Fotric 226B Instruction manual

www.fotric.com/support
FOTRIC 226B/223B Quick-Start Manual
Operation Guide
1. Connect FOTRIC thermal camera to the power supply, with Fotric authorized
power adaptor. And power on the FOTRIC thermal camera.
2. Connect the thermal camera to the computer with an USB cable.
3. Connect the USB cable of the DC visible Light camera to the computer.

www.fotric.com/support
4. Install and open to activate the WLIR-DC software by connecting to network.
Please MUST refer to the installation manual.
5. Choose language interface and Units.
6. Connect WLIR to the IR Camera and the DC Camera.

www.fotric.com/support
7. Adjust the focus of the IR Camera and match the IR image with the visible light
image.
8. Recommend to use HAWKAI mode., and Set Temperature Alarm for capture
photos.
9. Set alarm photo’s file location. When temperature screening is in operation,
an alarm will be triggered if an individual presents abnormal temperature.

www.fotric.com/support
Customer Support
1, Software and Installation Manual Download:
PC software WLIR-DC is a standard configuration of the product. Please visit the
following website to download its installation setup, and installation manuals:
www.fotric.com/support-wlir-dc
2, Product User Manual Download:
Before using the product, please visit the following website to download and read
the user manuals, FAQ documents and Operation videos:
http://www.fotric.com/support-wlir-dc
https://www.youtube.com/watch?v=8Wei0dy4AkQ&list=PLMdNbefH3FiWWiBQY
vcHbmCECguw1u72q&index=1
FOTRIC INC.
www.fotric.com
[e-mail]