure proper
measures have been taken to avoid unexpected connection.
2. If the supply cord is damaged,it must be replaced by a special cord or assembly available from
the manufacturer or its service agent.
3. All electrical parts including motor, switch and connector assembly, etc. should be strictly
prevented from water. Never rinse your range hood directly with water or high-pressure steam.
Never use the range hood when it is wetted to prevent electric shock.
4. Never touch the power plug, power switch or other electric parts with wet hand, otherwise, you
may get an electric shock.
5. Never discharge the exhaust of range hood through the hot flue which is used to release waste
smoke arising from coal and gas or other fuels.
6. When the cooking utensil catches fire, switch off the range hood immediately. Effective extinguishing
measures must be taken at once, such as covering the open flame with metal cover, turning off the
master gas valve and keeping flammable substance from the open flame etc.
RANGE HOOD
7. Never use an open flame under the range hood. To avoid the danger of fire, do not cook or grill
over an open flame under the range hood. When switched on, the range hood could draw
flames into the filter. Fat partical drawn into the range hood present a fire hazard.
8. All exhaust pipes, flues and devices should be non-flammable. Never
cover the range hood with flammable plastic film or paper.
9. The range hood should be fixed on the wall above the cook top. Keep a
height of 25%16~29%16 inch between the bottom of the range hood and
the surface of the cook top. The working temperature for the range hood
should not exceed 104 °F .
10. After the appliance fixed, the plug should be accessible.
11. Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact you local government for informa- _
tion regarding the collection systems available. If electrical appliances are disposed of in
landfills or dumps, hazardous substances can leak into the groundwater and get into the food
chain, damaging your health and well-being.
12. There is fire risk if cleaning is not carried out in accordance with the instructions.
l Danger of Toxic Fumes
1. Great care should be taken when using the gas cook top which may cause carbon monoxide
poison. Keep the room well ventilated.
2. When the range hood is under exhaust mode, make sure to install the damper along with the range
hood.
3. Clean the metal filter according to actual conditions.
B Suggestion and Description
1. Warranty service is not provided based on the following situations:
1) Failing to show invoice issued by authorized agents.
2) Damages of the parts due to the abused and wrong installation, improper use, improper
location, carelessness or other factors.
3) Repair and maintenance without the permission of FOTILE authorized agents.
4) Other situations that can't be controlled by FOTILE authorized agents.
In above case, FOTILE will be released from any responsibilities for the loss of personal
property, personal injury directly or indirectly caused by the product.
2. Never expose the range hood when your kitchen is being decorated. The construction material, dust,
lacquer, paintings as well as their released gases may corrupt the surface of the range hood and
make it tarnished. Therefore, please install the range hood after decoration.
3. Please clean the surface of range hood with neutral detergent and soft cloth. Wring out the cloth
when cleaning the switch and lamps.
4. Make sure to keep the appliance horizontally. Over long or more bends of exhaust pipe may
impair air function, and more relative operation noise will occur.
5. In case any malfunctions occur, please power off the range hood at once, and call our authorized
dealers or distributors for help.
6. This manual contains the information updated till the time when it is printed. WWe keen on techni-
cal innovation, we will reserve the rights to improve or modify the product and user's manual
without any prior notices. Some of the illustrations in this manual are for reference purpose only,
and subject to the actual products if there are any differences.
WARNING - TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
a) Never leave surface units unattended at high settings. Boilovers cause smoking and greasy
spillovers that may ignite. Heat oils slowly on low or medium settings.

Control panel of EMS9017
b) Always turn hood ON when cooking at high heat or when flambeing food (i.e. Crepes Suzette,
Cherries Jubilee, Peppercorn Beef Flambe’).
o _ Kitchen Air Steward Auto Turbo Detection
c) Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. ‘ r— m—
d) Use proper pan size. Always use cookware appropriate for the size of the surface element. | ~
WARNING — TO REDUCE THE RISK OF INJURY TO PERSONS IN
THE
EVENT
OF
A
RANGE
TOP
GREASE
FIRE,
OBSERVE
THE
2ot
SR £ ‘
a) SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. " o ©
BE
CAREFUL
TO
PREVENT
BURNS.
If
the
flames
do
not
go
out
immediately,
EVACUATE
AND
|
!
|
l l
|
| |
5
_ Alarm Lighting Weak Strong Off Main Clock Screen Standby back
CALL THE FIRE DEPARTMENT. Clock Mode Mode interface Setting Luminance Interface arrow
b) NEVER PICK UP A FLAMING PAN — You may be burned. o _ _
Main interface Setting interface
c) DO NOT USE WATER, including wet dishcloths or towels — a violent steam explosion will result.
d) Use an extinguisher ONLY if:
1) You know you have a Class ABC extinguisher, and you already know how to operate it.
2) The fire is small and contained in the area where it started.
3) The fire department is being called.
4) You can fight the fire with your back to an exit.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the
risk of electric shock by providing an escape wire for the electric current. This appliance is equipped | iofing Dialay Leeiing Hower key Auts Turbo Hidh Lower
with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet button key Detection speed speed
that is properly installed and grounded.
WARNING - Improper grounding can result in a risk of electric shock.
Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt
Operation
Instruction
exists as to whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician
install an outlet near the appliance. EMS9016
TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.
B Turn On/Off, Time delay Function
:
Usage
B Firstly, let's be familiar with the range hood control interface.
Control panel of EMS9016 When Is touched, the range hood will standby for operation. If there is no operation
on stand it will be turned off automatically.
Strong/weak grade button Auto Turbo Detection When Is touched, the rang hood is working on or on standby, the hood will also be
| | turned off automatically after 2 minutes, and the light indicator will be flashing.
[ ] A
| (&
Il
Suction
Function
|
/
Lamp Light band Power and delay button
A

Control panel of EMS9017
b) Always turn hood ON when cooking at high heat or when flambeing food (i.e. Crepes Suzette,
Cherries Jubilee, Peppercorn Beef Flambe’).
o _ Kitchen Air Steward Auto Turbo Detection
c) Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. ‘ r— m—
d) Use proper pan size. Always use cookware appropriate for the size of the surface element. | ~
WARNING — TO REDUCE THE RISK OF INJURY TO PERSONS IN
THE
EVENT
OF
A
RANGE
TOP
GREASE
FIRE,
OBSERVE
THE
2ot
SR £ ‘
a) SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. " o ©
BE
CAREFUL
TO
PREVENT
BURNS.
If
the
flames
do
not
go
out
immediately,
EVACUATE
AND
|
!
|
l l
|
| |
5
_ Alarm Lighting Weak Strong Off Main Clock Screen Standby back
CALL THE FIRE DEPARTMENT. Clock Mode Mode interface Setting Luminance Interface arrow
b) NEVER PICK UP A FLAMING PAN — You may be burned. o _ _
Main interface Setting interface
c) DO NOT USE WATER, including wet dishcloths or towels — a violent steam explosion will result.
d) Use an extinguisher ONLY if:
1) You know you have a Class ABC extinguisher, and you already know how to operate it.
2) The fire is small and contained in the area where it started.
3) The fire department is being called.
4) You can fight the fire with your back to an exit.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the
risk of electric shock by providing an escape wire for the electric current. This appliance is equipped | iofing Dialay Leeiing Hower key Auts Turbo Hidh Lower
with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet button key Detection speed speed
that is properly installed and grounded.
WARNING - Improper grounding can result in a risk of electric shock.
Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt
Operation
Instruction
exists as to whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician
install an outlet near the appliance. EMS9016
TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.
B Turn On/Off, Time delay Function
:
Usage
B Firstly, let's be familiar with the range hood control interface.
Control panel of EMS9016 When Is touched, the range hood will standby for operation. If there is no operation
on stand it will be turned off automatically.
Strong/weak grade button Auto Turbo Detection When Is touched, the rang hood is working on or on standby, the hood will also be
| | turned off automatically after 2 minutes, and the light indicator will be flashing.
[ ] A
| (&
Il
Suction
Function
|
/
Lamp Light band Power and delay button
A

FOTILE RANGE HOOD
When & is touched under the standby or operational mode, all indicator lighting are % 18:00
light; after the range hood maintaining for 5 seconds under the Auto turbo detection
mode, and then returns to the normal mode and operate at the strong grade, the 9
indicator lighting of € button is semi-lighting, and the flue resistance shall be
checked
automatically,
when
the
flue
resistance
is
larger
than
the
setting
value,
the
motor turns to the Auto turbo detection mode to run automatically, at this time, the
indicator lighti f & button is fully-lighting; if the fl ist t to th |
Indicator lighting of & button is fully-lighting; If the flue resistance restores to the Press key to enter the panel lock interface. Slide to unlock.
normal condition, then after 30 seconds, it returns to the normal mode to run at the
strong grade. If you want to close such function, press & . B Suction Function
/ \ 18:00
Touch the button <%, the motor shall be started; the indicator lighting of fig@ button is
&
fully-lighting, and the range hood is running at the strong grade; then touch the button
again, the indicator lighting of <% button is semi-lighting, the range hood is running at Press [\ key to enter the alarm clock setting interface and set the countdown alarm
weak grade, touch again, the function is turned off. clock. Prompt tone will be heard when time is up. The prompt tone lasts for 2 minutes
(touch any key to stop the prompt tone) and it will stop automatically after 2 minutes.
Il lHlumination Function
/ \
~ - o the lght ©
Press the “-CO-"button, the light is turned on, and press the button again, the light is off.
““““““““““““““““““““““““““““““““““““““““ Press 4% key, the draught fan runs less powerfully. Press it again and it stops.
Press <% kevy. the draught fan runs powerfully. Press it again and it stops.
EMS9017
%
Y
g
P
y
g
p
%
18:00
¢ key enter the setting interface.
B Turn On/Off, Screenlock Function
18:00
ORCRONORG
Press () key and the device is turned off. (If “delay shutdown” is set, this function will
Press @ to set 0 - 30 minutes of shutdown time delay by rolling up and down.
Press to set the time and screensaver clock at the top of the interface by rolling up
and down (if screensaver is set to be showed).
be implemented.) All functions are immediately turned off to enter the black screen or - . .
Press =3- to set your favorite screen backlight luminance.
clock screensaver interface. Click anywhere on the screen again to enter the main Bress B to set whasther to.shiow the closk sereensaver oloek jriterface or not:
interface.
Press
4
to
return
to
the
main
interface.

FOTILE RANGE HOOD
When & is touched under the standby or operational mode, all indicator lighting are % 18:00
light; after the range hood maintaining for 5 seconds under the Auto turbo detection
mode, and then returns to the normal mode and operate at the strong grade, the 9
indicator lighting of € button is semi-lighting, and the flue resistance shall be
checked
automatically,
when
the
flue
resistance
is
larger
than
the
setting
value,
the
motor turns to the Auto turbo detection mode to run automatically, at this time, the
indicator lighti f & button is fully-lighting; if the fl ist t to th |
Indicator lighting of & button is fully-lighting; If the flue resistance restores to the Press key to enter the panel lock interface. Slide to unlock.
normal condition, then after 30 seconds, it returns to the normal mode to run at the
strong grade. If you want to close such function, press & . B Suction Function
/ \ 18:00
Touch the button <%, the motor shall be started; the indicator lighting of fig@ button is
&
fully-lighting, and the range hood is running at the strong grade; then touch the button
again, the indicator lighting of <% button is semi-lighting, the range hood is running at Press [\ key to enter the alarm clock setting interface and set the countdown alarm
weak grade, touch again, the function is turned off. clock. Prompt tone will be heard when time is up. The prompt tone lasts for 2 minutes
(touch any key to stop the prompt tone) and it will stop automatically after 2 minutes.
Il lHlumination Function
/ \
~ - o the lght ©
Press the “-CO-"button, the light is turned on, and press the button again, the light is off.
““““““““““““““““““““““““““““““““““““““““ Press 4% key, the draught fan runs less powerfully. Press it again and it stops.
Press <% kevy. the draught fan runs powerfully. Press it again and it stops.
EMS9017
%
Y
g
P
y
g
p
%
18:00
¢ key enter the setting interface.
B Turn On/Off, Screenlock Function
18:00
ORCRONORG
Press () key and the device is turned off. (If “delay shutdown” is set, this function will
Press @ to set 0 - 30 minutes of shutdown time delay by rolling up and down.
Press to set the time and screensaver clock at the top of the interface by rolling up
and down (if screensaver is set to be showed).
be implemented.) All functions are immediately turned off to enter the black screen or - . .
Press =3- to set your favorite screen backlight luminance.
clock screensaver interface. Click anywhere on the screen again to enter the main Bress B to set whasther to.shiow the closk sereensaver oloek jriterface or not:
interface.
Press
4
to
return
to
the
main
interface.

Press ({) key to enter Kitchen Air Steward interface. The range hood can detect air
quality automatically.
If air quality is good, the icon turns green and the motor does not run;
If air quality is slightly poor, the icon turns light red and hood works on weak mode;
If air quality is poor, the icon turns red and the hood works on strong mode.
18:00
.
Fs
Press &7 key and the range hood enters Auto turbo detection mode.
When high resistance is detected in the flue, the range hood directly runs the most
powerfully. When low resistance is detected, the range hood runs powerfully again.
When we put food material into the pan, the blast cooking smoke will be the heaviest.
When sensing the sound at this moment, the hood range directly runs the most power-
fully. When detecting no such sound in the pan, the hood range runs powerfully again.
I lllumination Function
18:00
2
Press x key and the lighting is on. Press it again and the lighting is off.
EMS9018
B Turn On/Off, Screenlock Function
If you want to turn on the range hood , please press the O key, the range hood is on
standby, then you can press another key. If you don’t have any operation on standby
within 2 minutes, it will be turned off automatically.
During working state or standby mode, Press the 8 key at least with 3 seconds, the range
hood beeps once, & flashes on, all keys will be locked, and clicks invalid, the range hood
will emits a beep; then press & at least with 3 seconds, the screenlock function is can-
celed and resume.
B Time delay Function
If you press (5 when the range hood is working or on standby, it also will be turned off
automatically after 2 minutes, if you need to cancel the delay, press any key.
I Suction Function
When #2 is touched under the standby or operational mode, all indicator lighting are
light; after the range hood maintaining for 5 seconds under the Auto turbo detection
mode, and then returns to the normal mode and operate at the strong grade, the
indicator lighting of &3 button is semi-lighting, and the flue resistance shall be
checked automatically, when the flue resistance is larger than the setting value, the
motor turns to the Auto turbo detection mode to run automatically, at this time, the
indicator lighting of &5 button is fully-lighting; if the flue resistance restores to the
normal condition, then after 30 seconds, it returns to the normal mode to run at the
strong grade. If you want to turn off such function, press &3 .
You press the <= key, the light indicator will show “on”, the relevant working condition
is “middle power”. Press the < key again, the light indicator will show “off 7, the relevant
working condition is “off ”

Press ({) key to enter Kitchen Air Steward interface. The range hood can detect air
quality automatically.
If air quality is good, the icon turns green and the motor does not run;
If air quality is slightly poor, the icon turns light red and hood works on weak mode;
If air quality is poor, the icon turns red and the hood works on strong mode.
18:00
.
Fs
Press &7 key and the range hood enters Auto turbo detection mode.
When high resistance is detected in the flue, the range hood directly runs the most
powerfully. When low resistance is detected, the range hood runs powerfully again.
When we put food material into the pan, the blast cooking smoke will be the heaviest.
When sensing the sound at this moment, the hood range directly runs the most power-
fully. When detecting no such sound in the pan, the hood range runs powerfully again.
I lllumination Function
18:00
2
Press x key and the lighting is on. Press it again and the lighting is off.
EMS9018
B Turn On/Off, Screenlock Function
If you want to turn on the range hood , please press the O key, the range hood is on
standby, then you can press another key. If you don’t have any operation on standby
within 2 minutes, it will be turned off automatically.
During working state or standby mode, Press the 8 key at least with 3 seconds, the range
hood beeps once, & flashes on, all keys will be locked, and clicks invalid, the range hood
will emits a beep; then press & at least with 3 seconds, the screenlock function is can-
celed and resume.
B Time delay Function
If you press (5 when the range hood is working or on standby, it also will be turned off
automatically after 2 minutes, if you need to cancel the delay, press any key.
I Suction Function
When #2 is touched under the standby or operational mode, all indicator lighting are
light; after the range hood maintaining for 5 seconds under the Auto turbo detection
mode, and then returns to the normal mode and operate at the strong grade, the
indicator lighting of &3 button is semi-lighting, and the flue resistance shall be
checked automatically, when the flue resistance is larger than the setting value, the
motor turns to the Auto turbo detection mode to run automatically, at this time, the
indicator lighting of &5 button is fully-lighting; if the flue resistance restores to the
normal condition, then after 30 seconds, it returns to the normal mode to run at the
strong grade. If you want to turn off such function, press &3 .
You press the <= key, the light indicator will show “on”, the relevant working condition
is “middle power”. Press the < key again, the light indicator will show “off 7, the relevant
working condition is “off ”

8. Remove the motor 9. Unscrew the screws
cover and decora- on the motor cover,
tive cover. and dismantle the
motor cover.
=
You press the &% key, the light indicator will show “on”, the relevant working condition
is “weak power”. Press the % key again, the light indicator will show “off ”, the relevant
10. Unscrew the screws 11. loosen the screw,
working condition is “off ”.
I lllumination Function
Press the £x key, the light is turned on, and press the key again, the light is off.
Cleaning and Maintenance
—)
1. Cut off the power
before cleaning.
2. All electric parts,
include motor,
switch, etc. should
be away from water.
. Please don't clean the
surface with rough
material like steel wire
ball, brush or coarse
cloth, etc. It will greatly
scratch the surface.
Neutral cleanser
4. Please don’t clean
with gasoline, acidic
substance, benzene,
solvent and other
chemical agents. If
you need to clean, please use neutral
cleanser, and wipe dry the appliance
surface by soft cloth after cleaning.
. If the stainless steel
panel is stained with
salty liquor, disinfec-
tant, bleaching
powder and other
cleanser, please wipe
it by wet cloth at once
and dry it by dry cloth.
\
6. The two ends of the
oil cup shall be held
by both hands,
maintain the horizon-
tal level of the ol
cup, and then move the oil cup towards the
front side of the range hood, remove the oll
cup and discharge the accumulated oil.
meanwhile turn downwards for certain degree, remove the ri
the air input cover with left hand, and unscrew the 2 screws fixed on the air input cover with
cross-screwdriver by right hand, then remove the air input cover.
7. Firstly, hold the front end of
ring suction plate with both
hands, turn downwards, so
that the fastener of ring
suction plate is out of place,
ng suction plate. And then hold
12
fixing on the air input
ring, and remove the
air input ring.
take off the air inlet.
Unscrew the locknut
In clockwise direc-
tion, and remove the
vane.
13. Screw off the locknut
clockwisely, Take out
the impeller.
Indication; please \ & a. Pour out the gathering oil periodically according to the oil cup
wipe the range hood surface once after every using the range hood; clean the air
inlet outer cover and inner cover every three days; clean the impeller once every
year (clean by professional people).
b. Please frequently clean the range hood surface, rectification plate and oil cup.
Normal Malfunction and Trouble Shooting
Range hood can't work, light can’t
light on
Motor can work, but light can’t light on
There is machinery shaking noise
Suction power is weak
Noisy
Haven't connected with
power supply
LED light is damaged
Screw is loosed
Too long distance between
range hood and stove
Too much ventilation near the
range hood leads to strong
convection
Exhaust pipe surface is
distorted
Check whether the plug is well inserted
or not
Check whether there is electricity or not
in the plug
Replace LED light (done by professional
people)
check whether the surface screws are
tightened or not
Lower the range hood installation
height (done by professional people)
Close some doors and windows
Reinstall exhaust pipe (done by
professional people)
5 1. Change the LED light: please contact FOTILE after-sale service center.
2 . If the range hood still can't work after getting rid of the above malfunctions, please
contact FOTILE service center .
By 14 12

8. Remove the motor 9. Unscrew the screws
cover and decora- on the motor cover,
tive cover. and dismantle the
motor cover.
=
You press the &% key, the light indicator will show “on”, the relevant working condition
is “weak power”. Press the % key again, the light indicator will show “off ”, the relevant
10. Unscrew the screws 11. loosen the screw,
working condition is “off ”.
I lllumination Function
Press the £x key, the light is turned on, and press the key again, the light is off.
Cleaning and Maintenance
—)
1. Cut off the power
before cleaning.
2. All electric parts,
include motor,
switch, etc. should
be away from water.
. Please don't clean the
surface with rough
material like steel wire
ball, brush or coarse
cloth, etc. It will greatly
scratch the surface.
Neutral cleanser
4. Please don’t clean
with gasoline, acidic
substance, benzene,
solvent and other
chemical agents. If
you need to clean, please use neutral
cleanser, and wipe dry the appliance
surface by soft cloth after cleaning.
. If the stainless steel
panel is stained with
salty liquor, disinfec-
tant, bleaching
powder and other
cleanser, please wipe
it by wet cloth at once
and dry it by dry cloth.
\
6. The two ends of the
oil cup shall be held
by both hands,
maintain the horizon-
tal level of the ol
cup, and then move the oil cup towards the
front side of the range hood, remove the oll
cup and discharge the accumulated oil.
meanwhile turn downwards for certain degree, remove the ri
the air input cover with left hand, and unscrew the 2 screws fixed on the air input cover with
cross-screwdriver by right hand, then remove the air input cover.
7. Firstly, hold the front end of
ring suction plate with both
hands, turn downwards, so
that the fastener of ring
suction plate is out of place,
ng suction plate. And then hold
12
fixing on the air input
ring, and remove the
air input ring.
take off the air inlet.
Unscrew the locknut
In clockwise direc-
tion, and remove the
vane.
13. Screw off the locknut
clockwisely, Take out
the impeller.
Indication; please \ & a. Pour out the gathering oil periodically according to the oil cup
wipe the range hood surface once after every using the range hood; clean the air
inlet outer cover and inner cover every three days; clean the impeller once every
year (clean by professional people).
b. Please frequently clean the range hood surface, rectification plate and oil cup.
Normal Malfunction and Trouble Shooting
Range hood can't work, light can’t
light on
Motor can work, but light can’t light on
There is machinery shaking noise
Suction power is weak
Noisy
Haven't connected with
power supply
LED light is damaged
Screw is loosed
Too long distance between
range hood and stove
Too much ventilation near the
range hood leads to strong
convection
Exhaust pipe surface is
distorted
Check whether the plug is well inserted
or not
Check whether there is electricity or not
in the plug
Replace LED light (done by professional
people)
check whether the surface screws are
tightened or not
Lower the range hood installation
height (done by professional people)
Close some doors and windows
Reinstall exhaust pipe (done by
professional people)
5 1. Change the LED light: please contact FOTILE after-sale service center.
2 . If the range hood still can't work after getting rid of the above malfunctions, please
contact FOTILE service center .
By 14 12

FOTILE
RANGE HOOD
=i =
Installation
Packing List
Complete Appliance
Wooden Screw
4 5x60
Strictly Execute
AAtte ntions
If it is necessary to move the gas o The range hood is heavy and the
stove before installing the range installation is complex, so the
Strictly Execute nstallation should be done by
professional people according to
the user manual.
hood, please close general gas
valve before moving the gas stove.
Pothook
Oil Cup
Decorative Cover
Safety Block
Strictly Execute
Please use specialized power Please wear protective golves to o
socket and it should be connected avoid your hands being hurt by
rang hood sharp edge. Strictly Execute wijth reliable ground wire to ensure
safety.
Decorative Cover
Pothook
Upper Seal Mat
Strictly Execute
The wall should be strong enough
to support the range hood,
Strictly Execute otherwise the range hood may
Please do not damage the electric o
wire and other hidden equipment
when drilling on wall. Power off
the range hood when installing. drop down and result in damage.
Cross Recess Head
Self-tapping Screw
ST 3.9%x9.5
User Manual
Expansion
Pipe $10X60
Exhaust Cover
Strictly Execute
Accessible parts may become hot when used with cooking appliances.
The air must not be discharged into a flue that is used for exhausting fumes from applianc-
es burning gas or other fuels
Failure to install the screws or fixing device in accordance with these instructions may
result in electrical hazards
This appliance is not intended for using by persons (including children) with reduced
physical,sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Cross recess pan head
self-tapping locking
screws M4 X 18
Ring suction plate
assembly
Strictly Execute
Please use accessories provided by FOTILE company to ensure safe and well
installation. Make sure the tightness between expansion pipe and wall hole, and
please don’t drill the hole too big, to avoid drop due to expansion pipe loosening.
Collision Avoidance
Elements
Installation Methods
Strictly Execute
Make sure the exhausting pipe can reach outdoors to avoid the fire and keep the
fresh air in the room. Please don’'t make the waste gas stay indoor, loft, garage, etc.
(This is only for ducted range hood)The waste air from the range hood couldn’t share
the same flue with other imflamble gas.
Strictly Execute
Package of new range hood:To keep a well environment, please deal with the plastic
package by environmental way.Packing material is not toy, so please keep the plastic
bags and box away from the infant to prevent such dangers as suffocation, etc.
_.Attentions
@
Attention
Suggest install the range hood after
finishing the kitchen decoration.
O
Forbidden
Make sure to keep the appliance
horizontal.
Strictly Execute
After finishing installation, make
sure the range hood can normally
work, please read carefully and
keep well the user manual.
L
Strictly Execute
Please abandon and recycle the
old range hood which can’t work
any more, to protect the environ-
ment.
Installation Suggestions
I Installation Position
The range hood is only for family use only; Please do not use the range hood under
other conditions.
The range hood should be installed above the stove. Keep parallel between the
blower outer cover bottom end and cabinet bottom end.
The temperature of the range hood should not be more than 104°F.
The wall should be none-flammable. Never install the range hood on the flammable
wooden wall.
By v 1

FOTILE
RANGE HOOD
=i =
Installation
Packing List
Complete Appliance
Wooden Screw
4 5x60
Strictly Execute
AAtte ntions
If it is necessary to move the gas o The range hood is heavy and the
stove before installing the range installation is complex, so the
Strictly Execute nstallation should be done by
professional people according to
the user manual.
hood, please close general gas
valve before moving the gas stove.
Pothook
Oil Cup
Decorative Cover
Safety Block
Strictly Execute
Please use specialized power Please wear protective golves to o
socket and it should be connected avoid your hands being hurt by
rang hood sharp edge. Strictly Execute wijth reliable ground wire to ensure
safety.
Decorative Cover
Pothook
Upper Seal Mat
Strictly Execute
The wall should be strong enough
to support the range hood,
Strictly Execute otherwise the range hood may
Please do not damage the electric o
wire and other hidden equipment
when drilling on wall. Power off
the range hood when installing. drop down and result in damage.
Cross Recess Head
Self-tapping Screw
ST 3.9%x9.5
User Manual
Expansion
Pipe $10X60
Exhaust Cover
Strictly Execute
Accessible parts may become hot when used with cooking appliances.
The air must not be discharged into a flue that is used for exhausting fumes from applianc-
es burning gas or other fuels
Failure to install the screws or fixing device in accordance with these instructions may
result in electrical hazards
This appliance is not intended for using by persons (including children) with reduced
physical,sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Cross recess pan head
self-tapping locking
screws M4 X 18
Ring suction plate
assembly
Strictly Execute
Please use accessories provided by FOTILE company to ensure safe and well
installation. Make sure the tightness between expansion pipe and wall hole, and
please don’t drill the hole too big, to avoid drop due to expansion pipe loosening.
Collision Avoidance
Elements
Installation Methods
Strictly Execute
Make sure the exhausting pipe can reach outdoors to avoid the fire and keep the
fresh air in the room. Please don’'t make the waste gas stay indoor, loft, garage, etc.
(This is only for ducted range hood)The waste air from the range hood couldn’t share
the same flue with other imflamble gas.
Strictly Execute
Package of new range hood:To keep a well environment, please deal with the plastic
package by environmental way.Packing material is not toy, so please keep the plastic
bags and box away from the infant to prevent such dangers as suffocation, etc.
_.Attentions
@
Attention
Suggest install the range hood after
finishing the kitchen decoration.
O
Forbidden
Make sure to keep the appliance
horizontal.
Strictly Execute
After finishing installation, make
sure the range hood can normally
work, please read carefully and
keep well the user manual.
L
Strictly Execute
Please abandon and recycle the
old range hood which can’t work
any more, to protect the environ-
ment.
Installation Suggestions
I Installation Position
The range hood is only for family use only; Please do not use the range hood under
other conditions.
The range hood should be installed above the stove. Keep parallel between the
blower outer cover bottom end and cabinet bottom end.
The temperature of the range hood should not be more than 104°F.
The wall should be none-flammable. Never install the range hood on the flammable
wooden wall.
By v 1

FOTILE RANGE HOOD
Bl Range Hood and Wall Cupboard Standard Combination Size Installation Diagram
EMS9018 Unit: inch(mm)
EMS9016
Hole Size of Cabinet on Top Surface
Hole Size of Cabinet on Top Surface Installation diagram for the top decorative
Installation diagram for the top decorative cover pothook.
35'/4" (900)
ek o 35'/4" (900)
|
cover
potnookK.
1
|15
(384)
.
|15'(384)
35'/4" (900) s 35'/4" (900) 5 = N
j
15"
(384)
_
155"
(384)
=
A
?R:;;;-)
:‘-;
LN
oo
o o N (©230)
s
R4
=
-
<
@
:
55—
lfl$ /\.‘f—'(fii%j ID$ k\ (;'2%0) — e o i P S S—
—T— T [ 8 S Exhaust pipe through cabinet Exhaust pipe through ceiling
Exhaust pipe through cabinet Exhaust pipe through ceiling _ Exhaust ~ Decorative N 5'g" (130)
Decorative Exhaust pipe Cupboard Ceilin i ¢ Pipe ovel Slipooaie Lelilg.
= Exhaust pipe cover Cupboard Ceiling actar) o HE = g [ 5" (130) 8 M/ / A
_ 2 - / / / 1 & | A f R / =8 |
Exhaust pipe Cupboard Ceiling e DI, % _ _ @ @ lr f 3 — : ‘ g : fi] e - ?‘5‘ L s :
' | o —= | & TS/ an SSIIEED A 3
e PP IIIIIES [ poopooaoron o = W mrmmmmnu% =5 é | = & =l
©
L
- .
[
i
©
I
IR
|
|
—=
=
=|
I
&
o
=
&
==
=
=)
I W
=
[ [ [
$
I
,
|3
|
T
&
[
7";“
nj
@
|
§
-,ga;_
I
:
5
i
—)
1
e
&l
8|
8|
13
|
ZE&E:J
¥
[
.
8
[
s
o
8l
&
|
73
|
i
3
|
Sl
338
|
v
@
g
|
2%
Tl
|
2%
Ssels
H.,
[
.
11
|2
£
[
115"
Ll
m|
2R
(238)
11%"
v
(338)
[ o (54)[ (186) | (54) Ol :}‘\_l' —~ 1137 16" | = (54)| (186) |(54) © Q | 13'/g" [ (294) 63‘% 0|8 | (294) I
e
w|n|
%
8
335
&
N
o
g
™
[
%
153
2lE
b
—
(339)
[
=
§E3
—
(335)
1
e
IS
|
o
1
[
i
{290)
&N
A
i
(420)
;
¢
[
1
35'/s"
(900)
w
o
[
207
'
35'/a"
(900)
b
[
207"
i
y
=
:11
.
[ l
1
|
]
=
9
(530)
[
o>
©
I
(530)
[ - 35'/g" (910) _ B 2(;;56) | = 357/s" (910) . 211" | z % | ) | z % | )
[ = ;E;_ [ [ 2 ;{; ] (535) I o< [ I W<
o o
|
y o
B
T
B
i
] T
-
.
&
x-
:
|
5‘:‘_
g
[
X
g
l
*
|
'
38
'
X
|
' Y3 [ f Y3 T X8 | S 1
[ ‘:% g [ I :3 ;8, I | o e | o =
L 4 [ [ =8 [ T ' T
[
n
=
[ [
o
=
[
¥ I ¥
EM8901 7 @ Blower outer cover bottom and cabinet bottom should be even.
Hole Size of Cabinet on Top Surface Installation diagram for the top decorative
cover pothook.
35'/4" (900) 35'/4" (900) ) ) )
_
[t
e
[
(33‘;)
g
Il
Preparation
before
installation
o M~
= R4/ N : . 5 " " ; "
9 A ®115) . - 1. Warning, Please don’t make sundries into exhaust pipe to avoid damaging the range hood.
(©230)
.
)
e
. .
@
——
Estimate
the
exhaust
pipe
position.
A
straight
and
short
exhaust
pipe
makes
_ _ _ - smoke extraction more smooth, please refer to installation diagram.
Exhaust pipe through cabinet Exhaust pipe through ceiling o ) _
A The joint between exhaust pipe and wall hole should be sealed with tape, and ensure
zes
.
.
5"(127)
. z
i =] ¢ m —naietpie; gower SN = firm connection between exhaust pipe and exhaust cover
|
Exhaust
pipe
Cupboard
Ceiling
|
5'(127)
E
[#';”””””;”””m%fl‘\f
/ /
=
1
ji'
.
p p
.
_
/ /
/
|
L
Y
/
SE
Ty
Lg
Too
small
wall
hole
will
affect
smoke
extraction,
therefore,
please
broaden
the
wall
hole
g : A = ' I 1 e —— 7 A Gt N
3+ 7 =it 3 = | ipe si iti
3 A ;% / | C\ : = [fres 3 . :“"g to fit exhaust pipe size under safety condition.
: == 5 % == "5 = HE 2.Tool preparation
fiw F 1 q. ‘V_'l i . .
:
o
|
2|
[Pre]
|
|2
B
1
3|
|
st
Sy
8y
1L__H
4
14":
Please
prepare
the
following
tools
before
range
hood
installation.
1
(54)|
"
(186)
|
(54)
o
é:"‘lmg
(355)
!
-
%sfi)
{132}
%5'3) fi
@
§
fi
(355)
.
. .
5
"
3o
"
Py 180 o TN 0 3 1 e 7l | (1). Impact electric drill (with drillbit of ® °/8" ) (2). Cross screwdrive
~
=
|0l
'~
=
g
el
|
~
QN
o
o
[N
=
i
| — G : | ———1 " N (3). Internal hexagonal wrench (M6) (4). Measuring taper
|
ssheooo)
B8
[
223’;“
| |
s
go0)
[E|8
.
_
207
5
H
ol
B
g
(530)
|
S
.5;
—|
(530)
(5).
Hammer
é
2
!
=
—
;9.
2
2
| fi % & | ; %8 Q
o o
I N1 n [ [ W (- | s | [
| |
= ¥=a [
| 38 | | 383 |
S e
£ 0 ~ O
' ~ 8 | ' ~ 8
'
Mt
PR
-13-
nre

FOTILE RANGE HOOD
Bl Range Hood and Wall Cupboard Standard Combination Size Installation Diagram
EMS9018 Unit: inch(mm)
EMS9016
Hole Size of Cabinet on Top Surface
Hole Size of Cabinet on Top Surface Installation diagram for the top decorative
Installation diagram for the top decorative cover pothook.
35'/4" (900)
ek o 35'/4" (900)
|
cover
potnookK.
1
|15
(384)
.
|15'(384)
35'/4" (900) s 35'/4" (900) 5 = N
j
15"
(384)
_
155"
(384)
=
A
?R:;;;-)
:‘-;
LN
oo
o o N (©230)
s
R4
=
-
<
@
:
55—
lfl$ /\.‘f—'(fii%j ID$ k\ (;'2%0) — e o i P S S—
—T— T [ 8 S Exhaust pipe through cabinet Exhaust pipe through ceiling
Exhaust pipe through cabinet Exhaust pipe through ceiling _ Exhaust ~ Decorative N 5'g" (130)
Decorative Exhaust pipe Cupboard Ceilin i ¢ Pipe ovel Slipooaie Lelilg.
= Exhaust pipe cover Cupboard Ceiling actar) o HE = g [ 5" (130) 8 M/ / A
_ 2 - / / / 1 & | A f R / =8 |
Exhaust pipe Cupboard Ceiling e DI, % _ _ @ @ lr f 3 — : ‘ g : fi] e - ?‘5‘ L s :
' | o —= | & TS/ an SSIIEED A 3
e PP IIIIIES [ poopooaoron o = W mrmmmmnu% =5 é | = & =l
©
L
- .
[
i
©
I
IR
|
|
—=
=
=|
I
&
o
=
&
==
=
=)
I W
=
[ [ [
$
I
,
|3
|
T
&
[
7";“
nj
@
|
§
-,ga;_
I
:
5
i
—)
1
e
&l
8|
8|
13
|
ZE&E:J
¥
[
.
8
[
s
o
8l
&
|
73
|
i
3
|
Sl
338
|
v
@
g
|
2%
Tl
|
2%
Ssels
H.,
[
.
11
|2
£
[
115"
Ll
m|
2R
(238)
11%"
v
(338)
[ o (54)[ (186) | (54) Ol :}‘\_l' —~ 1137 16" | = (54)| (186) |(54) © Q | 13'/g" [ (294) 63‘% 0|8 | (294) I
e
w|n|
%
8
335
&
N
o
g
™
[
%
153
2lE
b
—
(339)
[
=
§E3
—
(335)
1
e
IS
|
o
1
[
i
{290)
&N
A
i
(420)
;
¢
[
1
35'/s"
(900)
w
o
[
207
'
35'/a"
(900)
b
[
207"
i
y
=
:11
.
[ l
1
|
]
=
9
(530)
[
o>
©
I
(530)
[ - 35'/g" (910) _ B 2(;;56) | = 357/s" (910) . 211" | z % | ) | z % | )
[ = ;E;_ [ [ 2 ;{; ] (535) I o< [ I W<
o o
|
y o
B
T
B
i
] T
-
.
&
x-
:
|
5‘:‘_
g
[
X
g
l
*
|
'
38
'
X
|
' Y3 [ f Y3 T X8 | S 1
[ ‘:% g [ I :3 ;8, I | o e | o =
L 4 [ [ =8 [ T ' T
[
n
=
[ [
o
=
[
¥ I ¥
EM8901 7 @ Blower outer cover bottom and cabinet bottom should be even.
Hole Size of Cabinet on Top Surface Installation diagram for the top decorative
cover pothook.
35'/4" (900) 35'/4" (900) ) ) )
_
[t
e
[
(33‘;)
g
Il
Preparation
before
installation
o M~
= R4/ N : . 5 " " ; "
9 A ®115) . - 1. Warning, Please don’t make sundries into exhaust pipe to avoid damaging the range hood.
(©230)
.
)
e
. .
@
——
Estimate
the
exhaust
pipe
position.
A
straight
and
short
exhaust
pipe
makes
_ _ _ - smoke extraction more smooth, please refer to installation diagram.
Exhaust pipe through cabinet Exhaust pipe through ceiling o ) _
A The joint between exhaust pipe and wall hole should be sealed with tape, and ensure
zes
.
.
5"(127)
. z
i =] ¢ m —naietpie; gower SN = firm connection between exhaust pipe and exhaust cover
|
Exhaust
pipe
Cupboard
Ceiling
|
5'(127)
E
[#';”””””;”””m%fl‘\f
/ /
=
1
ji'
.
p p
.
_
/ /
/
|
L
Y
/
SE
Ty
Lg
Too
small
wall
hole
will
affect
smoke
extraction,
therefore,
please
broaden
the
wall
hole
g : A = ' I 1 e —— 7 A Gt N
3+ 7 =it 3 = | ipe si iti
3 A ;% / | C\ : = [fres 3 . :“"g to fit exhaust pipe size under safety condition.
: == 5 % == "5 = HE 2.Tool preparation
fiw F 1 q. ‘V_'l i . .
:
o
|
2|
[Pre]
|
|2
B
1
3|
|
st
Sy
8y
1L__H
4
14":
Please
prepare
the
following
tools
before
range
hood
installation.
1
(54)|
"
(186)
|
(54)
o
é:"‘lmg
(355)
!
-
%sfi)
{132}
%5'3) fi
@
§
fi
(355)
.
. .
5
"
3o
"
Py 180 o TN 0 3 1 e 7l | (1). Impact electric drill (with drillbit of ® °/8" ) (2). Cross screwdrive
~
=
|0l
'~
=
g
el
|
~
QN
o
o
[N
=
i
| — G : | ———1 " N (3). Internal hexagonal wrench (M6) (4). Measuring taper
|
ssheooo)
B8
[
223’;“
| |
s
go0)
[E|8
.
_
207
5
H
ol
B
g
(530)
|
S
.5;
—|
(530)
(5).
Hammer
é
2
!
=
—
;9.
2
2
| fi % & | ; %8 Q
o o
I N1 n [ [ W (- | s | [
| |
= ¥=a [
| 38 | | 383 |
S e
£ 0 ~ O
' ~ 8 | ' ~ 8
'
Mt
PR
-13-
nre

FOTILE
RANGE HOOD
3
4
o
6
7
8
By [
Installation Steps
. Demount the two screws which is for fixing the blower outer
cover, take down the blower outer cover and decorative
cover. Reserve $3/8” drill bit for the impact electric drill.
. Refer to Fig 1, set the right position on the wall to drill and
then firmly imbed the expansion pipe. Insert wooden
screws to tighten the fixed hook and decorative cover
hook; you can also use two ST3.9X9.5 self-tapping screw to
fix the decorative cover on the suspended celiling.
. Use eight M4x18 screws to fix the exhaust cover and sealing
ring on the top of appliance.
. Use ST3.9X9.5 self-tapping screws to fix the exhaust pipe on
the exhaust cover.
. Hang the hood firmly: face squarely- not slanting, side-look-
ing-the hood will tightly stick the wall and a little lacune.
. Install the exhaust pipe according to Fig 1: check the pipe
shell is not bulging and not shriveled, curve freely. The
exhaust pipe and wall should be tightly connected to
prevent smoke back, the backflow barrier blade should be
up and down smoothly.
. Confirm the churn drilling hole position according to Fig 2,
firmly imbed the expansion pipe, fix the safety block, and
screw in the wooden screw to fix.
. Blower outer cover and decorative cover installation
(1) Put the decorative cover inside of the blower outer cover.
(2) Take up the blower outer cover and decorative cover
meantime; inject the decorative cover into its pothook,
/YSafety block
E <]
e I
Fig.1
=
Fig.3
then push the decorative cover and blower outer cover along the pothook assem-
bly to the end.
(3) After pushing the decorative cover and blower outer cover to the end, the blower
outer cover will slip down slowly, and inject the blower outer cover buckle to the
blower rack, then insert the blower outer cover to the gap which is between top panel
and blower rack.
@ a. Please take down the blower outer cover before installation. \
b. If you install the range hood matching with cabinet, then exchange Step (4) and
Step (5).
‘ c. Please select right drill bit according to the drilling place specific situation.
9. Installation of ring suction plate
(1) Hold the front side of the ring suction plate firmly
with both hands, and place the left and right pothooks
on the rear side of ring suction plate into the left and
right hook racks of the smoke collecting hood;
(2) Prop the ring suction plate with both hands, make it
spiral upward, push in while the ring suction plate
spirals, finally make the touch claw on the ring suction Flg-4
plate insert into he touch button on the smoke collection
hood;
10. Install anti-collision accessories, firstly remove the double
faced adhesive tape (seeFigure 3), then stick the anti-colli-
sion accessories to the corner of the smoke exhaust (see W
Figure 4); /
11.
Install
the
oil
cup
assemblies(see
Figure
5);
Fig.5
12. Insert the host power plug into the power outlet.
Debugging
1. Connect the power plug.
2. Press the “-C- "button, check the light
3. Press the “ < "button, to check if the motor is at normal operation. If there is abnormality,
Please turn off the power immediately, and check if it is the problem of installation.
(Please contact with FOTILE distributor or service center.)
(1) The body of hood shakes heavily.
(2) The expansion pipe is loose.
(3) The impeller doesn’t work.
(4) Big noise from the impeller running.
(5) Abnormal noise from motor.
4. press the Power key, the turbine and the light are off.
By 2

FOTILE
RANGE HOOD
3
4
o
6
7
8
By [
Installation Steps
. Demount the two screws which is for fixing the blower outer
cover, take down the blower outer cover and decorative
cover. Reserve $3/8” drill bit for the impact electric drill.
. Refer to Fig 1, set the right position on the wall to drill and
then firmly imbed the expansion pipe. Insert wooden
screws to tighten the fixed hook and decorative cover
hook; you can also use two ST3.9X9.5 self-tapping screw to
fix the decorative cover on the suspended celiling.
. Use eight M4x18 screws to fix the exhaust cover and sealing
ring on the top of appliance.
. Use ST3.9X9.5 self-tapping screws to fix the exhaust pipe on
the exhaust cover.
. Hang the hood firmly: face squarely- not slanting, side-look-
ing-the hood will tightly stick the wall and a little lacune.
. Install the exhaust pipe according to Fig 1: check the pipe
shell is not bulging and not shriveled, curve freely. The
exhaust pipe and wall should be tightly connected to
prevent smoke back, the backflow barrier blade should be
up and down smoothly.
. Confirm the churn drilling hole position according to Fig 2,
firmly imbed the expansion pipe, fix the safety block, and
screw in the wooden screw to fix.
. Blower outer cover and decorative cover installation
(1) Put the decorative cover inside of the blower outer cover.
(2) Take up the blower outer cover and decorative cover
meantime; inject the decorative cover into its pothook,
/YSafety block
E <]
e I
Fig.1
=
Fig.3
then push the decorative cover and blower outer cover along the pothook assem-
bly to the end.
(3) After pushing the decorative cover and blower outer cover to the end, the blower
outer cover will slip down slowly, and inject the blower outer cover buckle to the
blower rack, then insert the blower outer cover to the gap which is between top panel
and blower rack.
@ a. Please take down the blower outer cover before installation. \
b. If you install the range hood matching with cabinet, then exchange Step (4) and
Step (5).
‘ c. Please select right drill bit according to the drilling place specific situation.
9. Installation of ring suction plate
(1) Hold the front side of the ring suction plate firmly
with both hands, and place the left and right pothooks
on the rear side of ring suction plate into the left and
right hook racks of the smoke collecting hood;
(2) Prop the ring suction plate with both hands, make it
spiral upward, push in while the ring suction plate
spirals, finally make the touch claw on the ring suction Flg-4
plate insert into he touch button on the smoke collection
hood;
10. Install anti-collision accessories, firstly remove the double
faced adhesive tape (seeFigure 3), then stick the anti-colli-
sion accessories to the corner of the smoke exhaust (see W
Figure 4); /
11.
Install
the
oil
cup
assemblies(see
Figure
5);
Fig.5
12. Insert the host power plug into the power outlet.
Debugging
1. Connect the power plug.
2. Press the “-C- "button, check the light
3. Press the “ < "button, to check if the motor is at normal operation. If there is abnormality,
Please turn off the power immediately, and check if it is the problem of installation.
(Please contact with FOTILE distributor or service center.)
(1) The body of hood shakes heavily.
(2) The expansion pipe is loose.
(3) The impeller doesn’t work.
(4) Big noise from the impeller running.
(5) Abnormal noise from motor.
4. press the Power key, the turbine and the light are off.
By 2

FOTILE RANGE HOOD
Main Technical Specifications
EMS9017
- _ _ _ _ Upper Assembly of air Power Electrical Electric Volute Vane Airinput Tightening Sound- Sound absorbing
Mdel EMSO16/EM9017/EM89018 Power line gasket discharge cover board box capacity assembly Motor assembly ring screw absorbing box cotton of fan cover
Voltage/Frequency 120V/60Hz
Rated power inputof the range hood 310W (light power included 2W)
Decorative cover
Speed High setting Low setting
CFM(HVI) 460 350
Noise(sones) 3.6 2.2 Prossing |
Noise(dB(A)) 64 58 IRk 7
Max static pressure(Pa) 500 |
Fan frame /
Caution: assemble \
1. The dB(A) noise in the above table is tested in accordance with IEC60704 standard, which indicates
the sound power level. Pressure level, to answer for : high setting 50 dB. low setting 44 dB.
2. The noise --Sones -- in the above table is tested in accordance with HVI-915-2015 In
HVI-accredited laboratories in American.
3. Such parameters as air volume and noise may have a deviation of less than 10%.
Top plate
Rear plate
®
GTb m . ~ HVI-2100 CERTIFIED RATINGS comply with by the Home Ventilating Institute for off-the-shelf products, as they are available to
c us
UsTED
consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in a state-of-the-art test laboratory.
Sones are a measure of humanly-perceived loudness, based on laboratory measurements.
Collection
CERTIFIED
smoke
cover
Fan cover Motor cover
Air input
Component
Name
Diagram
cover
Oil cup hook
EM 8901 6 assembly
Upper Assembly of air Electric Electrical Volute Vane Airinput Tightening Sound- Oil cup
Power line gasket discharge cover capacity box assembly Motor assembly ring sSETaw absorbing box assembly Left hook Right hook Ring suction Fastener LED lamp Sensor 1 Sensor 2 Sound absorbing Switch
bracket bracket plate assembly assembly box of volute assembly
Sound absorbing
cotton of fan cover
4/ Fan cover
Pressing
line plate \
Fan frame
assemble
Top plate \(_
(- PR
_ @
Sk
Parallel
——a@
\
Rear
plate
T
Decorative
cover
Collection /
smoke cover Tt |
Left hook
bracket
Right hook
bracket
AIr input
cover
Oil cup hook
assembly
\ Motor cover
\
Oil cup Ring suction Left fastener Right fastener Switch LED lamp Sound absorbing Hook of
assembly plate assembly assembly assembly assembly box of volute decorative cover
A7
-18-